Huawei Huawei Certifications H35-210 Questions & Answers

• Question 91:

  (single) According to the provisions of the H.248 protocol, what type of terminal does the telephone terminal occupy when it goes off-hook?

  A. Semi-permanent terminal

  B. Persistent terminal

  C. Permanent terminal

  D. Temporary terminal

  Correct Answer: A

• Question 92:

  (single) What are the fiber types connected to the MA5680T GPBD port?

  A. LC/PC

  B. FC/PC

  C. SC/PC

  D. LC/APC

  Correct Answer: C

• Question 93:

  (single) Is the following description correct? The FTTx device offline deployment solution is to generate offline device configuration data through network planning data. After the device is powered on, the configuration data is automatically delivered to achieve the plug-and-play function of the device.

  A. True

  B. False

  Correct Answer: A

• Question 94:

  (multiple) PVM packet voice processing board, management and control of the narrowband user board in the UA5000 chassis, which are the main functions?

  A. Implement V5 protocol and H.248/MGCP protocol processing

  B. Support for uplinking TDM voice signals to the switch through the V5 interface

  C. Support for packaging TDM voice into IP packets and uplink to softswitch devices

  D. Support for packaging TDM voice into ATM cell uplink to softswitch device

  Correct Answer: ABC

• Question 95:

  (single) The MA5600 main control board (SCU) is restarted repeatedly. What are the reasons for the impossible?

  A. Main control board host software problem

  B. The data configuration is incorrect.

  C. User ring network problem

  D. The main control board component is damaged.

  Correct Answer: B

• Question 96:

  (single) Is the following description correct? The MA5600T/MA5680T supports VLAN tag conversion. When an SVLAN with different attributes creates a service flow through the service-port, if the tag-transform is set to default, the Tag conversion rule is the same.

  A. True

  B. False

  Correct Answer: B

• Question 97:

  (single) Regarding the ADSL rate limit in the UA5000, which of the following statements is incorrect?

  A. ADSL rate limiting can use port rate limiting or PVC rate limiting.

  B. Set the UPC switch of the PVC to ON when the port speed limit is adopted.

  C. Set the PVC UPC switch to ON when the PVC speed limit is used.

  D. Port rate limiting is the traffic limiting by setting the maximum uplink and downlink rate when configuring the line profile.

  Correct Answer: B

• Question 98:

  (Single) The UA5000 narrowband main control board PVM and the broadband main control board IPM are connected to each other to provide voice services and broadband services. The voice service is transmitted to the IPM board through the internal IP channel, and then transmitted to the upper layer by the uplink interface of the IPM board. Network, which command should be used to configure the system networking mode?

  A. uplink tps on

  B. uplink tps off

  C. working mode integrated

  D. working mode alone

  Correct Answer: C

• Question 99:

  (single) Is the following description correct? The MA5600T SCUN provides one maintenance network port, one serial port, one environmental monitoring port, and eight GE interfaces.

  A. True

  B. False

  Correct Answer: B

• Question 100:

  (single) What kind of remote acceptance function does the MA5600T/MA5680T still support?

  A. FTP simulation test

  B. DHCP simulation test

  C. Voice call simulation test

  D. BTV simulation test

  Correct Answer: A