A technician has been asked to install a printer on a Windows 7 machine. Through which of the following Control Panel utilities will the technician install the printer?
A. Printers and Devices
B. Printers
C. Devices and Printers
D. Printers and Faxes
A technician has been asked to share a laser printer amongst the users in an HR workgroup. The printer will need to be accessed from distances up to 200 feet through no more than one to two, hollow, dry board walls. Which of the following methods should be used?
A. 802.11x
B. PAN
C. USB
D. Infrared (IR)
A technician has been asked to identify the unknown network addresses from a series of printers attached to the network via external hardware printer servers. Which of the following will provide the technician with the necessary information?
A. Performing a device self test print page from each printer
B. Performing a device print page from each print server
C. Performing a device factory reset on each print server
D. Performing a PING of each device address without the FQDN
A customer wants to be able to archive a large 15 to 20 GB project to optical media using a single disk. Which of the following should a technician recommend?
A. Blu-Ray writer
B. DVD-RW drive
C. Dual Layer DVD burner
D. CD-ROM burner
Which of the following wireless standards operates at 5GHz? (Select TWO).
A. 802.11a
B. 802.11b
C. 802.11bg
D. 802.11g
E. 802.11n
A technician is preparing to perform a processor upgrade on a critical company server. Which of the following precautions should be taken FIRST before performing such work on a system? (Select TWO).
A. Discharge all capacitors inside the PSU
B. Remove all jewelry
C. Ensure the PSU is plugged into a grounded electrical socket
D. Ensure humidity levels within the room are lowered
E. Put on an anti-static wrist strap
Which of the following supports a MAXIMUM frequency of 100MHz?
A. Cat5
B. Cat5e
C. Cat6
D. Cat6a
A brand new datacenter has been wired with all CAT6a wiring. A technician has been tasked to immediately install and boot up an already configured mission critical file server. Prior to turning the server on, the technician realizes that they had brought CAT5e patch cords by mistake. Which of the following should the technician do?
A. Install the CAT5e cable, boot the server and then return and replace it later.
B. Inform the customer and recommend temporarily using the CAT5e cable.
C. Install the CAT5e cable, document the installation and leave the premises.
D. Inform the customer that the server will be available as soon as a CAT6a cable is acquired.
A user has 6,250 Megabytes worth of pictures they would like to back up. At the very MINIMUM, which of the following could backup these pictures to a single medium?
A. DL DVD Burner
B. LTO Drive
C. CD Burner
D. Blu-Ray Burner
When referring to laser printing, which of the following describes the development process?
A. The corona wire places a static charge on the drum.
B. Toner is pulled to the charged areas of the drum.
C. Toner is pulled from the drum to the paper.
D. The toner is permanently affixed to the paper.
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only CompTIA exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 220-801 exam preparations and CompTIA certification application, do not hesitate to visit our Vcedump.com to find your solutions here.