VMware VMware Certifications VCP5-DCV Questions & Answers

• Question 51:

  An administrator needs to unmount a datastore that is also used for HA storage heartbeats.

  What is the least disruptive method for an administrator to perform this activity on a slave HA host?

  A. On the Datastore Heartbeating tab, unmount the datastore normally and confirm a new datastore has been selected.

  B. On the Datastore Heartbeating tab, specify an alternate datastore, then unmount the datastore normally.

  C. Disable HA datastore heartbeats, then unmount the datastore.

  D. Reduce the number of heartbeat datastores, then remove the datastore from the heartbeat list.

  Correct Answer: B

• Question 52:

  What is a characteristic of Virtual SAN?

  A. It supports Virtual Machine Storage Policies.

  B. It supports multiple Virtual SAN clusters for each host.

  C. It supports native snapshots and SE Sparse disks.

  D. It supports storage attached through USB, Fibre Channel, or iSCSI.

  Correct Answer: A

• Question 53:

  Which two steps can an administrator take to upgrade an existing VMFS2 datastore to VMFS5? (Choose two.)

  A. Attach the VMFS2 datastore to an ESX 3.x host and upgrade it to VMFS3

  B. Attach the VMFS2 datastore to the vSphere 5 host and upgrade it to VMFS3

  C. Upgrade the datastore from VMFS3 to VMFS5 on a vSphere 5 host

  D. Upgrade the ESX host attached to the storage to vSphere 5

  Correct Answer: AC

• Question 54:

  A vSphere administrator needs to place an ESXi host in maintenance mode to replace a hardware component. This host is a member of a Virtual SAN cluster that uses Automatic Mode Disk Groups. Availability of virtual machines running on this host is critical. HA and DRS are enabled on the Virtual SAN Cluster. Otherwise, the Virtual SAN cluster uses default values. Which action should the administrator take to automatically guarantee availability of virtual machines with the fastest migration time?

  A. Select Enter Maintenance Mode and accept the default values

  B. Select Enter Maintenance Mode and select Full Data Migration option

  C. Select Enter Maintenance Mode and select No Data Migration option

  D. Migrate the virtual machines to another host and datastore then select Enter Maintenance Mode

  Correct Answer: A

• Question 55:

  An administrator has created a Virtual SAN Cluster using Automatic Mode Disk Groups. There is very little storage space left in the cluster. The administrator has access to an iSCSI storage array.

  Which approach should the administrator take to expand the Virtual SAN Cluster?

  A. Add new hosts to the cluster with available local disks then click the Claim Disks icon in the Disk Management section under the Virtual SAN tab.

  B. Add new disks to the hosts in the cluster then click the Claim Disks icon in the Disk Management section under the Virtual SAN tab.

  C. Add new hosts to the cluster with available local disk. No further action is required to claim the added storage.

  D. Provision new LUNs on the iSCSI storage and present one LUN to each host in the cluster. No further action is required to claim the added storage.

  Correct Answer: C

• Question 56:

  An administrator is considering using NPIV to assign WWNs to virtual machines. Virtual machine portability is a major concern. Why would NPIV be inappropriate for this deployment?

  A. Virtual machines using NPIV must use DirectPath I/O.

  B. Storage vMotion is not supported using NPIV.

  C. vMotion is not supported using NPIV.

  D. Enabling NPIV requires SR-IOV supported hardware.

  Correct Answer: B

• Question 57:

  An administrator of a secure environment needs to add an iSCSI target to a new ESXi host using the vSphere client. The administrator has configured discovery and performed a rescan operation, but the iSCSI target does NOT appear.

  Which action should the administrator take for the target to appear in the vSphere client?

  A. Configure appropriate CHAP authentication settings

  B. Bind a VMkernel port to the iSCSI initiator

  C. Configure Jumbo Frames prior to adding iSCSI targets

  D. Enable iSCSI in a vSphere Distributed Switch configuration

  Correct Answer: A

• Question 58:

  -- Exhibit --- Exhibit -

  

  Which field should an administrator add to a Virtual SAN Disk Group under the Device Backing settings to monitor the health of disks in the Disk Group?

  A. Issue

  B. Operational Status

  C. Capacity

  D. Transport Type

  Correct Answer: A

• Question 59:

  An administrator is deploying vSphere using a NAS device as the shared storage system. The administrator has already created a VMkernel port, enabled the NFS client, and configured a mount point accessible to the hosts. Which additional configuration is required before the datastore can be used to create virtual machines?

  A. The ESXi hosts must have root access to the datastore.

  B. The NAS must support NFS version 4.

  C. Port binding must be configured on the VMkernel port.

  D. The MTU on the VMkernel port must be set to 9000.

  Correct Answer: A

• Question 60:

  An administrator has configured multi-pathing using an Fiber Channel array in an active- active configuration.

  What is the expected behavior of an ESXi host when a failed preferred path becomes available using the Fixed path selection policy for this array type?

  A. It automatically reverts to the preferred path.

  B. It continues using the current path until it is manually reverted.

  C. It resumes load balancing across all available paths.

  D. It reverts to the preferred path after the host has been restored and rebooted.

  Correct Answer: A