CompTIA CompTIA Server+ SK0-003 Questions & Answers

• Question 351:

  Which of the following archiving methods only backs up data that has changed since the previous backup?

  A. Differential

  B. Copy

  C. Incremental

  D. Snapshot

  Correct Answer: C

• Question 352:

  A failure of the primary data center has occurred. A warm site is available for use. Which of the following should be done FIRST to bring the critical applications online?

  A. Run cabling and power to the warm site.

  B. Restore data to the equipment.

  C. Transfer all data tapes over to the warm site.

  D. Restore least critical applications online to test to make sure the site is functioning.

  Correct Answer: B

• Question 353:

  A high availability solution must be designed for a single file server. Data must be replicated between the disks to ensure a failure of one disk does not bring down the server. Which of the following meets these requirements?

  A. RAID 1

  B. RAID 0

  C. Active/passive cluster

  D. Disk-to-disk

  Correct Answer: A

• Question 354:

  The staff is not able to access a database server. The server has an 'Operating System not found' error and is set to boot from a fiber channel SAN. All other database servers are set to boot from the SAN and access the same switch and data as this database server. Which of the following is the MOST likely cause of the problem?

  A. The SAN is offline

  B. Fiber channel switch

  C. Multiple failed drives in the SAN

  D. HBA

  Correct Answer: D

• Question 355:

  After a critical service failure occurs the server keeps rebooting every fifteen minutes not giving an administrator enough time to troubleshoot the failure. Which of the following does the administrator need to do to allow enough time to work on the system to troubleshoot the problem?

  A. Modify boot.ini file

  B. Disable automatic reboot on service

  C. Press F6 at boot up

  D. Clear cache

  Correct Answer: B

• Question 356:

  After a server inspection, an administrator notices a single drive failure on a server configured with RAID 5. Which of the following is the NEXT step to start rebuilding the array?

  A. Reestablish the mirror array.

  B. Perform online volume expansion.

  C. Insert hot plug drive.

  D. Move data to another volume.

  Correct Answer: C

• Question 357:

  An administrator installs a new network card in a properly functioning DC. During the Windows boot up process the DC bluescreens. Which of the following is the NEXT step?

  A. Press F8 and boot to Directory Services Restore Mode.

  B. Press F8 and boot to Last Known Good Configuration.

  C. Reboot the server again.

  D. Press F8 and boot to Safe Mode.

  Correct Answer: B

• Question 358:

  A server has had a drive fail in its storage RAID set. The administrator swaps the drive with a replacement and the RAID set does not automatically start to rebuild the replaced drive. Which of the following utilities would MOST likely be used to initialize the rebuilding of the replacement drive?

  A. Net use

  B. Array management

  C. Fdisk

  D. Disk Management Plug-in

  Correct Answer: B

• Question 359:

  A Windows server has rebooted by itself several times. There are several functioning non- Windows servers in the same rack that are connected to the same uninterruptible power supply (UPS). Which of the following is the MOST likely cause of the reboots?

  A. The UPS is malfunctioning.

  B. The user traffic to the server is too high.

  C. A BSOD is occurring.

  D. The non-Windows servers cannot be located on the same UPS as the Windows server.

  Correct Answer: C

• Question 360:

  Which of the following is a benefit of application virtualization?

  A. The need for multiple licenses of any software is unnecessary.

  B. Interoperability of disparate programs is easily attained.

  C. Server loads are greatly reduced from lowered traffic.

  D. Applications are easily accessible from anywhere on the LAN.

  Correct Answer: D