Cisco Cisco Certifications 500-920 Questions & Answers

• Question 21:

  When booting up a Cisco UCS Server you want to see boot time diagnostic messages of the POST, what action is required for you to do so?

  A. Enable Quiet Boot on the Server's BIOS

  B. Restart the Server

  C. Disable Fast Boot on the Server's BIOS

  D. Enable Quiet Boot on the Server's Service Profile

  E. Disable Fast Boot on the Server's Service Profile

  Correct Answer: D

• Question 22:

  You are experiencing intermittent connectivity issues on one specific Cisco UCS server Some applications work, while other do not transfer data You suspect jumbo frames limitations

  Which two places do you check the jumbo frame settings? (Choose two )

  A. Check server's service profile and/or service profile template

  B. Check server's QoS System Class

  C. Check the fibre channel port configuration for jumbo frame configuration

  D. Check upstream switch ports frame size configuration

  E. Check server's individual vNICs and/or vHBAs properties

  Correct Answer: BD

• Question 23:

  Which statement regarding the UCS C-senes connectivity modes best describes connectivity options in a UCS Manager integrated environment?

  A. UCS C-series servers must be connected to Fabric Interconnects using Fabric Extenders (FEX)

  B. UCS C-series servers may be connected to multiple UCS Manager domains at the same time

  C. All UCS C-series servers in a single UCS Manager domain must share the same connectivity model

  D. UCS C-series servers may be connected with or without the use of Fabric Extenders (FEX) in environments running UCS Manager Software Release 2 2 or later

  Correct Answer: D

• Question 24:

  What is the next step after performing a UCS firmware upgrade, and downloading the latest drivers both for your RAID Controller and your Fibre Channel HBA?

  Check the HCL

  A. No Drivers are needed in a UCS environment

  B. Apply the device driver update to the devices

  C. No need to do anything Drivers are automatically installed for you

  D. Test device driver compatibility

  Correct Answer: D

• Question 25:

  The UCS Chassis Discovery Policy has been set to four and a new chassis is connected with two links What is the resulting chassis recognition action?

  A. The chassis will not be recognized

  B. The Chassis Discovery Policy will automatically reset to two links, since it always tracks the physical connections

  C. The chassis will be recognized and both links will be active

  D. The chassis will be recognized but only one of the links will be active.

  Correct Answer: A

• Question 26:

  Which statement best describes managing Cisco UCS servers using NX-OS CLI on the Fabric Interconnects?

  A. The NX-OS CLI on the Fabric Interconnects allows you to view, but not change the connectivity configuration between the Fabric Interconnects and an upstream LAN switch.

  B. The NX-OS CLI on the Fabric Interconnects allows you to manage QoS parameters on the Fabric Interconnects and an upstream LAN switch

  C. The NX-OS CLI on the Fabric Interconnects allows you to change the connectivity configuration between the servers and Fabric Interconnects

  D. The NX-OS CLI on the Fabric Interconnects allows you to change the connectivity configuration between the Fabric Interconnects and an upstream LAN switch.

  Correct Answer: D

• Question 27:

  Which command sequence is required to reset Cisco Integrated Management Controller (IMC) of a Cisco UCS Server?

  A. connect cimc | reset | validate

  B. scope cimc | reset | commit-buffer

  C. connect cimc | reset | commit

  D. scope cimc | reset | validate

  Correct Answer: B

• Question 28:

  What is the result of enabling the Core File Exporter in UCS Manager?

  A. A core dump file will be immediately created and transmitted using HTTP protocol

  B. A core dump must be remotely activated by Cisco TAC.

  C. A core dump will immediately be generated and will be exported

  D. If a subsequent triggering event occurs, a core dump will be generated and sent by TFTP

  Correct Answer: C

• Question 29:

  A Hard Drive (HDD) has been hot swapped in a UCS server blade, however, the UCS Manager GUI is not displaying updated metrics about the replacement drive. What action will be required to properly display updated metrics?

  A. Remove and re-insert the server blade HDD controller mezzanine card

  B. Reboot the Fabric Interconnects

  C. Reboot the server.

  D. Use the CLI, since HDD metrics cannot be displayed with the UCS Manager GUI

  Correct Answer: A

• Question 30:

  After installing a new UCS M4 server, which two Cisco Integrated Management Controller connectivity options do you have? (Choose two )

  A. XML API Access

  B. Web Access

  C. In-band Access

  D. SNMP

  E. Out-of-Band Access

  Correct Answer: AC