How are Logical Firewall rules applied to affected virtual machines?
A. They are pushed by the NSX Controllers into all the ESXi hosts in the same Transport Zone.
B. They are pushed by the NSX Manager to the ESXi hosts running the source and/or destination virtual machines.
C. They are pushed by the NSX Controllers to the ESXi hosts running the destination virtual machines.
D. They are pushed by the NSX Manager to all the ESXi hosts in the NSX environment.
An administrator wishes to control traffic flow between two virtual machines. The virtual machines are in the same subnet, but are located on separate ESXi hosts. The administrator deploys an Edge Firewall to one of the hosts and verifies the default firewall rule is set to deny, but the two virtual machines can still communicate with each other.
What task will correct this issue?
A. Configure both ESXi host firewalls to deny traffic from the virtual machine on the other host.
B. Deploy another Edge Firewall on the host running the second virtual machine.
C. Remove any other firewall appliances that may exist on either of the ESXi hosts.
D. Deploy a Distributed Firewall with firewall rules to prevent traffic between the virtual machines.
An administrator manages a TFTP server virtual machine that is connected to a Logical Switch with a VNI of 7321. The TFTP server has been configured to use port 1069. An NSX Edge Service Gateway is connected to VNI 7321 and has an uplink interface with access to the physical network. Assume external users can reach the Service Gateway.
What should the administrator configure to ensure external connections to the TFTP server are successful?
A. Create a DNAT rule with the original port of 69 and translated port of 1069.
B. Create a SNAT rule with the original port of 1069 and translated port of 69.
C. Create a SNAT rule with the original port of 69 and translated port of 1069.
D. Create a DNAT rule with the original port of 1069 and translated port of 69.
Which two actions take place when an active NSX Edge instance fails? (Choose two.)
A. Once the original NSX Edge instance is recovered, it preempts the other NSX Edge instance and takes over the active role.
B. The standby NSX Edge instance becomes the active instance and requests routing updates from the routing neighbors.
C. Once the original NSX Edge instance is recovered, the NSX Manager attempts to place it on a different host from the other NSX Edge instance.
D. The standby NSX Edge instance becomes the active instance and retains any routing neighbor adjacencies.
Which two statements are true regarding NSX High Availability? (Choose two.)
A. NSX HA is configured as Active-Active.
B. NSX HA is configured as Active-Standby.
C. If an Active node fails, there is no service interruption during failover.
D. If an Active node fails, there is a 15 second service interruption during failover.
Where does the Distributed Logical Firewall enforce firewall rules?
A. At the Virtual Machine's virtual Network Interface Card (vNIC).
B. At the Logical Switch virtual port that the Virtual Machine connects to.
C. At the NSX Controller's firewall kernel module.
D. At the ESXi host vmnic used by the vSphere Distributed Switch.
A company has augmented its Data Center infrastructure by using vCloud Hybrid Service during peak hours. The company wants to extend their existing subnets into the cloud while workloads retain their existing IP addresses. The virtual machines in these subnets use an NSX Edge Gateway as their default gateway.
Which solution should this company use?
A. Layer 2 VPN
B. MPLS VPN
C. IPSec VPN
D. SSL VPN
A vSphere administrator wants to setup an NSX Edge Service Gateway to provide traveling employees secure access to company servers located in specific network segments within the corporate Data Centers. The solution has to be as scalable as possible.
Which Virtual Private Network solution will satisfy the administrator's requirements?
A. SSL VPN
B. MPLS VPN
C. Layer 2 VPN
D. IPSec VPN
Which statement is true regarding an NSX Edge gateway device configured with a DNS Server?
A. The NSX Edge will forward all DNS requests from virtual machines sent to it to the DNS Server.
B. The NSX Edge configuration will override the DNS Server configured by the NSX Manager.
C. The NSX Edge registers the DNS Server with the NSX Controller.
D. The NSX Edge periodically synchronizes its DNS tables with the primary DNS Server.
An NSX Edge Service Gateway has two interfaces: · Internal interface named Internal Access -- IP address = 10.10.10.1 -- Network mask = 255.255.255.0 · Uplink interface named Physical Uplink -- IP address = 20.20.20.1 -- Network mask = 255.255.255.0
A vSphere administrator wants to add a SNAT rule to allow traffic from the internal network segment to access external resources via the uplink interface.
Which three steps should the vSphere administrator do to add the SNAT rule? (Choose three)
A. Apply the SNAT rule to the Internal Access interface.
B. Select 10.10.10.1 as the translated source IP.
C. Apply the SNAT rule on the Physical Uplink interface.
D. Select 10.10.10.0/24 as the original subnet.
E. Choose 20.20.20.2 as the translated source IP.
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only VMware exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your VCPN610 exam preparations and VMware certification application, do not hesitate to visit our Vcedump.com to find your solutions here.