An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.
This information was gathered by the architect during the Discover Task of the Engagement Lifecycle:
There are applications which use IPv6 addressing.
Network administrators are not familiar with NSX-T Data Center solutions.
Hosts can only be configured with two physical NICs.
There is an existing management cluster to deploy the NSX-T components.
Dynamic routing should be configured between the physical and virtual network.
There is a storage array available to deploy NSX-T components.
Which risk was documented by the architect? (Choose the best answer.)
A. Network administrators are not familiar with NSX-T Data Center solutions.
B. Dynamic routing should be configured between the physical and virtual network.
C. There are applications which use IPv6 addressing.
D. There is a storage array available to deploy NSX-T components.
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.
This information was gathered during a workshop:
Migrating existing data center to KVM hosts.
Redundancy and high availability are required.
No component can be a single point of failure.
Which selection should the architect recommend? (Choose the best answer.)
A. Linux Bridge redundancy with Active/Active Mode and multiple pNICs with necessary binding
B. Linux Bridge redundancy with Active/Active Mode and single pNIC with static binding
C. vSS/vDS in Active/Standby Mode with necessary binding
D. vSS/vDS in Active/Active Mode with necessary pNICS and required binding modes
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.
This information was gathered during the Assessment Phase:
Data between two networks connected over a public network needs to be encrypted.
Certificate authentication is required.
Dynamic route learning is preferred.
Which selection should the architect include in their design? (Choose the best answer.)
A. Deploy a Tier-0 gateway in Active/Standby mode. Configure policy-based IPSec VPN with SHA512 with RSA as the hash algorithm.
B. Deploy a Tier-0 gateway in Active/Active mode. Configure route-based IPSec VPN with SHA512 with RSA as the hash algorithm.
C. Deploy a Tier-0 gateway in Active/Standby mode. Configure route-based IPSec VPN with SHA512 with RSA as the hash algorithm.
D. Deploy a Tier-0 gateway in Active/Active mode. Configure policy-based IPSec VPN with SHA512 with RSA as the hash algorithm.
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.
Which risk is documented by an architect? (Choose the best answer.)
A. The security team has a firewall communication matrix documented.
B. The team is not trained for NSX-T but have a very strong experience with vSphere.
C. Open communication between different application tiers is not allowed.
D. Aggregate N-S throughput at any given time should be at least 10G.
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was gathered during the Assessment Phase:
NSX-T will span across two sites for disaster recovery.
Public Load Balancer VIP should be accessible from a secondary site.
Distributed Firewall Policies should be available at a secondary site.
Routing capabilities should be maintained after failure.
NAT capabilities are required.
Which two selections should the architect include in their design? (Choose two.)
A. Use of the same ISPs across sites.
B. Use two separate ISPs across sites.
C. Use MTU to 1550 between sites.
D. Set MTU to 1550 between sites.
E. Use IP sets or groups to configure DFW rules.
Which selection is associated with the Review Task of the Engagement Lifecycle? (Choose the best answer.)
A. Gather and document requirements, assumptions, and constraints.
B. Build, deploy, implement, and test the design.
C. Measure performance against customer's objective.
D. Create and document the logical and physical design.
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.
This information was gathered during a workshop:
Any proposed solution must provide low latency. Any proposed solution must provide high throughput. Customer is running stock trading applications.
Which two selections should the architect recommend to meet high-performance workload requirements? (Choose two.)
A. Leverage ESXi as the compute host.
B. Use LACP for all uplink profiles.
C. Leverage KVM as the compute host.
D. Enable enhanced data path mode on the N-VDS.
E. Enable latency sensitivity mode on the N-VDS.
Which two benefits can be achieved using in-band management of an NSX Bare Metal Edge Node? (Choose two.)
A. Reduces storage requirements.
B. Reduces cost.
C. Preserves packet locality.
D. Reduces egress data.
E. Preserves switchports.
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.
This information was gathered by the architect during the Discover Task of the Enagagement Lifecycle:
There are applications which use IPv6 addressing.
Network administrators are not familiar with NSX-T Data Center solutions.
Hosts can only be configured with two physical NICs.
There is an existing management cluster to deploy the NSX-T components.
Dynamic routing should be configured between the physical and virtual network.
There is a storage array available to deploy NSX-T components.
Which constraint was documented by the architect? (Choose the best answer.)
A. Dynamic routing should be configured between the physical and virtual network.
B. There are applications which use IPv6 addressing.
C. Hosts can only be configured with two physical NICs.
D. There are enough CPU and memory resources in the existing management cluster.
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.
This information was gathered during the Assessment Phase:
Customer currently has a single 10 host vSphere cluster.
Customer wants to improve network security and automation.
Current cluster utilization and business policies prevent changing the existing vSphere deployment.
High-availability is important to the customer.
Which three selections should the architect include in their design? (Choose three.)
A. Apply vSphere DRS VM-Host anti-affinity rules to the virtual machines of the NSX-T Edge cluster.
B. Deploy at least two NSX-T Edge virtual machines in the vSphere cluster.
C. Deploy the NSX Controllers in the management cluster.
D. Apply vSphere Distributed Resource Scheduler (vSphere DRS) VM-Host anti-affinity rules to NSX Managers.
E. Remove 2 hosts from the cluster and create a new edge cluster.
F. Remove vSphere DRS VM-Host affinity rules to the NSX-T Controller VMs.
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only VMware exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 3V0-42.20 exam preparations and VMware certification application, do not hesitate to visit our Vcedump.com to find your solutions here.