HP HP Certifications HPE0-V14 Questions & Answers

• Question 141:

  A customer wants to optimize the performance or its storage array by moving data residing in one class or disks to a more appropriate class of disks based on data access patterns without manual intervention. Which HPE storage techno logy/feature will meet the customer requirement when the data is stored on an HPE 3PAR storage?

  A. Configure Adaptive Optimization with a minimum of 2 CPG's

  B. Use Wide striping on the Storage Pool level

  C. Activate SSD read cache on volume level

  D. Enable Automated Tiering on the Storage Pool level

  Correct Answer: D

• Question 142:

  A customer needs to consolidate software, hardware, and backup in a single integrated solution to reduce the cost and complexity of their IT environment Which solution meets the customer needs?

  A. HPE StoreEasy

  B. HPE StoreOnce

  C. HPE Apollo Server

  D. HPE SimpliVity

  Correct Answer: D

• Question 143:

  A customer needs a video archive repository initially starting at 30TB internal storage. The repository is expected to grow at 20% annually and should have a lifespan of 3 years. Which HPE ProLiant server solution meets the customer's requirements?

  A. HPE ProLiant DL560 Gen10 with LFF SAS drives

  B. HPE ProLiant DL380 Gen10 with LFF SAS drives

  C. HPE ProLiant ML110 with SFF SAS drives

  D. HPE ProLiant DL560 Gen9 with SFF SAS drives

  Correct Answer: B

• Question 144:

  A customer has a single HPE ProLiant Gen 10 server.

  Which embedded management tool should they use to monitor the server?

  A. HPE OneView Standard

  B. HPE Smart Update Manager

  C. NPE Intelligent Provisioning

  D. HPE iLO5

  Correct Answer: B

  Reference: https://dustinweb.azureedge.net/media/483889/proliant-dl380-gen10-smb.pdf

• Question 145:

  A customer just purchased a ProLiant 300 series Gen10 server and wants to install the latest version of Windows. Which feature of this server will assist the customer with the initial Windows installation?

  A. HPE SSA Diagnostics

  B. HPE SmartStart

  C. Smart Storage Administrator

  D. Intelligent Provisioning

  Correct Answer: D

  Reference: https://community.hpe.com/t5/Alliances/Get-HPE-Gen10-Servers-with-Windows-Server-2019-up-and-Running-in/ba-p/7066128#.XnxeVG5RWQ4

• Question 146:

  A customer Has a data center with third-party routers and firewalls You are designing a new data center network switch architecture consisting of FlexFabric switching for the data network and ArubaOS-Switch switching for the out-of-band

  management network.

  The customer needs a network management platform with the capabilities to manage and monitor the entire environment

  Which management platform meets the customer requirements?

  A. Aruba Central

  B. HPE OneView

  C. HPE IMC

  D. Aruba Airwave

  Correct Answer: C

• Question 147:

  A customer needs to verify inbound packet statistics for interface Ten-GigabitEthernet 1/0/10 on an HPE FlexFabric 5900 series switch used by an iSCSI storage array. Which command can be used in the CLI to perform this operation?

  A. show inbound counters port 1/0/10

  B. display counters inbound interface Ten-GigabitEthernet 1/0/10

  C. display all statistics from port 1/0/10

  D. interface Ten-GigabitEthernet 1/0/10 show counters

  Correct Answer: B

  https://techhub.hpe.com/eginfolib/networking/docs/switches/5950/5200-4013a_l2-lan_cr/content/504039110.htm

• Question 148:

  A customer is subject to regulatory requirements and their data is highly sensitive.

  Which HPE Smart Array feature addresses their need for an level of security for data stored inside their server?

  A. Secure Encryption

  B. SmartCache

  C. Smart Battery backed-up write-cache

  D. Rapid Parity Initialization

  Correct Answer: A

• Question 149:

  A customer is facing high and unpredictable latency on an HPE ProLiant DL380 Gen10 server equipped with P408i-a controller Which tool can display an Array Diagnostic Report?

  A. Smart Storage Administrator

  B. HPE OneView

  C. UEFl Embedded Diagnostics

  D. HPE InfoSight

  Correct Answer: A

• Question 150:

  A customer requests a quote for an HPE storage solution that meets these requirements

  1.

  fully redundant dual-controller storage array with no single points of failure

  2.

  1 Gb or 10 Gb ISCSI connectivity

  3.

  at least four host-facing ISCSI ports

  4.

  capable of expanding usable capacity in small increments of one-to-two disks Which HPE storage solution should be proposed?

  A. D3000

  B. MSA 1050

  C. Nimble AF20Q

  D. Nimble HF20

  Correct Answer: B