HP HP ASE HP0-S33 Questions & Answers

• Question 11:

  You are installing a second BladeSystem Onboard Administrator into a c7000 enclosure, what is required for a successful active/standby relationship?

  A. You must reboot the active OA.

  B. The same firmware version must be installed

  C. You must issue a failover to the newly installed OA

  D. The IP address for each OA must be sequential

  Correct Answer: B

  http://bladesystem.helpmax.net/en/configuring-the-hp-bladesystem-c7000-enclosure-and- enclosure- devices/onboard-administrator-module/standby-onboard-administrator-module/

  For an Active/Standby relationship, the two Onboard Administrator modules must have the same firmware version installed. If the firmware versions are not identical, the Insight Display and the main status screen of the Onboard Administrator identifies this error and alerts the user through SNMP if enabled.

• Question 12:

  What is a recommended best practice when installing multiple enclosures?

  A. Disable the Single Sign-On feature

  B. Place OA and iLO on separate subnets

  C. Use DHCP to avoid static addressing

  D. Place the OA on a management network

  Correct Answer: B

  http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00705292/c00705292.pdf (pag 20 Security considerations)

• Question 13:

  You are working with a customer who is planning to run critical applications on VMware virtual machines. A secondary data center is planned that will be used as a backup center in case of a disaster. Which product should you include in your proposal to satisfy the disaster recovery requirement for this solution?

  A. Site Recovery Manager

  B. Insight Control server migration

  C. vCenter Server Virtual Appliance

  D. Logical Server Migration

  Correct Answer: A

  http://www.vmware.com/products/site-recovery-manager/

• Question 14:

  A customer is running HP SIM in a headquarters that has three branch offices with multiple server blades managed by the HP SIM in a central location. Version Control Repository Manager is configured in all branch offices, but all deployment tasks should be performed from the central location. What must you configure first?

  A. all remote VCRMs properly licensed

  B. Secure tunnel between headquarters and the branch offices

  C. Additional CMS server in the brach offices that will not perform any management function and will work as a federated CMS and give access to the local VCRM

  D. Trust relationship between HP SIM and the machines running VCRM in remote locations

  Correct Answer: D

• Question 15:

  Which HP Gen8 technologies are required for Dynamic Power Capping at the rack level? (Select two)

  A. new racks with location awareness integrated into the rack

  B. Insight Control v7.1 or higher

  C. ILO v3 or newer

  D. Gen8 platinum power supplies

  E. Inteligent PDU (iPDU)

  Correct Answer: DE

• Question 16:

  The Remote Deployment Pack software enables the Rip-and-Replace functionality. You can use Rip-and- Replace to assign a particular function or role to which device?

  A. ProLiant BL server

  B. Onboard Administrator

  C. Virtual Connect Module

  D. ProLiant Gen8 DL based server

  Correct Answer: A

  http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01154890/c01154890.pdf (pag17)

• Question 17:

  How should you implement complete end-to-end 10 GbE network connectivity in a BladeSystem solution?

  A. NC360m mezzanine cards and Cisco 3120G switch

  B. Flex-10 mezzanine cards and ProCurve 6120G/XG switch

  C. FlexFabric mezzanine cards and Cisco 3120X switch

  D. Flex-10 mezzanine cards and ProCurve 6120XG switch

  Correct Answer: D

  http://h18004.www1.hp.com/products/blades/components/ethernet/6120xg/index.html

• Question 18:

  Which ProLiant series model provides density optimized for flexibility and manageability?

  A. DL

  B. BL

  C. SL

  D. ML

  Correct Answer: A

  http://www.hp.com/canada/products/static/proliant/index.html

• Question 19:

  What is a key feature of the HP Sizer for Microsoft Hyper-V 2008 R2?

  A. enables comparisons of different solution configurations

  B. Calls the Salesbuilder Workbench application to create a validated configuration

  C. Ability to direct output into the Microsoft Assessment and Planning tool

  D. Creates a Matrix Operating Environment template (or Cloudmap) from the results

  Correct Answer: A

  http://h71019.www7.hp.com/ActiveAnswers/us/en/sizers/microsoft-hyper-v2008.html

  The HP Sizer for Microsoft Hyper-V 2008 R2 is an automated, downloadable tool that provides quick and helpful sizing guidance for "best-fit" HP server and storage configurations running in a Hyper-V R2 environment. The tool is intended to

  assist with the planning of a Hyper-V R2 virtual server deployment project.

  It enables the user to quickly compare different solution configurations and produces a customizable server and storage solution complete with a detail Bill of Materials (BOM) that includes part numbers and prices.

• Question 20:

  What are examples of shared-nothing clustering models? (Select two)

  A. HP Integrity NonStop

  B. Oracle Parallel Database Cluster

  C. Microsoft Cluster Servers

  D. HP ServiceGuard

  E. EMC Vinca Co-StandbyServer

  Correct Answer: BC