1. Home
  2. Cisco
  3. 350-601

Implementing and Operating Cisco Data Center Core Technologies (DCCOR)

Exam Details

  • Exam Code
    :350-601
  • Exam Name
    :Implementing and Operating Cisco Data Center Core Technologies (DCCOR)
  • Certification
    :CCNP Data Center
  • Vendor
    :Cisco
  • Total Questions
    :577 Q&As
  • Last Updated
    :Apr 15, 2025

Cisco CCNP Data Center 350-601 Questions & Answers

  • Question 201:

    DRAG DROP

    An engineer is implementing NetFlow on a Cisco Nexus 7000 Series Switch.

    Drag and drop the NetFlow commands from the left into the correct order they must be entered on the right.

    Select and Place:

  • Question 202:

    DRAG DROP

    An engineer deploys a custom guest shell rootfs onto multiple switches.

    Drag and drop the steps from the left into the correct order on the right.

    Select and Place:

  • Question 203:

    What is a characteristic of EPLD updates on Cisco MDS 9000 Series Switches?

    A. EPLD updates are installed only via the Cisco DCNM GUI

    B. EPLD packages update hardware functionality on a device

    C. EPLD bundles are released separately from a Cisco MDS NX-OS release

    D. EPLD updates are nondisruptive to traffic flow

  • Question 204:

    An engineer is configuring a vHBA template in UCS manager. The engineer needs to specify the logical address used by the vHBA and the path through which the SAN traffic flows. Which two resources must be specified in the vHBA template? (Choose two.)

    A. MAC addresses

    B. VLAN ID

    C. WWPN Pool

    D. WWNN

    E. Fabric ID

  • Question 205:

    A customer needs a tool to take advantage of the CI/CD model to streamline its operation and optimize cost. The customer wants to integrate the solution with the cisco products it currently it currently uses, Including Cisco ACI networking and Cisco UCS servers. The solution should also provide on-premises Kubernetes and AppDynamics performance monitoring. Because of the security requirements, the solution not install a local client on products under management.

    Which orchestration solution meets these requirements?

    A. Cisco APIC

    B. CISCO UCS director

    C. Cisco DCNM

    D. Cisco CloudCenter

  • Question 206:

    Refer to the exhibit.

    VLAN 10 is experiencing delays and packet drops when the traffic is forwarded through the switch. The destination flow analyzer accepts traffic captures of not more than 30 seconds. Which configuration implements the traffic capture that meets the requirements?

    A. Option A

    B. Option B

    C. Option C

    D. Option D

  • Question 207:

    An engineer must configure OSPF routing on Cisco Nexus 9000 Series Switches. The IP subnet of the Eth 1/2 interface for both switches must be advertised via OSPF. However, these interfaces must not establish OSPF adjacency or send routing updates. The current OSPF adjacency over the interface Eth1/1 on SW1 and Eth1/1 on SW2 must remain unaffected. Which configuration must be applied to both Nexus switches to meet these requirements?

    A. interface ethernet 1/2 passive-interface default

    B. Interface ethernet 1/2 Ip ospf network point-to-point

    C. interface ethernet 1/2 ip ospf passive-interface

    D. interface ethernet 1/2 no ip ospf passive-Interface

  • Question 208:

    Refer to the exhibit.

    An engineer must distribute all the host ports to use all eight configured FEX uplinks. The solution must minimize disruption if an uplink fails. Which action accomplishes this objective?

    A. Configure the eight uplinks in a port channel.

    B. Change the supported FEX type.

    C. Set the pinning max-links value to 8.

    D. Statically assign each host interface to a fabric uplink.

  • Question 209:

    An engineer configured an environment that contains the vPCand non-vPC switches, however, it was noticed that the downstream non-vPC switches do not receives the same STP bridge ID from the upstream which vPC feature must be implemented to ensure must be implemented to ensure that vPC and non-vPC switches receive the same STP bridge ID from the upstream vPC switch peers?

    A. peer-switch

    B. peer-gateway

    C. systam-mac 0123.4567.89ab

    D. vpc local role-priority 4000

  • Question 210:

    Refer to the exhibit.

    A network engineer requires remote access via SSH to a Cisco MDS 9000 Series Switch. The solution must support secure access using the local user database when the RADIUS servers are unreachable from the switches. Which command meets these requirements?

    A. aaa authentication none

    B. aaa authentication login default group radius

    C. aaa authentication login default fallback error local

    D. aaa authentication login default group local

Related Exams:

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Cisco exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 350-601 exam preparations and Cisco certification application, do not hesitate to visit our Vcedump.com to find your solutions here.