(multiple) In the FTTx access planning, what are the correct statements for the construction of OLT and OUN?
A. FTTB/C and FTTH can be mixed under the same OLT, but the PON ports used by FTTH and FTTB/C should be strictly separated.
B. The same MxU device cannot access both residential and enterprise users at the same time.
C. On the principle of ONU, the local power supply mode is adopted, and the remote power supply mode is not used as much as possible. In order to ensure the normal development of the voice service during the power outage, the battery can be configured as needed: priority is given to the guaranteed power supply system such as the elevator.
D. Under normal circumstances, the OLT needs to connect to the BSA through the aggregation switch.
(single) Is the following description correct? The link layer defines electrical and mechanical processes and functions to enable activation, maintenance, and removal of lines when systems are connected at both ends.
A. True
B. False
(single) Which of the following commands in the H.248 protocol can be sent by the MG or MGC?
A. Notify
B. ADD
C. MODIFY
D. ServiceChange
A total of 100 multicast users on the MA5600 are watching 20 multicast programs. Assuming that each multicast program occupies 2 Mbit/s of bandwidth, how many multicast traffic does the MA5600 uplink port currently have?
A. 50M bit/s
B. 90M bit/s
C. 200M bit/s
D. 100M bit/s
(single) Is the following description correct?
The MA5600 supports only IGMP-proxy and does not support IGMP-snooping.
A. True
B. False
(single) After the following types of DBA templates are bound to Tcont, when the remaining bandwidth of the PON port is viewed, the remaining bandwidth of the PAN port in the uplink direction is reduced.
A. fixed
B. Max
C. Non-assured
D. Best effort
(single) In the GPON network, which of the following statements is incorrect?
A. Each T-CONT consists of one or more GEM Ports, each carrying a traffic flow. A T-CONT can carry
data streams of one or more service types.
B. Each GEM Port is identified by a unique Port-ID. The range of the Port-ID is 0~4095, and is globally allocated by the OLT. That is, each ONU/ONT under the OLT cannot use the GEM with duplicate Port-ID. Port
C. The GEM port identifies the service virtual channel between the OLT and the ONU/ONT, that is, the channel that carries the service flow, similar to the VPI/VCI identifier in the ATM virtual connection.
D. Supports up to 32 ONUs/ONTs per GPON port
(multiple) signaling technology to ensure the smooth implementation of telephone calls, the currently widely accepted VOIP control signaling system includes?
A. H.323 series
B. MGCP
C. H.248/Megaco
D. SIP
(multiple) What are the possible positioning methods when the "echo" fault occurs in the VoIP PSTN telephony service?
A. Check if the acoustic echo is caused by the terminal phone.
B. Check if the PSTN port transmit gain is set too large.
C. Check if the DSP chip input gain (PCM->IP) is set too large.
D. Check if the EC switch (echo suppression switch) of the peer device is turned on during the call.
(single) Which device maintenance method does the MA5600T/MA5680T currently support?
A. Serial port
B. TELNET
C. SNMP
D. WEB
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Huawei exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your H35-211 exam preparations and Huawei certification application, do not hesitate to visit our Vcedump.com to find your solutions here.