1. Home
  2. Huawei
  3. H12-311

HCIA-WLAN V3.0

Exam Details

  • Exam Code
    :H12-311
  • Exam Name
    :HCIA-WLAN V3.0
  • Certification
    :Huawei Certifications
  • Vendor
    :Huawei
  • Total Questions
    :297 Q&As
  • Last Updated
    :Apr 16, 2025

Huawei Huawei Certifications H12-311 Questions & Answers

  • Question 151:

    If you want to create an open authentication security template, the following correct configuration is.

    A. AC-WLAN-view] security-profile name security-1 id 1 [AC-WLAN-sec-prof-security-1] open authentication-method open-system [AC-WLAN-sec-profsecurity-1] security-policy open [AC-WLAN-sec-prof-security-1] quit

    B. AC-WLAN-view] security-profile name security-1 id 1 [AC-WLAN-sec-prof-security-1] wep authentication-method open-system [AC-WLAN-sec-prof-security1] security-policy wep [AC-WLAN-sec-prof-security-1] quit

    C. AC-WLAN-view] security-profile name security-1 id 1 [AC-WLAN-sec-prof-security-1] wpa authentication-method open-system [AC-WLAN-sec-prof-security1] security-policy wpa

    [AC-WLAN-sec-prof-security-1] quit

    D. AC-WLAN-view] security-profile name security-1 id 1 [AC-WLAN-sec-prof-security-1] wpa2 authentication-method open-system [AC-WLAN-sec-profsecurity-1] security-policy wpa2 [AC-WLAN-sec-prof-security-1] quit

  • Question 152:

    If not configured, what is the default authentication method supported by the AP?

    A. mac-auth

    B. sn-auth

    C. no-auth

    D. mac-sn-auth

  • Question 153:

    According to the following configuration example, the following statement is correct. [AC] dhcp enable [AC] interface VLANif100 [AC-VLANif100] ip address 10.1.100.1 24 [AC-VLANif100] dhcp select interface [AC-VLANif100] quit

    A. The DHCP service is enabled by default in the global mode, so the dhcp enable can be configured.

    B. dhcp select interface command enables the DHCP client function on the interface of VLAN 100.

    C. If VLAN 100 is a user VLAN, the gateway is 10.1.100.1 and the mask is 255.255.255.0 after the user receives the address.

    D. If VLAN 100 is the management VLAN where the AP is located, the option 43 field in the DHCP message received by the AP should be 10.1.100.1.

  • Question 154:

    If PoE is enabled on the switch, you can no longer access legacy devices on these interfaces.

    A. True

    B. False

  • Question 155:

    Each AC device needs to specify the source IP address of the AC to establish a CAPWAP tunnel with the AP. One AC can specify up to two WLAN source IP addresses.

    A. True

    B. False

  • Question 156:

    What is the command to check the system version of the AP running?

    A. display ap all

    B. display ap-run-info id x (x is the ID number of the AP)

    C. display ap version id x (x is the ID number of the AP)

    D. display ap update all

  • Question 157:

    According to the following output, the following statement is correct (Select 2 Answers). display device AC6605-26-PWR's Device status: Slot Sub Type Online Power Register Status Role 0 - AC6605-26 Present PowerOn Registered Normal Master POWER Present PowerOn Registered Normal NA

    A. Currently the user is on the wired side of the AC.

    B. The user is currently on the wireless side of the AC.

    C. According to the output, the AC6605 adopts the POE power supply module.

    D. To achieve the relevant configuration of the WLAN, the user must first switch to the wireless side through CTRL+Y.

  • Question 158:

    For a wireless network with WPA2 PSK authentication and SSID broadcast, the user can double-click on the SSID and enter the correct username and password to access the network.

    A. True

    B. False

  • Question 159:

    Which of the following commands is to add GE 0/0/1 of Huawei access switch to VLAN 100?

    A. interface GigabitEthernet 0/0/1 Port link-type access Port default VLAN 100

    B. interface GigabitEthernet 0/0/1 Port link-type acess Port allow-pass VLAN 100

    C. interface GigabitEthernet 0/0/1 Port link-type trunk Trunk allow-pass VLAN 100

    D. interface GigabitEthernet 0/0/1 Port link-type trunk VLAN 100

  • Question 160:

    The following is true for WLAN networking configuration (Select 3 Answers).

    A. The user should try to ensure the detailed planning data when performing data planning, which will greatly facilitate the later configuration.

    B. Before the AP is configured, the AP must be online.

    C. Configure the WMM template to be directly bound to the antenna.

    D. WMM template is bound to the radio template.

Related Exams:

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Huawei exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your H12-311 exam preparations and Huawei certification application, do not hesitate to visit our Vcedump.com to find your solutions here.