What must be installed on the VNX prior to deploying the RecoverPoint Write splitter?
A. RecoverPoint Splitter Enabler only
B. RecoverPoint Driver and RecoverPoint Splitter Enabler
C. RecoverPoint License
D. Unisphere Service Manager
When using Deployment Manager to install RecoverPoint/SE, which zoning methods are available with Brocade switches?
A. Automatic and Manual
B. Manual and Semi-automatic
C. Automatic and Semi-automatic
D. Automatic and Virtual
What information is required to connect a new RecoverPoint cluster to an existing one?
A. WAN IP address and internal cluster name
B. RPA serial ID
C. Site ID and Management IP address
D. Internal cluster name only
You are installing RecoverPoint/SE, and have selected the automatic zoning option. There are four VNX ports in each fabric.
How many zones are automatically created on each fabric for a two-node RPA cluster?
A. 2
B. 3
C. 4
D. 5
Which connectivity protocols are used to interconnect RecoverPoint clusters?
A. FC and IP
B. FC and iSCSI
C. FC and FCoE
D. FCoE and IP
A customer has two VMAX arrays and three VNX arrays fronted by an EMC VPLEX. They wish to use RecoverPoint to protect their environment. How many licenses, and of which type, would be required for their environment?
A. 1 EX license
B. 1 SE license and 2 EX licenses
C. 5 EX licenses
D. 6 EX licenses
A customer has three VMAX arrays and one VNX array fronted by an EMC VPLEX. They want to use RecoverPoint to protect their environment.
How many licenses, of which type, would be required for their environment?
A. 1 EX license only
B. 4 EX licenses
C. 5 EX licenses
D. 1 SE license and 1 EX license
You are adding a VMAX array to a RecoverPoint/CL environment. What needs to be done?
A. Verify there is a zone that includes the RPA ports and the same VMAX front end ports that are zoned to the production host initiator.
B. Verify that the 16 new gatekeepers are in the same storage group as the repository and journals. Add the RPA initiator and port groups to the masking view.
C. After setting up the masking view use boxmgmt to log in to one of the site leader RPAs and be sure to tag all volumes that RecoverPoint is masked to including the production and copy volumes.
D. Verify that the VMAX is at Enginuity microcode 5876 or higher. After doing the LUN masking, enable Write-Protect ByPass (WPBP). Ensure that the proper license for the VMAX is installed on the RPAs.
A customer is installing a new RecoverPoint environment. All RPAs have been racked, cabled, and powered on. You have chosen to automatically discover the RPAs using Deployment Manager. After running the discovery, no RPAs are found.
What is the most likely cause of this issue?
A. No DHCP server on the network
B. Port 443 not open on the network
C. RecoverPoint/SE wizard selected
D. RPAs not configured into a cluster
An existing RecoverPoint cluster has four physical RPAs deployed with VMAX arrays. Which RPAs need to be masked to the VMAX gatekeepers in order to deploy the VMAX splitter?
A. RPA 1 and RPA 2
B. RPA 1 only
C. All RPAs in the cluster
D. RPA 2 only
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only EMC exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your E20-375 exam preparations and EMC certification application, do not hesitate to visit our Vcedump.com to find your solutions here.