Cisco CCNP Collaboration 300-815 Questions & Answers

• Question 91:

  The Cisco UCM Dialed Number Analyzer allows analysis of calls from which two devices? (Choose two.)

  A. translation patterns

  B. device pools

  C. CTI ports

  D. CTI route points

  E. IP phones

  Correct Answer: CE

  Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/dna/11_5_1/CUCM_BK_CBA47A6E_00_cucm-dna-guide-115/CUCM_BK_CBA47A6E_00_cucm-dna-guide-115_chapter_01.html#CUCM_TP_A5DA99E0_00

• Question 92:

  Refer to the exhibit.

  

  An administrator is troubleshooting a situation where a call placed from a phone registered to Cisco UCM does not complete. The administrator wants to use the Dialed Number Analyzer on Cisco UCM to check which translation pattern the call is matching. However, when logging in to Cisco Unified Serviceability, there is no option for Dialed Number Analyzer under the tool menu. Which two steps should be taken to resolve this issue? (Choose two.)

  A. Restart the subscriber.

  B. Activate the Cisco Extended Functions service.

  C. Activate the Cisco CallManager service.

  D. Activate the Cisco Dialed Number Analyzer service.

  E. Activate the Cisco Dialed Number Analyzer Server service.

  Correct Answer: DE

• Question 93:

  Refer to the exhibit.

  

  Users report that when they dial the emergency number 9911 from any internal phone, it takes a long time to connect with the emergency operator. Which action resolves this issue?

  A. Adjust the service parameter T302 timer to the desired value.

  B. Adjust the service parameter T204 timer to the desired value.

  C. Check the Urgent Priority check box under 9.911 pattern.

  D. Point the emergency pattern directly to the PSTN gateway.

  Correct Answer: C

• Question 94:

  Which configuration must an administrator perform to display Translation Pattern operations in Cisco UCM SDL traces?

  A. Enable the Detailed Call Analysis option under Enterprise Parameters for Cisco UCM.

  B. Set up the Digit Analysis Complexity in Service Parameters for Cisco UCM to TranslationAndAlternatePatternAnalysis.

  C. Check the Translation Patterns Analysis check box in Micro Traces on the Cisco UCM Serviceability page.

  D. By default, the Translation Patterns operations are printed in SDL traces, so no additional configuration is necessary.

  Correct Answer: B

  There is a bug CSCvb32314 in CUCM. Symptom:

  Translation patterns are not present in cucm SDL traces even parameter "Digit Analysis Complexity" under Service parameters -> Call Manager -> Advanced is set to "TranslationAndAlernatePatternAnalysis". This is causing troubleshooting

  of HCS looping dial plan issues (or complex dialplan issues) difficult as translation patterns applied before reaching endpoint are not visible.

  Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/hcs/12_5/HCS_Solution/Troubleshooting/chcs_b_troubleshooting-guide/chcs_m_troubleshooting-voice-application-components.html?dtid=osscdc000283

• Question 95:

  In Cisco UCM, which tool is used to check SIP traces?

  A. MTP

  B. CCSIP

  C. RTMT

  D. OS Administration Page

  Correct Answer: C

• Question 96:

  If all patterns below are configured in Cisco Unified Communications Manager which would be used when dialing the pattern "123"?

  A. 12!

  B. 12X (urgent priority set)

  C. 1XX (urgent Priority Set)

  D. 12[2-5]

  Correct Answer: D

• Question 97:

  An engineer must configure a secure SIP trunk with a remote provider, with a specific requirement to use port 5065 for inbound and outbound traffic. Which two items must be configured to complete this configuration? (Choose two.)

  A. Incoming Port in SIP Information section of the SIP Trunk configuration.

  B. Incoming Port in Security Information of the SIP Profile configuration.

  C. Destination Port in SIP Information section of the SIP Trunk configuration

  D. Incoming Port in SIP Trunk Security Profile configuration

  E. Destination Port in SIP Trunk Security Profile configuration

  Correct Answer: CD

• Question 98:

  Refer to the exhibit.

  

  An engineer configures Cisco Unified Border Element to connect the enterprise VoIP network with a SIP telephony provider. Calls are not working in either direction. What must be configured in the dial peer 1 to fix the issue?

  A. answer-address 555 "¦"¦.

  B. codec G.729

  C. session-protocol sipv2

  D. incoming called number 555"¦"¦.

  Correct Answer: C

• Question 99:

  After configuring a Cisco CallManager Express with Cisco Unity Express, inbound calls from the PSTN SIP trunk receive a ring tone for 20 seconds and then a busy signal instead of voicemail. Which configuration fixes this problem?

  A. Router(config)# voice service voip Router(conf-voi-serv)#allow-connections h323 to h323

  B. Router(config)#dial-peer voice 2 voip Router(config-dial-peer)#no vad

  C. Router(config)# voice service voip Router(conf-voi-serv)#allow-connections voice-mail mod

  D. Router(config)# voice service voip Router(conf-voi-serv)#no supplementary-service sip moved-temporarily

  Correct Answer: D

  Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/guide/SCCP_and_SIP_SRST_Admin_Guide/srst_call_handling.html

• Question 100:

  What are two configuration features of the Standard Local Route Group deployment? (Choose two.)

  A. is associated under the route group

  B. is associated only under the route list

  C. chooses the route group that is configured under the device pool of the calling-party device

  D. chooses the route group that is configured under the device pool of the called-party device

  E. is assigned directly to the route pattern

  Correct Answer: BC