HP HP ATP HP2-T26 Questions & Answers

• Question 151:

  What does selecting the Allow Non-Bundled Versions provide in HP SUM?

  A. Other non-bundled products can be added to the bundle.

  B. All products will be updated including other manufacturers firmware and updates will be installed with the bundle.

  C. Old and new firmware files can be added and be installed with the bundle.

  D. All available firmware will be overwritten.

  Correct Answer: A

• Question 152:

  What must be verified when replacing the Virtual Connect FlexFabric modules in a c7000 enclosure?

  A. Baseboard Management Controller firmware on all server blades

  B. Virtual Connect Manager SSO authentication with Onboard Administrator of the enclosure

  C. Onboard Administrator firmware and LOM firmware on server blades

  D. ILO firmware of the blade server located in bay 1 only

  Correct Answer: C

• Question 153:

  What must be verified when replacing the Virtual Connect FlexFabric modules in a c7000 enclosure?

  A. Baseboard Management Controller firmware on all server blades

  B. Virtual Connect Manager SSO authentication with Onboard Administrator of the enclosure

  C. Onboard Administrator firmware and LOM firmware on server blades

  D. ILO firmware of the blade server located in bay 1 only

  Correct Answer: C

• Question 154:

  In the exhibit shown, what does the LED illuminated circle within the red square on the disk drive handle carrier for a Gen8 server indicate?

  

  A. There is drive activity.

  B. It is safe to unplug the drive.

  C. The drive is not part of an array.

  D. Do NOT unplug drive.

  Correct Answer: D

• Question 155:

  What are some general requirements that must be met to update Virtual Connect firmware? (Select three.)

  A. If using Virtual Connect Enterprise Manager (VCEM), the VC domains must be placed in Maintenance Mode, or the firmware updates are blocked.

  B. Run only one instance of the Virtual Connect Support Utility (VCSU) to access a single enclosure on a single client at one time.

  C. Make sure the VC domains are not in Maintenance Mode, so the firmware updates have direct access.

  D. Run multiple instances of the VCSU, with multiple clients, to access an enclosure faster.

  E. Do not close the console application when a firmware update is in progress as it may corrupt the firmware.

  Correct Answer: ABE

• Question 156:

  What must be used to update Virtual Connect firmware above version 3.0x when VCEM is used and managing other domains?

  A. VCM

  B. HP SUM Offline

  C. VCSU

  D. HP FDT

  Correct Answer: C

• Question 157:

  What is the correct UEFI shell command to display a list of drivers on an HP Integrity BL860c i2 Server Blade?

  A. drivers

  B. map

  C. drvdiag

  D. drvcfg

  Correct Answer: A

• Question 158:

  What is needed to support Enclosure Dynamic Power Capping?

  A. redundant power supply

  B. redundant onboard administrator

  C. Insight Control power management software

  D. Intelligent PDU and Intelligent extension bars

  Correct Answer: C

• Question 159:

  How many power supplies are needed for an (N+N) configuration in a c7000 enclosure?

  A. 3

  B. 4

  C. 5

  D. 7

  Correct Answer: B

• Question 160:

  Given the c7000 power supply configuration shown, which power supply modules should be connected to power circuit A to achieve N+N power redundancy?

  

  A. 4, 5, 6

  B. 2, 4, 6

  C. 1, 2, 3

  D. 1, 3, 5

  Correct Answer: C