1. Home
  2. Juniper
  3. JN0-363

Service Provider Routing and Switching, Specialist (JNCIS-SP)

Exam Details

  • Exam Code
    :JN0-363
  • Exam Name
    :Service Provider Routing and Switching, Specialist (JNCIS-SP)
  • Certification
    :Juniper Certifications
  • Vendor
    :Juniper
  • Total Questions
    :82 Q&As
  • Last Updated
    :Mar 27, 2025

Juniper Juniper Certifications JN0-363 Questions & Answers

  • Question 41:

    Which two statements are correct about IS-IS? (Choose two.)

    A. A level 1 only router can never form an adjacency with a level 2 only router.

    B. For level 2 adjacencies, the area IDs can be different.

    C. For level 2 adjacencies, the area IDs must be the same.

    D. A level 1 only router can form an adjacency with a level 2 only router.

  • Question 42:

    Interface ge-0/0/0.0 connecls yout network to your ISP. You want to advertise this interface address as an Internal route In OSPF without creating a neighbor with your ISP. In this scenario, how is this task accomplished?

    A. Remove interface ge-0/0/0.0 from OSPF.

    B. Create a generated route for Interface ge-0/0/0.0.

    C. Add ge-0/0/0.0 as a passive interface In OSPF.

    D. Configure a static route for Interface ge-0/0/0.0.

  • Question 43:

    Exhibit

    You want the R1 and R3 routers to forward traffic destined to the 203.0.113.0/24 network through R2. Which BGP attribute would you modify to satisfy this requirement?

    A. community

    B. origin

    C. MED

    D. local preference

  • Question 44:

    An OSPF router does not have a router ID configured.

    In this scenario, which statement is correct about the router ID?

    A. The Junos OS will use the IP address assigned to the interface with the lowest MAC address.

    B. A router ID will not be assigned until it is manually configured.

    C. The Junos OS will use the IP address assigned to the loopback interface for the router ID.

    D. The Junos OS will use the IP address assigned to the Interface with the highest priority.

  • Question 45:

    Exhibit

    Referring to the exhibit, internal BGP between R1 and R2 is not establishing. What is the problem In this scenario?

    A. R1 does not have a route to 192.168.200.2.

    B. R1 and R2 must each have unique AS numbers.

    C. R1 needs to be configured with an explicit router ID.

    D. R1 needs to be configured with a next-hop self policy.

  • Question 46:

    Exhibit

    You confirm that the R2 and R3 routers are receiving a BGP route to the 203.0.113.0/24 network, but both routers display the route as hidden. Referring to the exhibit, which two actions solve this problem? (Choose two.)

    A. Apply the routing policy on R1 as an import policy to the IBGP group.

    B. Configure a routing policy on R1 that sets the next hop for the 203 0.113.0/24 BGP route to the IP address that R1 uses for IBGP peering.

    C. Configure a routing policy on R1 that sets the next hop for the 203.0.113.0/24 BGP route to the IP address that R1 uses for EBGP peering.

    D. Apply the routing policy on R1 as an export policy to the IBGP group.

  • Question 47:

    Exhibit

    The exhibit shows a topology with 1 Gbps interfaces between routers, and four RSVP LSPs operating with the respective bandwidth reservations.

    Which path will be selected for a new LSP from R4 to R6 with a bandwidth reservation of 400 Mbps?

    A. R4 -> R1 -> R2 -> R5 -> R6

    B. R4 -> R5 -> R6

    C. R4 -> R5 -> R2 -> R3 -> R6

    D. R4 -> R1 -> R2 -> R3 -> R6

  • Question 48:

    Referring to the exhibit, which statement is correct?

    A. R1 will advertise only the 10.200.2.0/24 prefix to the 192.168.1.5 neighbor.

    B. R1 will advertise only the 10.200.3.0/24 prefix to the 192.168.1.5 neighbor.

    C. R1 will advertise the 10.200.1.0/24, 10.200.2.0/24, and 10.200.3.0/24 prefixes to the 192.168.1.5 neighbor.

    D. R1 will advertise only the 10.200.1.0/24 prefix to the 192.168.1.5 neighbor.

  • Question 49:

    Exhibit

    You are asked to configure OSPF between routers R1 and R2 using IPv6 addresses. Which two tasks will accomplish your objective? (Choose two.)

    A. Issue the sec protocols ospf area 0.0.0.0 interface ge-0/0/1.0 command.

    B. Under the [edit routing-options] hierarchy, configure a 32-bit router ID.

    C. issue the set protocols ospf3 area 0.0.0.0 interface ge-0/0/1.0 command.

    D. Under the [edit routing-options] hierarchy, configure a 128-bit router ID.

  • Question 50:

    Exhibit You are asked to assign interface xe-1/0/5 to a virtual switch.

    What must be accomplished to complete the configuration?

    A. Interface xe-1/0/5 must be added to routing-instance sw-1 vlan_2.

    B. Interface xe-1/0'5 must be a trunk port.

    C. Interface xe-1/0/5 must be added to routing-instance sw-1.

    D. An IRB interface must be configured to routing-instance sw-1 vlan_2.

Related Exams:

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Juniper exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your JN0-363 exam preparations and Juniper certification application, do not hesitate to visit our Vcedump.com to find your solutions here.