Cisco CCNP Collaboration 350-801 Questions & Answers

• Question 51:

  What are two reasons that AF41 is marked for the audio and video channels of a video call? (Choose two.)

  A. to allow high-definition quality calls over low-speed links

  B. to give video calls a higher priority than AF41 in the QoS policy

  C. to provide separate classes for audio calls and video calls

  D. to preserve lip synchronization between the audio and video channels

  E. to prioritize video over other high-priority traffic classes

  Correct Answer: CD

  Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab10/collab10/netstruc.html

• Question 52:

  Refer to the exhibit.

  

  An engineer is troubleshooting why PSTN phones are not receiving the caller's name when called from a remote Cisco UCM site. An ISDN PRI connection is being used to reach the PSTN. What must the administrator select to resolve the issue?

  A. isdn send display ie

  B. isdn enable clid

  C. isdn outgoing display-ie

  D. isdn supp-service name calling

  Correct Answer: D

  Reference: https://www.cisco.com/c/en/us/td/docs/ios/voice/command/reference/vr_book/vr_i2.html

• Question 53:

  What are two Cisco UCM location bandwidths that are deducted when G.729 and G.711 codecs are used? (Choose two.)

  A. If a call uses G.729, Cisco UCM subtracts 16k

  B. If a call uses G.711, Cisco UCM subtracts 80k

  C. If a call uses G.729, Cisco UCM subtracts 24k

  D. If a call uses G.711, Cisco UCM subtracts 64k

  E. If a call uses G.729, Cisco UCM subtracts 40k

  Correct Answer: BC

  After the call is established, the Cisco Unified Communications Manager will subtract bandwidth from the locations, depending on the codec that is used in that call. If the call is using G.711, Cisco Unified Communications Manager subtracts

  80k. If the call is using G.723, Cisco Unified Communications Manager subtracts 24k. If the call is using G.729, Cisco Unified Communications Manager subtracts 24k.

  Reference:

  https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/trouble/11_0_1/CUCM_BK_T1F7243A_00_troubleshooting-guide-cucm-1101/ device_issues.html

• Question 54:

  A company has an excessive number of call transfers to local and long-distance PSTN from Cisco Unity Connection voicemail. Which action in the Cisco Unity Connection restriction table resolves this issue?

  A. Block PSTN patterns on Default Transfer, Default Outdial, and Default System Transfer.

  B. Implement password complexity on voicemail boxes to prevent accounts from being compromised.

  C. Create a custom restriction table *********** and block it.

  D. Create a custom restriction table ??????????? and block it.

  Correct Answer: A

• Question 55:

  Which type of message must an administrator configure in the SIP Trunk Security Profile for a Message Waiting Indicator light to work with a SIP integration between Cisco UCM and Cisco Unity Connection?

  A. Unsolicited NOTIFY

  B. SIP Register

  C. 200 OK

  D. TCP port 5060

  Correct Answer: A

  Reference: https://www.uccollabing.com/troubleshooting-mwi-sip-cisco-unity-connection/

• Question 56:

  An administrator must make a pattern to route calls to two different destinations: [email protected] and [email protected]. Which type of patterns are needed in the Cisco UCM, and what must the pattern look like?

  A. A SIP route pattern that looks like this: *@company.com

  B. A regular route pattern with the URI feature enabled in the configuration page. The pattern must look like this: MATCH(*[email protected])

  C. A regular route pattern with the URI feature enabled in the configuration page. The pattern must look like this: (*@company.com)

  D. A SIP route pattern that looks like this: company.com

  Correct Answer: B

  https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmcfg/CUCM_BK_C95ABA82_00_admin-guide-100/CUCM_BK_C95ABA82_00_admin-guide-100_chapter_0100111.pdf

• Question 57:

  An administrator is troubleshooting an issue where an 8845 is not joining the correct voice VLAN configuration from a switch and they believe that LLDP is the issue. Which command allows the administrator to see the packets sent from the phone to the switch?

  A. show lldp status

  B. show lldp traffic

  C. show lldp

  D. show lldp run

  Correct Answer: B

  https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_37_ey/configuration/guide/scg/swlldp.pdf

• Question 58:

  Which Cisco Unity Connection handler plays a greeting that announces the option to dial a user extension by default?

  A. the Operator call handler

  B. the Goodbye call handler

  C. the Directory handler

  D. the Interview handler

  Correct Answer: B

  Reference: https://www.cisco.com/en/US/docs/voice_ip_comm/unity/3x/administration/guide/313/SAG_0200.html

• Question 59:

  Refer to the exhibit.

  

  Unanswered calls do not reach the voicemail associated with the phones. Instead, callers receive the default greeting. Which action fixes the configuration?

  A. Review the conversation manager logs on Cisco Unity Connection.

  B. Check the box "Redirecting Diversion Header Delivery - Outbound", then reset the trunk.

  C. Reboot Cisco Unity Connection.

  D. Check the box "Redirecting Diversion Header Delivery - Outbound".

  Correct Answer: B

• Question 60:

  Which program is required to deploy the Cisco Jabber client on an on-premises Cisco collaboration solution?

  A. Cisco Unity Connection

  B. Cisco Expressway-C

  C. Cisco UCM

  D. Cisco UCM IM and Presence

  Correct Answer: C

  Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/14_0/cjab_b_deploy-jabber-on-premises-14_0/cjab_b_deploy-jabber-on-premises-129_chapter_010000.html