An LTM Specialist uploaded new releases .iso and .md5 files titled "BIGIP-FILENAME" via the GUI.
Which commands are run via the command line from the root directory to verify the integrity of the new .iso file?
A. cd /var/shared/images md5sum --check BIGIP-FILENAME.iso
B. cd /shared/images md5sum --check BIGIP-FILENAME.iso
C. cd /var/shared/images md5sum --check BIGIP-FILENAME.iso.md5
D. cd /shared/images md5sum --check BIGIP-FILENAME.iso.md5
An LTM Specialist must perform a hot fix installation from the command line.
What is the correct procedure to ensure that the installation is successful?
A. import the hot fix to the /var/shared/images directory check the integrity of the file with an md5 checksum tmsh apply sys software hotfix volume
B. import the hot fix to the /var/shared/images directory check the integrity of the file with an md5 checksum tmsh install sys software hotfix
C. import the hot fix to the /shared/images directory check the integrity of the file with an md5 checksum tmsh apply sys software hotfix volume
D. import the hot fix to the /shared/images directory check the integrity of the file with an md5 checksum tmsh install sys software hotfix
What is the recommended procedure for upgrading a major TMOS release on a BIG-IP platform?
A. 1. Renew the device license.
2.
Take a configuration backup.
3.
Reboot the device to the non-active volume.
4.
Upload the device code.
5.
Install device code to the current volume.
B. 1. Take a configuration backup.
2.
Upload the device code.
3.
Install device code to the non-active volume.
4.
Reboot the device to the non-active volume.
5.
Renew the device license.
C. 1. Renew the device license.
2.
Take a configuration backup.
3.
Upload the device code.
4.
Install device code to the non-active volume.
5.
Reboot the device to the non-active volume.
D. 1. Take a configuration backup.
2.
Reboot the device to the non-active volume.
3.
Renew the device license.
4.
Upload the device code.
5.
Install device code to the current volume.
Which procedure should an LTM Specialist follow to move a configuration from a 1500 to a 1600 hardware platform during an upgrade?
A. tmsh save sys config file filename.scf copy the file from the /var/local/scf directory from one device to the other tmsh load sys config file filename.scf
B. tmsh save sys backup file filename.scf copy the file from the /var/local/scf directory from one device to the other tmsh load sys backup file filename.scf
C. tmsh save sys backup file filename.scf copy the file from the /var/local/ucs directory from one device to the other tmsh load sys backup file filename.scf
D. tmsh save sys config file filename.scf copy the file from the /var/local/ucs directory from one device to the other tmsh load sys config file filename.scf
An LTM Specialist has installed a hotfix that updated the SCCP firmware package. Which command will ensure that the host subsystem and SCCP reboot?
A. reboot
B. full_box_reboot
C. shutdown -r now
D. The reboot should be initiated via the HTTPS administration GUI.
A device on the network is configured with the same IP address as the management address of the active LTM device, causing the management GUI to be inaccessible. Which two methods should the LTM Specialist use to access the LTM device in order to change the management IP address? (Choose two.)
A. Connect via ssh to the AOM IP address.
B. Connect via ssh to the management address.
C. Connect to the LTM device via serial connection.
D. Connect a monitor and keyboard to the LTM device.
E. Connect via ssh to the standby unit and connect via ssh across the serial link between the devices.
The LTM Specialist is in the process of creating a USB boot drive for the purpose of restoring the BIG-IP software to an LTM device. A separate LTM device has been selected for the purpose of creating the USB boot drive. The BIG-IP software ISO has already been uploaded and mounted on the separate LTM device.
Which command should the LTM Specialist use to trigger the LTM device to install the BIG-IP software to the USB boot drive?
A. tmsh
B. install
C. mkdisk
D. bigip_software_create
In which file would the LTM Specialist find virtual server configurations?
A. bigip.conf
B. bigip_sys.conf
C. bigip_base.conf
D. profile_base.conf
When re-licensing an LTM device from the command line interface, which tmsh command should the LTM Specialist use to generate the required information to provide on the F5 licensing portal?
A. tmsh run /util get-dossier
B. tmsh generate /sys dossier
C. tmsh list /sys registration-key
D. tmsh install /sys license registration-key
A stand-alone LTM device is to be paired with a second LTM device to create an active/standby pair. The current stand-alone LTM device is in production and has several VLANs with floating IP addresses configured. The appropriate device service clustering (DSC) configurations are in place on both LTM devices.
Which two non-specific DSC settings should the LTM Specialist configure on the second LTM device to ensure no errors are reported when attempting to synchronize for the first time? (Choose two.)
A. pools
B. VLANs
C. default route
D. self IP addresses
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only F5 exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 301B exam preparations and F5 certification application, do not hesitate to visit our Vcedump.com to find your solutions here.