A network engineer is configuring a Cisco AireOS 8.2 WLC, Cisco MSE, and Cisco PI with Cisco 3700 Series APs and Cisco Hyperlocation modules. The engineer configures and enables a WLAN with Hyperlocation. During testing, the engineer notices that location accuracy is poor. Which action resolves the issue?
A. Enable DCA in the Global Configuration settings of the WLC.
B. Install WLC software that supports the Hyperlocation module.
C. Use the same NTP server for syncing the time on the WLC, MSE, and PI.
D. Open SNMP port 161 and NMSP port 16113 on the controller.
An administrator is querying the Cisco CMX server through REST API for active client data to build an application. Cisco CMX supports the use of version 3 of REST API to query for active clients in the network. While testing to retrieve information using the API, no results are received. Which configuration is required for authentication against the API?
A. cmxos v3 apiserver user add
B. cmxos apiserver user add
C. cmxctl apiserver user add
D. cmxctl v3 apiserver user add
An engineer manages the wireless network for a government agency. The wireless network is used for access to the corporate network. The wireless network must include the latest wIPS/wIDS detection definitions. Which action does the engineer take to ensure that this requirement is met?
A. Update the Cisco MSE software.
B. Configure Cisco Prime Infrastructure to push new definitions to the APs.
C. Update the Cisco WLC software.
D. Configure the Cisco WLC to repoll the Cisco MSE for update definitions.
An engineer is setting up web authentication for the public Wi-Fi. The installation will take place in a retail store. The existing Facebook page to log in to the captive portal must be used. The engineer already paired the Cisco MSE to the Facebook page. Which two actions complete the configuration? (Choose two.)
A. Configure access control lists.
B. Pair Cisco MSE to Cisco Prime Infrastructure.
C. Configure the client for authentication.
D. Configure Cisco MSE to allow mobile authentication.
E. Configure WLAN for authentication.
As part of a PCI audit, an engineer is gathering information on a Cisco Unified Wireless Network environment. The report must include any security weaknesses in the system. Where does the engineer find the related information?
A. security team network scan results from last year
B. Security tab on Cisco wireless LAN controllers
C. security interference results on Cisco Prime Infrastructure
D. security index results on Cisco Prime Infrastructure
More people are working from home, so an engineer must configure OEAPs to support the users. The security team already configured NAT with a public IP address that points to the internal WLC IP address. The APs also have been configured with the public WLC IP address, but APs cannot join the controller yet. Which action resolves this issue?
A. Configure the internal WLC IP address on the OEAPs.
B. Create an ACL in WLC to accept the OEAPs.
C. Enable NAT on the WLC to configure the public IP address.
D. Configure the public WLC IP address on the home router.
A network engineer must configure APs on a controller for 802.1x access to a wired infrastructure as quickly as possible. The same credentials are used for all APs. Where are the credentials entered?
A. Management > Local Management Users
B. Security > Advanced EAP
C. AP > Credentials tab
D. Wireless > Global Configuration
An engineer must send Cisco OEAPs to the homes of employees. The APs must be able to discover and join the WLC when they connect to each employee home network. Which action accomplishes this task?
A. Use the WLC name and management IP address to configure the OEAPs.
B. Use the OEAP management IP address to listen for discovery broadcasts from the WLC.
C. Use the WLC name and management IP address to configure the DNS server.
D. Use DHCP Option 43 to configure the WLAN name and management IP address.
A network engineer performed a new deployment of Cisco DNA Center. The engineer discovered and provisioned all APs and converted them to fabric. The SSIDs were created, and the APs were allocated to the respective floors, but the SSIDs are not being seen on the floors. What must be configured to establish this connectivity?
A. Map the pools to the SSIDs.
B. Configure RADIUS for the SSIDs.
C. Enable all radios on the APs.
D. Add the users in Cisco ISE.
An engineer manages a wireless network for an enterprise. The offices of the enterprise are in a multistory building with other companies. To avoid service loss of the wireless network, jamming devices must be monitored and an alert must be raised when one enters the airspace. Which two parameters must be configured for this alarm to happen? (Choose two.)
A. Jammer is in the "Rogue Devices to Detect" multiple select box.
B. Jammer is selected in the Rogue Policies.
C. Clean Air is enabled.
D. Air Quality Index Trap is enabled.
E. Set the Cisco WLC to trap this type of device.
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Cisco exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 300-430 exam preparations and Cisco certification application, do not hesitate to visit our Vcedump.com to find your solutions here.