Exam Details

  • Exam Code
    :350-801
  • Exam Name
    :Implementing and Operating Cisco Collaboration Core Technologies (CLCOR)
  • Certification
    :CCNP Collaboration
  • Vendor
    :Cisco
  • Total Questions
    :500 Q&As
  • Last Updated
    :Apr 16, 2025

Cisco CCNP Collaboration 350-801 Questions & Answers

  • Question 361:

    You are adding regions in Cisco Unified Communications Manager. Which codec(s) are selected when a call is placed if you set up the max audio bit rate to use 8 kbps?

    A. G.729

    B. G 729 and G.711ulaw

    C. G.711ulaw and G 711alaw

    D. G.722

  • Question 362:

    An incoming off-net call to a user fails. An engineer notices that the off-net call is G.711, but the phone accepts only G.729. Which media resource on a Cisco Unified Border Element and Cisco Unified Communications Manager must the engineer configure to manage the codec negotiation?

    A. transcoder

    B. CFB

    C. MOH

    D. MTP

  • Question 363:

    Which settings are needed to configure the SIP route pattern in Cisco Unified Communications Manager?

    A. pattern usage, IPv6 pattern, and SIP trunk/Route list

    B. pattern usage, IPv4 pattern, IPv6 pattern, and description

    C. pattern usage, IPv4 pattern, and SIP trunk/Route list

    D. SIP trunk/Route list, description, and IPv4 pattern

  • Question 364:

    A customer wants a video conference with five Cisco TelePresence IX5000 Series systems. Which media resource is necessary in the design to fully utilize the immersive functions?

    A. Cisco PVDM4-128

    B. software conference bridge on Cisco Unified Communications Manager

    C. Cisco Webex Meetings Server

    D. Cisco Meeting Server

  • Question 365:

    A Cisco TelePresence SX80 suddenly has issues displaying main video to a display over HDMI. Which command can you use from the SX80 admin CLI to check the video output status to the monitor?

    A. xStatus Video Output

    B. xCommand Video Status

    C. xConfiguration Video Output

    D. xStatus HDMI Output

  • Question 366:

    How does Cisco Unified Communications Manager perform a digit analysis on-hook versus off-hook for an outbound call from a Cisco IP phone that is registered to Cisco Unified CM?

    A. On-hook, Unified CM performs a digit-by-digit analysis, off-hook, Unified GM considers all digits were dialed and does not wait for additional digits.

    B. On-hook, Unified CM considers all digits were dialed and does not wait for additional digits, off-hook, Unified CM performs a digit-by-digit analysis.

    C. On-hook, by pressing the digits and entering "#" to process the call, Unified CM performs a digit-by-digit analysis; off-hook. Unified CM analyzes all digits as a string.

    D. On-hook, no digit analysis is performed, off-hook. Unified CM requires the "#* to start the digit analysis.

  • Question 367:

    Which access control group is required on an end user to allow Jabber to do deskphone mode?

    A. Allow Control of Device from CTI

    B. Standard CTI Enabled

    C. Standard CTI Allow Reception of SRTP Key Material

    D. Standard CTI Secure Connection

  • Question 368:

    A customer is deploying a SIP IOS gateway for a customer who requires that in-band DTMF relay is first priority and out-of-band DTMF relay is second priority.

    Which IOS entry sets the required priority?

    A. dtmf-relay rtp-nte sip-notify

    B. dtmf-relay cisco-rtp

    C. sip-notify dtmf-relay rtp-nte

    D. dtmf-relay sip-kpml cisco-rtp

  • Question 369:

    Which method is used to avoid toll fraud with Cisco Unified Communications Manager calls?

    A. call policy service

    B. TOLLFRAUD_APP

    C. default zone access rules

    D. class of service

  • Question 370:

    Which configuration tells a switch part to send Cisco Discovery Protocol packets that configure an attached Cisco IP phone to trust tagged traffic that is received from a device that is connected to the access port on the Cisco IP phone?

    A. Router# configure terminal Router(config)# interface gigabitethernet 5/1 Router(config-if)# platform qos trust extend

    B. Router# configure terminal Router(config)# interface gigabitethernet 5/1 Router(config-if)# platform qos trust extend cos 3

    C. Router# configure terminal Router(config)# interface gigabitethernet 5/1 Router(config-if)# platform qos trust extend cos 5

    D. Router# configure terminal Router(config)# interface gigabitethernet 5/1 Router(config-if)# platform qos extend trust

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Cisco exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 350-801 exam preparations and Cisco certification application, do not hesitate to visit our Vcedump.com to find your solutions here.