Which command is used to turn off the front panel attention light for an IBM i partition?
A. WRKPRB (Work Problem)
B. STRSST (Start System Service Tools)
C. RSTATNIND (Reset Attention Indicator)
D. DSPMSG QSYSOPR (Display Messages on QSYSOPR message queue)
An administrator has been asked to create user profiles for4 operators.
In addition to adding each operator's user profile to the GRPOPR group, which sequence of actions will enable the operators to perform their functions, while maintaining the best possible system security?
A. Create a user profile (GRPOPR) with a user class of *SYSOPR Create a profile for each operator with no special authority
B. Create a user profile (GRPOPR) with no special authority Create a profile for each operator with *SAVSYS special authority
C. Create a user profile (GRPOPR) with *IOSYSCFG special authority Create a profile for each operator with no special authority'
D. Create a user profile (GRPOPR) with *SECADM special authority' and a user class of *SYSOPR Create a profile for each operator with no special authority'
A system has system values QCRTAUT set to *ALL and QSECURITY to 40.
A file, named PFILE, is secured by authorization list ALIST, and group profile AGROUP with authority' USE ALIST specifies "PUBLIC authority 'EXCLUDE, and AUSER with 'CHANGE authority.
What authority does AUSER have to PFILE?
A. *ALL
B. *USE
C. *CHANGE
D. *EXCLUDE
An administrator is planning to upgrade multiple systems and partitions to IBM i 7.1. A network based image will be used to hold the install image with current PTFs.
Which server type is supported with IBM i 7.1 to perform the install?
A. NIM
B. NES
C. NTP
D. TETP
An administrator has been provided with a POWERS system for a disaster recovery test. The Licensed Internal Code has been loaded and the disks initialized.
The recovery of IBM i 7.1, which had originally been saved on a Power 720, failed.
Which action will resolve the problem?
A. Use a D-Mode IPL to install the operating system.
B. Restart the recovery specifying the Target Release parameter as 7.1.
C. Install the operating system with the *PREV option and specify POWERS as the system to restore to.
D. Slip-install the LIC from the source system backup, and then continue with the remainder of the install.
A small IBM i partition has batch jobs in subsystem QBATCH that occasionally have very high CPU usage (more than 50%), impacting system performance.
The administrator needs to be able to observe these jobs on a 5250 session when they occur.
Which steps should the administrator take to display the jobs when they occur?
A. WRKACTJOB SBS(QBATCH) CPUPCTLMT(50) INTER VAL(10) and press E19 for auto refresh.
B. WRKSYSACT SBS(QBATCH), enter 50 in the CPU Filter field1 and press F19 for auto refresh.
C. WRKSYSACT, P20 to subset, include QBATCH, set the CPU Filter to 50% and press PIO for auto refresh.
D. WRKACTJOB, press P20 to subset, enter 50% for the CPU, use P16 to sequence by subsystem and press P19 for auto refresh.
An administrator is experiencing a significant reduction of I/O performance. After issuing the WRKDSKSTS command and pressing Fl 1 some of the disks in the list show "DEGRADED" rather than "ACTIVE". Why are some of the disks in "DEGRADED" status?
A. One of the disks in the RAID set has failed.
B. Other devices which share the I/O bus are currently very busy.
C. Read/write cache has been disabled on those disks for some reason.
D. High ambient temperature has forced the drives to temporarily run slower.
The WRKSYSSTS screen on a partition displays the "% CPU used" as 150.0. What does this information indicate?
A. The partition is using 150% of the minimum processor allocation in the partition profile.
B. The partition has two processors assigned, and the workload is using the equivalent of 1 .5 processors.
C. The partition is uncapped and using 150% of the maximum processor allocation in the partition profile.
D. The partition is uncapped and has been assigned additional processor by the hypervisor based on workload.
What is the correct command to save objects which are stored in the root file system?
A. SAV
B. SAVES
C. SAVDLO
D. SAVOBJ
Some system values were changed as the result of an audit. The administrator noticed that saves are faster, but that recoveries now take longer to complete. Which system value setting would cause this to happen?
A. Setting the QDSKCMP system value to 1 to compress the data on disk
B. Setting the QPERADJ system value to 2 to dynamically adjust the performance
C. Setting the QSAVACCPTH system value to 0 indicates that access paths will not be saved
D. Setting the QALWQBJRST system value to *ALWVLDERR to allow the restore of programs with validation errors to be restored
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only IBM exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your C4040-129 exam preparations and IBM certification application, do not hesitate to visit our Vcedump.com to find your solutions here.