When cabling a rack, which of the following is BEST practice?
A. Use rack specific cabling hardware
B. Let cables hang loosely behind the servers
C. Channel all power cables down the sides, and all network cables down the center
D. Keep cables close to the front of the rack for better access
A technician has found that the uninterruptible power supply (UPS) connected to a server does not have sufficient battery power to allow the server to shutdown gracefully. Which of the following is the MOST cost effective way to allow this server to shutdown gracefully?
A. Install a second UPS.
B. Increase the size of the swapfile.
C. Increase the size of the pagefile.
D. Install an extended battery pack into the UPS.
A technician is responsible for overseeing twelve remote offices. There was a report of a power outage at one of the remote offices the night before, and now one of the servers there has not rebooted even though it was shut down gracefully. The technician was forced to travel two hours just to turn the server on. Which of the following is the MOST cost effective way to prevent future travel?
A. Install a generator onsite.
B. Install a remote management card in the server.
C. Install an uninterruptible power supply (UPS) onsite.
D. Move the server to the main office.
When installing external SCSI devices, terminators are required on: (Select TWO)
A. the SCSI adapter.
B. each device.
C. the first device.
D. the last device.
E. the servers parallel port.
A company has recently upgraded all backup hardware and media from DLT IV to LTO3 tapes and tape drives. Several weeks after the upgrade, the development team discovers a corruption in one of the application servers and must restore
from one of the DLT IV tapes.
Which of the following steps are necessary for the server administrator to use these tapes?
A. Reformat the DLT IV tape in LTO3 format. Load the tape.
B. Install the DLT IV driver on the LTO3 drive. Load the tape.
C. Load the DLT IV tape into the LTO3 drive.
D. Replace the LTO3 drive with a DLT IV tape drive. Load the tape.
An administrator is upgrading the backup server from a single tape drive to a SCSI tape library.
The library has been unpackaged, mounted, and the library drivers installed. Which of the following items should the administrator have to connect the device to the backup server?
A. SCSI cable
B. SCSI interface adapter on the tape library
C. SCSI termination card on the server
D. iSCSI cable
Which of the following offers the highest level of redundancy in the design of a storage system?
A. A Dual Port HBA with a pair of Point-To-Point connections to the SAN.
B. Two Single Port HBAs connected to a fiber switch.
C. A Dual Port HBA with a Point-To-Point connection to a SAN.
D. Two Dual Port HBAs connected to a pair of fiber switches.
Which of the following backup methods should be used nightly to ensure backups capture all necessary data in the LEAST amount of time?
A. Daily
B. Incremental
C. Normal
D. Differential
Which of the following is a standard IEEE 1394 transmission speed?
A. 100Mbps
B. 400Mbps
C. 480Mbps
D. 1000Mbps
For a technician to test network connectivity to a remote host on a Unix Server which of the following commands should they run?
A. IPCONFIG
B. PING
C. ARP
D. IFCONFIG
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only CompTIA exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your SK0-004 exam preparations and CompTIA certification application, do not hesitate to visit our Vcedump.com to find your solutions here.