HP HP Certifications HPE0-V14 Questions & Answers

• Question 51:

  Which feature in a block storage array is effective in decreasing the size of blocks?

  A. thin provisioning

  B. thick provisioning

  C. compression

  D. deduplication

  Correct Answer: C

• Question 52:

  You are reviewing a series of MSA2052 storage designs for a customer's remote locations.

  Their largest remote site requires the highest possible level of internal data protection with at least 20 TB of storage. Which disk drive design is adequate for this site?

  A. 14 HPE MSA 2 TB drives, configured with RAID1

  B. 8 HPE MSA 2 TB drives, configured with RAID5

  C. 10 HPE MSA 2 TB drives, configured with RAID0

  D. 12 HPE MSA 2 TB drives, configured with RAID6

  Correct Answer: D

  Reference: https://h20195.www2.hpe.com/V2/getpdf.aspx/a00008277enw.pdf

• Question 53:

  A customer wants to install an HPE Proliant server that has a single dual port 10Gb NIC.

  Which NIC feature should you introduce to allow each 10Gb port to be seen as four individual adapters in the operating system?

  A. NPAR

  B. RoCE

  C. FCoE

  D. RDMA

  Correct Answer: A

  Reference: https://h20195.www2.hpe.com/V2/getpdf.aspx/c04312719.pdf?ver=12

• Question 54:

  You have configured a port on an HPE FlexFabric 5900 series switch that is connected to a VMware ESXi server to support multiple VLANs.

  

  Given the configuration above, what should happen to any of the untagged traffic coming from the VMware ESXi host?

  A. The untagged traffic with be dropped.

  B. The untagged traffic will be transmitted in vlan 2.

  C. The untagged traffic will be transmitted in vlan 50.

  D. The untagged traffic will be transmit.ted in vlan 1.

  Correct Answer: C

• Question 55:

  You are installing an HPE Nimble HF20 into a customer's existing rack.

  Prior to installation, what should you consider?

  A. An HPE Nimble array has left-to-right airflow

  B. HPE recommends installing the HPE Nimble array at the top of the rack

  C. The HPE Nimble array will require 3-phase power

  D. HPE recommends racks with a depth of 1200 mm

  Correct Answer: D

  Reference: https://h20195.www2.hpe.com/v2/GetPDF.aspx/a00008274enw.pdf

• Question 56:

  In which layer of the OSI model would you find an IP address?

  A. Application

  B. Network

  C. Physical

  D. Data link

  Correct Answer: B

• Question 57:

  A customer is considering an upgrade of their network, which connects 10 servers. The customer has a converged data center networking architecture with Layer 2 and Layer 3 functionality. Which HPE product family will meet this customer's needs?

  A. Arista

  B. Altoline

  C. Aruba

  D. FlexFabric

  Correct Answer: D

• Question 58:

  A customer needs to reconfigure their data center network because their network often becomes congested, and the customer cannot monitor the network.

  How should the customer configure their network?

  A. Isolate the management network from production traffic

  B. Isolate the SAN on a public network and use a virtual private network (VPN) for secure data

  C. Configure IRF on the switches

  D. Configure in-band management to manage the switches through gigabit Ethernet ports

  Correct Answer: A

• Question 59:

  You need to update the firmware on an MSL2024.

  Which HPE utility do you need to use?

  A. Smart Storage Administrator

  B. OneView Standard

  C. Central Management Console

  D. Library and Tape Tools

  Correct Answer: D

• Question 60:

  You have completed a non-disruptive activation of firmware on an SN6000 switch.

  Which session must be restarted manually?

  A. Enterprise Fabric Management Suite session

  B. telnet session

  C. SAN connection Manager session

  D. QuickTools session

  Correct Answer: B