A customer is trying to discover target ports using a subnet scan. The Unisphere Server Utility continuously fails to discover target ports.
What would cause the discovery process to fail?
A. CHAP is enabled on all target ports.
B. The host is not configured for high availability.
C. The host is not zoned to target ports.
D. Target port speeds are incorrectly set.
What is the result of configuring an iSCSI Linux driver on a host with multiple NICs within the same subnet?
A. Only a single NIC will be used.
B. All NICs will be used and IP traffic will be balanced across them.
C. Each NIC will be given a unique initiator name.
D. All NICs will be in standby mode until activated.
A customer is unable to connect to a CX4 after assigning an IP address to their iSCSI HBA. What needs to be configured in order to make a connection?
A. Initiator network parameters
B. iSCSI security
C. iSCSI.conf file
D. Initiator registration
Which hardware component is used to offload iSCSI and TCP processing from the host CPU?
A. iSCSI host bus adapter (HBA)
B. Dual NICs
C. NIC TCP Off-load Engine (TOE)
D. NIC
A customer's Windows 2008 server has four NICs connected to the private subnet used for iSCSI traffic. Server IP parameters are left at the default settings. How will iSCSI I/O traffic be distributed across the NICs?
A. One NIC will carry iSCSI traffic and the rest will be in standby.
B. The four NICs will carry iSCSI traffic in a round-robin pattern.
C. The four NICs will be divided into two active/passive pairs.
D. iSCSI traffic will be balanced across all four NICs.
What must be installed on a Windows host for the Unisphere Server Utility to configure iSCSI connections?
A. Microsoft iSCSI initiator
B. Microsoft Windows 2008 or later
C. Unisphere Host Agent
D. Unisphere Client
Which utility is recommended for the alignment of disks in a Windows 2003 SP2 environment?
A. diskpart
B. diskpar
C. fdisk
D. format
Which utility is recommended for the alignment of disks in a Linux environment?
A. fdisk
B. diskpart
C. diskpar
D. format
What does apm00091601607 represent in the IQN iqn.1992-04.com.emc:cx.apm00091601607 of an iSCSI port in a CLARiiON array?
A. Serial number of the CLARiiON array
B. Serial number of the iSCSI I/O module
C. WWNN of the CLARiiON array
D. WWPN of the CLARiiON array port
Which two scenarios can be implemented in iSCSI and FC SAN?
a.
Single server connected to both a CLARiiON FC and a CLARiiON iSCSI storage system.
b.
NIC and iSCSI HBA connections mixed in the same server.
c.
Servers with iSCSI HBAs and servers with NICs connected to the same iSCSI storage system.
d.
Servers with HBAs and servers with iSCSI HBAs connected to the same storage system.
A.
C and D
B.
A and C
C.
A and B
D.
B and D
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only EMC exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your E20-340 exam preparations and EMC certification application, do not hesitate to visit our Vcedump.com to find your solutions here.