NetApp NetApp Certifications NS0-504 Questions & Answers

• Question 161:

  You are about to replace a failed Brocade Fibre Channel switch. Which three steps do you take prior to connecting the switch in the SAN? (Choose three.)

  A. Force the new switch to be the principle switch.

  B. Change the domain ID of the replacement switch to the domain ID of the failed switch.

  C. Clear all zoning configurations on the replacement switch.

  D. Change the core PID format of the replacement switch to the core PID format of the failed switch.

  E. Preload the zoning information from the fabric onto the new switch.

  Correct Answer: BCD

• Question 162:

  Which native GUI switch tool is used to manage Cisco MDS-Series switches and directors?

  A. Operations Manager

  B. Fabric Manager

  C. Web Tools

  D. Data Fabric Manager

  Correct Answer: B

• Question 163:

  Which configuration for primary block (FC and iSCSI) data does NetApp best practices recommend? (Choose two.)

  A. single controller single shelf

  B. single controller multiple shelves

  C. dual controller single shelf

  D. dual controller multiple shelves

  Correct Answer: CD

• Question 164:

  After completing the configuration of a new Brocade Fibre Channel switch, which command do you use to verify your configuration?

  A. switchshow

  B. show config

  C. configshow

  D. cfgshow

  Correct Answer: C

• Question 165:

  When booting your NetApp storage system for the first time the system fails to boot. What should you do first to address this problem?

  A. You turn off your storage system and disk shelves, and then turn on the disk shelves. You then check the quick reference card that came with the disk shelf for information about LED responses.

  B. You re-download the boot image to the compact flash card, then reboot the system.

  C. You look for a description of the problem on the LCD and console. You then follow the instructions, if provided, on the LCD and console.

  D. You verify disk shelf compatibility and check the disk shelf IDs to verify that the disk shelf 1 (for DS14 series) must be connected to your system.

  Correct Answer: C

• Question 166:

  You are booting a NetApp storage system for the first time. In which order should the various components be powered on?

  A. any tape backup devices, disk shelves, network switches, NetApp controller heads

  B. NetApp controller heads, disk shelves, any tape backup devices, network switches

  C. NetApp controller heads, disk shelves, network switches, any tape backup devices

  D. network switches, disk shelves, any tape backup devices, NetApp controller heads

  Correct Answer: D

• Question 167:

  When setting up a VLAN for administrative security purposes, which four ports are the only important ports to include in the VLAN? (Choose four.)

  A. Storage Controllers Management Ethernet ports

  B. FC Switches Ethernet port

  C. Hosts iSCSI HBA Ethernet port

  D. Ethernet Switches Management port

  E. Storage Controller iSCSI Ethernet Target ports

  F. Hosts NIC Ethernet port

  Correct Answer: ABDF

• Question 168:

  What is the default Ethernet packet size (or MTU - Maximum Transmission Unit) for Ethernet ports on Ethernet switches?

  A. 2112 bytes

  B. 9000 bytes

  C. 1500 bytes

  D. 12000 bytes

  Correct Answer: C

• Question 169:

  A company wants to use jumbo frames in their Ethernet network. They should set the packet size to which industry conventional value?

  A. 1200

  B. 1500

  C. 9000

  D. 12000

  Correct Answer: C

• Question 170:

  A company wants to use jumbo frames to improve performance with their iSCSI network. When setting up the Ethernet switches for jumbo frames, which three components need to be configured? (Choose three.)

  A. Ethernet port on Management Console

  B. Ethernet port on RLM

  C. Ethernet port on host system

  D. Ethernet port on storage device

  E. Ethernet port on FC switch

  F. Ethernet switch ports being used

  Correct Answer: CDF