Avaya Avaya Specialist 7003.1 Questions & Answers

• Question 1:

  A customer is upgrading an existing option 11C Rls. 5.5 chassis system with an SSC card Communication Server (CS) 1000E Rls. 7x Standard Availability with a single IP media Gateway 1000E chassis. As a part of this upgrade a CPMG Co-Resident call Server, Signaling Server Card and Gateway Controller has been included as part of the upgrade.

  What happens to the Terminal Number (TN) format during this upgrade?

  A. The TN format is automatically converted to the large system format of Loop-Shelf-Card-Unit for all assigned Terminal Numbers.

  B. The TN format is automatically converted to the large system format of Card-Unit for all assigned Terminal Numbers

  C. The TN format is automatically converted to the large system format of Loop-Shelf-Card-Unit for all new programmed Terminal Numbers

  D. The format is automatically converted to the large system format of Loop-Shelf-Card-Unit for IP phones only. All other devices assigned Terminal Numbers must be manually reprogrammed.

  Correct Answer: A

• Question 2:

  A Communication Server (CS) 1000E Rls. 7x customer has decided to implement UNIStim security with DTLS.

  Which statement regarding UNIStim security with DTLS is true?

  A. It is provided by the Secure Multimedia Controller 2450.

  B. It encrypts UNIStim signaling between the line Terminal Proxy Server and IP telephones.

  C. It provides media security between the IP telephones.

  D. It provides security between the Ip telephone and Call Server.

  Correct Answer: B

• Question 3:

  A customer with an existing Option 11C Rls. 5.5 chassis system plans to upgrade to a Communication Server (CS) 1000E Rls. 7x Standard Availability with a single IP Media Gateway (MG) 1000E chassis.

  To complete the upgrade, which component in the Option 11C must be replaced?

  A. SSC Card

  B. Call Processor

  C. Media Gateway

  D. Digital Line Card

  Correct Answer: A

• Question 4:

  A field calls about a problem enabling the DSPs on a new Communication Server (CS) 1000E SA Co-resident on release 7x. The DSPs on the MG 1 are all enabled but enabling the DSPs on MG2 and MG3 fail, and asked that the configuration be reviewed.

  MG1: CPMG 128 MG2: MGC 128 DSP DB in position 2 MG3: MGC 128 DSP DB in position 2

  After reviewing the configuration, an error in the DSP 128 VGW (DSP) configuration is identified? Which configuration option accurately reflects the proper configuration for the voice Gateway (DSP) channel?

  A. Numbering of VGW channels: 128Trunk data block VGWTerminal number: 004 0 02 0Designator field for trunk: DSPExtended trunk DSP DB 128Customer number: 00

  B. Numbering of VGW channels: 128Trunk data block VGWTerminal number:004 0 01 0Designator field for trunk: DSPExtended trunk DSP DB 128Customer number: 00

  C. Numbering of VGW channels: 128Trunk data block VGWTerminal number: 004 0 00 0Designator field for trunk: DSPExtended trunk DSP DB 128Customer number: 00

  D. Numbering of VGW channels: 128Trunk data block VGWTerminal number: 004 0 11 0Designator field for trunk: DSPExtended trunk DSP DB 128Customer number: 00

  Correct Answer: D

• Question 5:

  A customer is planning to install and configure a Commercial Off the Shelf (COTS) server IBM X3550 as a Signaling Server for their Communication Server (CS) 1000 Rls.. 7x network.

  Which two statements describe the software installation process? (Choose two)

  A. Before Linux Base software, the COTS server must be configured as a member server.

  B. Application software is loaded onto the COTS server using Deployment Manager.

  C. Linux Base software and application software are pre-loaded onto the COTS server at the factory

  D. Linux Base software is installed using command line interface and a bootable DVD containing software and operating system

  Correct Answer: BD

• Question 6:

  A customer has a Communication Server (CS) 1000 Rls. 7x Co-Resident system with a Media Gateway Controller and Media Cards and has completed the configuration of all elements and they are all active and known to the Call Server. The customer wants to add all the elements to the Security Domain.

  Which Overlay 117 commands used to add the element to the Security Domain?

  A. JoinSecDomain

  B. Join ucmSecurity element

  C. Register ucmsecurity device

  D. Register ucmSecurity system

  Correct Answer: D

• Question 7:

  Click the Exhibit button.

  

  A technician is asked to review the existing route information for the customer.

  According to the printout shown in the exhibit, type of route is this?

  A. A direct inward dial route

  B. An analog route

  C. A media services route

  D. An outgoing only route

  Correct Answer: C

• Question 8:

  A customer with a Communication Server (CS) 1000Rls. 6.0 SA is upgrading to Release 7.0. They have decided to replace the existing CPPM Call server CPPM Signaling Server with a CPPM Co- Resident Call Server, Signaling Server and Gateway Controller to free up a two card slots. A technician has decided to use the ELAN IP of the Call Server from the original system as the ELAN IP address of the Co-Resident server.

  Which action must be taken to consolidate the servers?

  A. Re-configure the Call Server IP address field in each Media gateway Controller

  B. Re-configure the Telephony Node Information to reflect the Call Server ELAN IP

  C. Re-configure the DSP Daughterbaords to reflect Call Server ELAN IP.

  D. Re-configure the network Routing Service to reflect the Call Server ELAN IP address.

  Correct Answer: A

• Question 9:

  Click the Exhibit button.

  

  A technician is asked to review the existing trunk information for a customer

  According to the Element manager screen capture shown in the exhibit, which type of trunk is this?

  A. DID

  B. VIRTUAL

  C. RAN

  D. H 323

  Correct Answer: B

• Question 10:

  A customer has completed the installation of the Communication Server (CS) 1000E Rls. 7 x system and wants to access Base Manager to configure and provision the Linux Base.

  Which two actions are true regarding access Base manager? (Choose two)

  A. Base Manager is accessible from the UCM element list

  B. Base Manager is accessible from Deployment Manager

  C. Base Manager is accessible via centralized login for standalone Linux servers

  D. Base Manager is accessible on every server with Linux Base in or out of a security domain

  Correct Answer: AC