HP HP ExpertONE Certification HP0-J65 Questions & Answers

• Question 111:

  A customer is interested in replacing their old storage arrays with HP 3PAR StoreServ StoreServ storage arrays. They are very concerned about data availability primary benefit that should be considered?

  A. mainframe support

  B. automated tiering

  C. clustered architecture

  D. static management

  Correct Answer: C

• Question 112:

  Which fabric rule is valid?

  A. In a C-Seriesfabric , the default access is Allow All

  B. Routing must be configured manually if switches from different vendors are present in the same fabric

  C. Dynamic Load Sharing (DLS) must be set to the default setting of ON for non-Continuous Access configuration

  D. If HP-UX hosts are in the fabric, the principal switch should have a Domain ID of 8

  Correct Answer: C

• Question 113:

  Documentation is required onde you have completed the implementation of your solution. You need to produce a topology map of the SAN description. Which information should you include in the topology map? (Select Two)

  A. Operation mode parameters of the storage controller

  B. a list of all server IP addresses that are connected

  C. Switch domain IDs D. model and serial number or all connected host

  E. World Wide Names of all nodes and devices

  Correct Answer: DE

• Question 114:

  Identify the primary benefit of using HP standard SAN fabric topologies according to the HP SAN Design Reference Guide

  A. There is an increase in management utilization and optimization of the bandswitch

  B. SAN fabric can be optimized for each vendor

  Correct Answer: A

• Question 115:

  Which feature must be supported in the Brocade 4GB SAN Switch for the HP c-Class BladeSystem to support port aggregation using N_Port_ID virtualization (NPIV) in the blade server environment?

  A. Blade Aggregation Operations mode

  B. Virtual WWN support by the Onboard Administrator

  C. Access Gateway mode

  D. Virtual Connect Addressing mode

  E. N_Port Uplink Virtualization mode

  Correct Answer: C

• Question 116:

  What is the correct statement about zoning in an interoperable fabric?

  A. Zoning is not allowed. The only way to segment a fabric is using the VSAN technology of CSeries switches.

  B. A mixture of domain ID, port number and WWPN zoning is allowed.

  C. WWPN zoning is the only allowed method.

  D. Domain ID and port number zoning are the only allowed methods.

  Correct Answer: C

• Question 117:

  What does a zoning map describe?

  A. routing paths between fabrics

  B. inter-node communication access

  C. different responsibilities for system and storage management

  D. different time zones in an extended SAN

  Correct Answer: B

• Question 118:

  A customer has a heterogeneus SAN environment. Which factor in this type of environment can cause interoperability issues?

  A. RAID array configurations

  B. number of the hosts

  C. operating system constrains

  D. fabric infrastructure

  Correct Answer: D

• Question 119:

  Three LUNs, sda, sdb and sdc, are connected to a Linux server. You shutdown the server and physically remove sdb. What happens after the server reboots?

  A. The LUNs sda and sdc are accessible, LUN sdb is renamed into sdvb simulating a virtual device.

  B. The LUNs sda and sdc are accessible, LUN sdb is not listed in the device scan.

  C. The LUN sda is accessible, LUN sdc is now sdb and accessible using this name.

  D. The LUNs sda and sdc are accessible, LUN sdb is listed as offline in the device scan.

  Correct Answer: C

• Question 120:

  Which statement describes the HP Adaptive Infrastructure?

  A. It is a bundle of hardware and management software which meets the requirements of all enterprise customers.

  B. It must be specifically designed for one application.

  C. It is a fixed solution which meets the customer requirements for the next decades.

  D. It synchronizes business and IT to rapidly respond to new business needs.

  Correct Answer: D