A network architect is designing a Wi-Fi solution for a customer using Aruba Central's VisualRF tool When creating a Campus view, how would the network architect pull in a map that displayed the campus location in a city?
A. Import the longitude and latitude information from any web-based map site
B. Import the longitude and latitude information from Google Maps
C. Create a screen capture from any web-based map site and import the picture file
D. Use VisualRF's built-in map tool and define the appropriate longitude and latitude information
A company has chosen an Aruba mobility controller solution for the redesign of their wireless network The design will have two 7205 controllers in a cluster for campus employees and a single VMC-50 virtual controller for remote access via a
DMZ. A Mobility Master (MM) is used for centralized license and controller management. All controllers will minimally run ArubaOS 8 4 or later Currently the company has 1.000 employees. There are 30 branch offices that will use RAPs to
connect to the DMZ controller. A peak of 100 users concurrently using the VIA client will also connect to the DMZ controller.
How many Aruba LIC-VIA licenses does the company need to purchase for this solution?
A. 100
B. 1
C. 1,030
D. 130
A company has hired a network architect to replace an existing legacy wireless and wired network The building is one-story and contains four wiring closets Based on the information the network architect gathered from the company, one 48port POE+ switch and three 48-port non-POE+ switches will be placed in each wiring closet. One stacking domain should be created for each wiring closet that supports 40 Gbps uplinks.
Which stacking solution should the architect implement for the floor that meets the requirements and is the most cost-effective'?
A. VSX
B. VSF
C. Backplane stacking
D. Distributed trunking
Which component uniquely defines the BSSID when implementing an employee SSID?
A. Case-sensitive SSID name
B. Radio MAC address
C. Wireless device MAC address
D. Case-insensitive SSID name
A network architect is doing a site survey for a new wireless design One concern the company has with the old wireless network is coverage. In some cases, APs would lose power and some employees in the network would lose wireless connectivity. The new design needs to prevent this issue from occurring. During the site survey, what are best practices to be followed in regards to the dBm signal level and the power of the AP to ensure adequate wireless coverage and minimal overlap of AP signals for the new design?
A. AP power at 75% and a measurement of -90 dBM on the measuring device
B. AP power at 100% and a measurement of -65 dBM on the measuring device
C. AP power at 75% and a measurement of -80 dBM on the measuring device
D. AP power at 50% and a measurement of -65 dBM on the measuring device
A customer is designing a new wired network. The customer requires 50 Gbps uplinks, VSF logical switching, and smart rate port support.
Which of the following switches would meet these requirements?
A. 3810M series
B. 6300 series
C. 5400R series
D. 8300 series
Which feature does the Aruba AP 387 support?
A. 802.11 ax
B. Indoor usage
C. included external directional antennas
D. 60GHZRF
A customer has over 100 access layer switches. The customer requires user authentication done via the Aruba Dynamic Segmentation feature. What components are required to implement this solution? (Select two.)
A. enterpnse authentication server
B. Aruba APs
C. Aruba mobility controller
D. AirWave server
E. Active Directory server
A network architect is designing a new wireless solution for a company The company needs seamless roaming and client and AP active load balancing. The company also requires an Aruba Mobility Master (MM) to manage the wireless infrastructure. Which Aruba feature does the architect need to include in the design?
A. Clustering
B. AirMatch
C. Client Match D. IAP VC
A network architect is designing a new wired and wireless solution for for a company. The company has two buildings on a campus, which each building has three floors. The campus core will be placed in the basement of Building 1. Each wiring closet has eight strands of multi-mode OM3 grade fiber that connect to a wiring closet of the first floor of the building it is contained, referred to as a main distribution frame (MDF). The maximum distance between a floor's wiring closet and the MDF is 100 feet (30 meters). The maximum distance between the two MDFs and the campus core is no more than 150 feet (45 meters). There are eight strands of multi-mode OM3 grade fiber from these two MDF closets to the campus core. Based on this information, which type of design should be used and what is the maximum speeds supported all uplinks for the existing the multi-mode fiber?
A. three-tier and 10 Gbps
B. three-tier and 40 Gbps
C. two-tier and 10 Gbps
D. two-tier and 40 Gbps
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only HP exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your HPE6-A66 exam preparations and HP certification application, do not hesitate to visit our Vcedump.com to find your solutions here.