Which two attributes describe key benefits of the InfiniBand network?
A. All Exadata database servers have a direct path link to each Exadata Storage Server.
B. Cell-to-cell communication uses Reliable Datagram Sockets (RDS) over InfiniBand to achieve low latency.
C. Expanding from two Full racks to four only requires adding an external InfiniBand switch to be at the top of the fat-tree topology.
D. Each InfiniBand link provides 10 Gigabits of bandwidth.
E. Oracle's interconnect protocol uses direct memory access (DMA) to eliminate buffer copies and reduce CPU use.
The mpstat output from OS Watcher shows a database node as being 90% idle on an average. What would you do to get a full picture of CPU utilization on the entire Exadata RAC cluster?
A. Average the mpstat id1 output from all the nodes.
B. Ask application users if they have noticed a slowdown in screen response.
C. Look for an increase in batch job servicing times.
D. A and B above
You get a Host Unreachable error when you attempt to connect to a server through a network terminal command line. What are two other ways in which you can connect?
100% Real QandAs | 100% Real Pass
A. Use the ILOM Web GUI.
B. Use the dcli command at the root prompt on a database node.
C. Attach a terminal device to the back panel of the server with a serial cable.
D. Connect by using SQL *Plus.
E. Log in as root on the database node using the Net1 IP address.
Identify three best practices for applying asmdeactivationoutcome es on Exadata Database Servers and Exadata Storage Servers?
A. Backing up database servers and storage cells is not recommended before performing planned maintenance.
B. Database server updates can be rolled back using the the "yum downgrade" procedure.
C. Bundle patches do not require testing before being installed on a production system.
D. It is recommended that Exadata systems with Data Guard configured use the "Standby First" patching approach.
E. Patching should never be interrupted due to a connection drop. It is therefore recommended that you use VNC or the screen utility.
F. Before patching cells in a rolling manner, you must check asmdeactivationoutcome amModestatus and make sure that cells on all disks are online and that disks can be deactivated.
Consider this CellCLI command:
CellCLI> CREATE GRIDDISK ALL HARDDISK PREFIX=data, size=423G;
Which two statements describe what happens when you execute this command?
A. It creates one 423 GB grid disk on the first available cell hard disk.
B. It creates one 423 GB grid disk on each available cell hard disk.
C. It creates grid disks on the outermost 423 GB that is available on each hard disk.
D. It creates grid disks on the innermost 423 GB that is available on each hard disk.
E. It creates an Exadata Smart Flash Cache on all flash drives.
Consider the following setup:
User A1 belongs to resource group High on Database A.
User B2 belongs to resource group Low on Database B.
User C3 is a user on Database C without any DBRM setup.
DBRM setup:
Database A: Resource group High gets 80% and Low gets 20%.
Database B: Resource group High gets 60% and Low gets 40%.
IORM setup:
Database A: Share=20, limit=5
Database B: Share=30, limit=10
Database C: 5 shares
Total number of shares in the IORM setup = 100
What percent of I/O will each database user theoretically be using when the Exadata storage unit I/O throughout is used 100% and no other databases but A, B, and C are running?
A. Al = 36%, B2=18%, and C3=9%
B. Al = 33%, B2=33%, and C3=33%
C. AI = 10%, B2=5%, and C3=20%
D. Al = 8%, B2=12%, and C3=5%
E. Al = 5%, B2=10%, and C3=85%
Which two statements are true about enabling write-back flash cache?
A. When enabling write-back flash cache in a non rolling manner, it is important to ensure that asmdeactivatonoutcome is set to YES and asmModestatus is set to ONLINE for all grid disks.
B. Before using write-back flash cache, you need to verify the minimum required versions.
C. Before write back-flash cache is enabled, you need to drop the Flash Cache first.
D. The setting flashCacheMode should be set to writeback by updating cellinit.ora and restarting cellsrv.
E. When enabling write-back flash cache in a rolling manner, dcli should be used to inactivate the grid disks on all cells first.
Consider the following software changes that are performed manually on a Linux server:
1.
Changes for Linux kernel firewall configuration
2.
Changes for custom performance monitoring tools
3.
Changes for security scan tools
4.
Changes for Linux system performance optimization
Which of the software changes listed are permitted on Exadata Storage Servers?
A. 1, 2, 3, and 4
B. only 3 '
C. none
D. only 2
E. only 1 and 2
F. only 2 and 3 100% Real QandAs | 100% Real Pass
Which is the best location to point your customer to, for finding the latest Exadata patches?
A. owner's guide
B. Patch database in MyOracle Support
C. MyOracle Support note 888828.1
D. MyOracle Support for database patches, ULN for OS patches, and Sun Support for Server and InfiniBand patches.
A customer has three databases named CC. FIN, and DW. The CC database is for their CallCenter. Even a slight decrease in the response time of the database would mean more people "on hold" in their data center. The orders received through the CallCenter are stored in the Finance (FIN) database. Both databases, CC and FIN, serve as sources for the Data Warehouse (DW) database. All databases use the same Automatic Storage Management (ASM) diskgroup and therefore, the same physical disks on Exadata storage. The customer wants to dynamically control the resources that are available for the CallCenter database because this has direct impact on their operations? Which option should be implemented?
A. DBRM on the CC database
B. DBRM on all the databases
C. IORM, because DBRM cannot be changed for an existing session
D. IORM and DBRM
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Oracle exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 1Z0-485 exam preparations and Oracle certification application, do not hesitate to visit our Vcedump.com to find your solutions here.