A customer tells you that they can only afford up to 4 hours without access to data and up to 12 hours worth of data loss.
What are customer's RPO and RTO objectives?
A. 12 hours RPO and 4 Hours RTO
B. 12 Hours RPO and 12 hours RTO
C. 4 Hours RTO and 4 hours RPO
D. 12 hours RTO and 4 Hours RPO
Which component in an HPE Simplivity 380 solution processes all I/O requests and manages the compute-intensive tasks of deduplication and compression?
A. HPE SmartArray P408i-a SR Gen10 Controller
B. HPE OmniStack Virtual Controller
C. HPE SN1100Q 16Gb 2p FC HBA
D. HPE OmniStack Accelerator Card
What is the difference between RAID 1 and RAID 1+0?
A. RAID 1+0 is a stripe set spanning mirrored drives and RAID 1 is a mirror
B. RAID 1+0 requires at least two disks and RAID 1 requires at least four
C. RAID 1+0 is more storage efficient than RAID 1 as more than 50% of total disk space is available for data storage
D. RAID 1+0 can sustain the failure of any number of drives in a set while RAID 1 can sustain one drive failure
What is a key benefit of NVMe? (Choose two.)
A. can issue and service thousands of disk read or write commands in parallel
B. enables the use of direct attached storage instead of complicated Fibre Channel fabrics
C. makes managing the storage much simpler
D. delivers greatly reduced latency
E. allows administrators to leverage faster SCSi protocols
Which technology maximizes the available capacity for disk-based backups?
A. snapshots
B. deduplication
C. tiering
D. wide striping
Which user interface must be used to create new storage volumes on HPE MSA storage systems?
A. HPE Centralized Management Console
B. HPE OneView Global Dashboard
C. HPE Storage Management Utility
D. HPE Pool Manager
When designing a SAN fabric topology, which parameters will influence data availability? (Choose two.)
A. ISL trunking
B. power supply wattage
C. number of switches
D. SFP speed
E. buffer credits
customer uses several StoreEasy 1000 systems successfully. They recently added a StoreEasy model 3000 for more capacity. They cannot find the HPE Pool Manager on the newly installed system.
What is the most likely issue causing the customer to have trouble locating the HPE Pool Manager?
A. HPE Pool Manager is only available on StoreEasy 1000 systems.
B. HPE Pool Manager requires a separate license.
C. The customer needs to order the Federation license to manage multiple StoreEasy systems.
D. The customer needs to update the StoreEasy 3000 system to the latest version.
A customer has replaced their old 4Gb SAN switches in two on-premise datacenters. The new 32Gb SAN switches with SW optics fail to establish connectivity with port speed set to 32Gb.
What could cause this connectivity issue at a specified speed?
A. The port butter credits are set to a lower speed.
B. The length and type of multi-mode fiber between data centers.
C. The ISL links need to be configured with LW optics.
D. The lack of Fabric license on the switch.
Which characteristics must you consider to properly size a Nimble AF3000 solution? (Choose two.)
A. RAID level
B. CPG raid set
C. triple parity
D. hot spare drives E. deduplication and compression
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only HP exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your HPE0-J55 exam preparations and HP certification application, do not hesitate to visit our Vcedump.com to find your solutions here.