Exam Details

  • Exam Code
    :350-601
  • Exam Name
    :Implementing and Operating Cisco Data Center Core Technologies (DCCOR)
  • Certification
    :CCNP Data Center
  • Vendor
    :Cisco
  • Total Questions
    :577 Q&As
  • Last Updated
    :Mar 30, 2025

Cisco CCNP Data Center 350-601 Questions & Answers

  • Question 541:

    DRAG DROP

    Refer to the exhibit.

    The VSAN 4041 and 4042 are exchanged between two Cisco MDS 9000 Series Switches called MDS-1 and MDS-2. The objective is to deploy a security mechanism on MDS-1 to allow MDS-2 to join the fabric exclusively. Drag and drop the code snippets from the bottom onto the boxes in the code to complete the MDS-1 configuration. Not all code snippets are used.

    Select and Place:

  • Question 542:

    DRAG DROP Refer to the exhibit.

    An engineer implements an MP-BGP deployment that must meet these requirements:

    1.

    Unicast traffic must flow through the Red link between the two autonomous systems.

    2.

    Multicast traffic must flow through the Green link.

    3.

    BGP must be configured to carry routing information and differentiate between unicast and multicast traffic to avoid RPF check failure. Drag and drop the SiteA commands from the right onto the blanks in the configuration on the left. Commands can be used more than once.

    Select and Place:

  • Question 543:

    DRAG DROP

    Drag and drop the telemetry concepts from the left onto their functions on the right.

    Select and Place:

  • Question 544:

    DRAG DROP

    Drag and drop the streaming telemetry component on the left to its function on the right. Not all components are used.

    Select and Place:

  • Question 545:

    DRAG DROP

    An engineer must authenticate EIGRP configuration on interface Eth1/1 of the Cisco Nexus 9000 Series Switch. Drag and drop the CU commands from the right to complete the EIGRP key authentication configuration on the left. Not all CLI commands are used.

    Select and Place:

  • Question 546:

    DRAG DROP

    Drag and drop the command snippets from the bottom onto the boxes in the code to complete a Python script that displays a list of interfaces on a Cisco Nexus 9000 Series Switch using on-box Python. Not all command snippets are used.

    Select and Place:

  • Question 547:

    DRAG DROP Refer to the exhibit.

    During a recent outage, a network engineer discovered that host A started to experience intermittent connectivity, when Leaf102 was down. Drag and drop the code snippets from the bottom onto the boxes in the code to resolve the problem. Not all code snippets are used.

    Select and Place:

  • Question 548:

    DRAG DROP Refer to the exhibit.

    An engineer implements a dynamically negotiated LACP port channel on SW1. The port channel members must be configured as active/standby ports with Eth1/2 as active and Eth1/1 as standby. The Eth1/1 interface is configured with default priority. Drag and drop the code snippets from the right onto the blanks in the code on the left to complete the Eth1/2 interface configuration for SW1. Not all code snippets are used.

    Select and Place:

  • Question 549:

    DRAG DROP

    All logins to a Cisco Nexus 9000 Series Switch must pass through the TACACS+ server at IP address 192.168.10.10. The configuration must meet these requirements:

    1.

    The TACACS+ server must be used for SSH and Telnet.

    2.

    The TACACS+ server key must be Cisco123!.

    3.

    Management VRF must be used for connectivity.

    4.

    The deployment must fail back to local credentials if the TACACS+ server fails to respond within 30 seconds.

    Drag and drop the code snippets from the right onto the blanks in the code on the left to complete the configuration. Not all code snippets are used.

    Select and Place:

  • Question 550:

    DRAG DROP

    An engineer must authenticate OSPF on interfaces of the Cisco Nexus 9000 Series Switch so that:

    1.

    eth1/1 uses clear text password.

    2.

    eth1/2 uses encrypted md5 password.

    Drag and drop the commands from the bottom onto the boxes in the code to complete the configuration. Not all commands are used.

    Select and Place:

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Cisco exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 350-601 exam preparations and Cisco certification application, do not hesitate to visit our Vcedump.com to find your solutions here.