IBM IBM Certifications C9060-528 Questions & Answers

• Question 71:

  What are the steps to review the client logs for a particular node from the Operations Center using the client management services?

  A. On the Operations Center menu bar, click Clients. From the list of nodes obtained, double click the appropriate client node and select Diagnosis.

  B. On the Operations Center menu bar, click Diagnosis. Then look for the appropriate to review the logs.

  C. On the operations Center menu bar, click Diagnosis. Then click Clients and then double click the appropriate client node name.

  D. On the Operations Center menu bar, click Clients. Then select Diagnosis.

  Correct Answer: A

  You can access client log files from the Operations Center and get recommendations about how to solve

  client errors.

  To diagnose client errors, complete the following steps:

  1.

  On the Clients page of the Operations Center, select the client.

  2.

  Click Details.

  3.

  On the client Summary page, click the Diagnosis tab.

  References: https://demo.tsm.ibmserviceengage.com:11090/help/SSGSG7_OP_CNTR/ com.ibm.tsm.ui.doc/ic/t_client_errors_diagnose.html

• Question 72:

  To specify the node name for the NAS file server when processing NAS file systems, use the NASNODENAME option on the command line, or place in which file?

  A. Include/exclude list

  B. Server options file

  C. Client options file

  D. Backup copy group

  Correct Answer: C

  Use the nasnodename option to identify the NAS file server. Place the nasnodename option in your client system-options file (dsm.sys). The value in the client system-options file is the default, but this value can be overridden on the command line. If the nasnodename option is not specified in the client system-options file, you must specify this option on the command line when processing NAS file systems.

  References: https://www.ibm.com/support/knowledgecenter/en/SSEQVQ_8.1.0/client/ r_opt_nasnodename.html

• Question 73:

  How would an administrator restore data to a different node?

  A. use the filespace -newnode option

  B. use the GRANT ACCESS command to allow access to another node

  C. use the -fromnode option

  D. use the -tonode option

  Correct Answer: C

  Restoring or retrieving files from another client node

  If you are using commands, use the fromnode and fromowner options to indicate the node name and the

  name of the user who owns the files. For example, to restore files to one of your own file systems that were

  backed up from a workstation named Node1 and owned by a user named Ann, enter:

  dsmc restore -fromn=node1 -fromo=ann "/home/proj/*" /home/gillis/

  References: https://www.ibm.com/support/knowledgecenter/en/SSEQVQ_8.1.0/client/

  t_res_othernodeunx.html#t_res_othernodeunx

• Question 74:

  Which statement is true regarding the location of deduplication statistics information?

  A. QUERY ACTLOG shows the amount of space saved by server side deduplication.

  B. QUERY ACTLOG shows the total data reduction ratio.

  C. QUERY STGPOOL shows the total data reduction ratio.

  D. QUERY STGPOOL shows the total number of deduplicated files.

  Correct Answer: C

  QUERY STGPOOL (Query storage pools)

  Use this command to display information about one or more storage pools.

  The " QUERY STGPOOL" server command may not show the correct inline dedup and compression

  statistics for directory-container storage pools, erroneously reporting all these values as zero (percentage)

  like in the following example:

  Storage Pool Name: DIRCONTPOOL

  Storage Pool Type: Primary

  Storage Type: DIRECTORY

  .......

  Deduplication Savings: 0 (0%)

  Compression Savings: 0 (0%)

  Total Space Saved: 0 (0%)

  Incorrect Answers:

  A, B: QUERY ACTLOG (Query the activity log)

  Use this command to display messages generated by the server and client. This command provides

  filtering options that can be used to limit the number of messages displayed and the time that it takes to

  process this query. If you do not specify any parameters with this command, all messages generated in the

  previous hour are displayed.

  References: http://www-01.ibm.com/support/docview.wss?crawler=1anduid=swg1IT20115

• Question 75:

  What does the LANFREECOMMMETHOD option allows a client system to do?

  A. send data to a cloud-container storage pool

  B. send data to a NAS device

  C. send data directory to a SAN attached storage device without going through the storage agent

  D. send data through the storage agent to a SAN attached device

  Correct Answer: D

  To improve backup and restore performance, include lanfreecommmethod shardemem in the client options file if the storage agent and client are on the same system. Setting this option allows the IBM Spectrum Protect client and IBM Spectrum Protect storage agent to communicate by using RAM, instead of using TCP/IP.

  References: https://www.ibm.com/support/knowledgecenter/en/SSEQVQ_8.1.0/perf/c_perf_lanfree.html

• Question 76:

  How does an IBM Spectrum Protect administrator ensure that only the IBM Spectrum Protect server will start scheduled sessions with clients?

  A. SESSIONINITIATION PROMPTED

  B. SESSIONINITIATION CLIENTORSERVER

  C. SESSIONINITIATION SERVERONLY

  D. SESSIONINITIATION POLLING

  Correct Answer: C

  SESSIONINITiation controls whether the server or the client initiates sessions. The default is that the client initiates sessions.

  SERVEROnly specifies that the server does not accept client requests for sessions.

  References: IBM Spectrum Protect for Windows Version 8.1.0, Administrator's Reference, p 1090

• Question 77:

  How is data for a group of client nodes, a single client node, or a client filespace placed on as few volumes as possible?

  A. by enabling deduplication for the storage pool

  B. by enabling collocation for the storage pool

  C. by setting the migration delay period

  D. by creating a separate storage pool for the data

  Correct Answer: B

  A collocation group is a group of nodes or file spaces on a node whose data is collocated on a minimal number of sequential access volumes.

  References: https://www.ibm.com/support/knowledgecenter/en/SSGSG7_7.1.6/srv.reference/ r_cmd_collocgroup_define.html

• Question 78:

  What is the purpose of running the command PROTECT STGPOOL?

  A. add enhanced security on a directory-container storage pool

  B. encrypt the data in a copy storage pool

  C. store a copy of the directory-container data in another storage pool

  D. write protect tape volumes

  Correct Answer: C

  PROTECT STGPOOL protects a directory-container storage pool.

  Use this command to protect data in a directory-container storage pool by storing a copy of the data in

  another storage pool on a replication target server or on the same server by protecting the data to tape.

  References: IBM Spectrum Protect for Windows Version 8.1.0, Administrator's Reference, p 706

• Question 79:

  How does an administrator check on the status of completed node-replication processes?

  A. use QUERY REPLICATION command on the source server

  B. from the Replication tab in Operations Center

  C. use QUERY REPLICATION command on the target server

  D. use QUERY REPLSERVER command on either target or source server

  Correct Answer: A

  QUERY REPLICATION displays information about node replication processes. Issue this command on the server that acts as a source for replicated data.

  References: IBM Spectrum Protect for Windows Version 8.1.0, Administrator's Reference, p 937

• Question 80:

  Configure IBM Spectrum protect backup-archive client to use journal based backup. The configuration is written to which file?

  A. protect-journalbbd.ini

  B. spectrumprotect-journalbbd.ini

  C. journalbbd.ini

  D. tsmjbbd.ini

  Correct Answer: D

  On Windows, the journal service configuration file is called tsmjbbd.ini.

  References: http://www.tsmtutorials.com/2013/04/how-to-configure-journal-based-backup.html