HP HP Certification III HP2-T16 Questions & Answers

• Question 91:

  Which server provides resolution from the hostname to the IP address?

  A. FTP

  B. PXE

  C. DNS

  D. DHCP

  Correct Answer: C

  {\rtf1\ansi\ansicpg936\deff0\deflang1033\deflangfe2052{\fonttbl{\f0\fnil\fcharset0 MS Shell Dlg 2;}} \viewkind4\uc1\pard\lang2052\f0\fs17 Industry Standard Architecture - Student Guide 1 - Page 17\par Domain Name Server (DNS) ?Provides resolution from hostnames to IP addresses and so forth\par }

• Question 92:

  Which transfer rate does USB 2.0 support?

  A. 32Mb/s

  B. 64Mb/s

  C. 64Mb/s to 120Mb/s

  D. 120Mb/s to 240Mb/s

  Correct Answer: D

  {\rtf1\ansi\ansicpg936\deff0\deflang1033\deflangfe2052{\fonttbl{\f0\fnil\fcharset0 MS Shell Dlg 2;}} \viewkind4\uc1\pard\lang2052\f0\fs17 Industry Standard Architecture - Student Guide 1 - Page 183\par USB 2.0 extends the capabilities of the interface from 12Mb/s (200 x 56Kb/s) to between 120 and 240Mb/ s.\par }

• Question 93:

  In systems with AMD processors, what allows communication between processors and the I/O subsystem?

  A. Northbridge

  B. Southbridge

  C. HyperTransport link

  D. APIC

  E. QuickPath Interconnect

  Correct Answer: C

  {\rtf1\ansi\ansicpg936\deff0\deflang1033\deflangfe2052{\fonttbl{\f0\fnil\fcharset0 MS Shell Dlg 2;}} \viewkind4\uc1\pard\lang2052\f0\fs17 Industry Standard Architecture - Student Guide 1 - Page 37\par AMD processors are able to communicate with each other through HyperTransport point-to-point links. This enables one processor to access the memory connected to another processor. Inside the processor, a crossbar switch connects the processor, memory controller, and HyperTransport links.\par AMD processors also use HyperTransport links to connect to the I/O subsystem.\par The links on particular processors are connected to I/O tunnels that support the I/O devices.\par All other processors can communicate with the I/O system through the HyperTransport links.\par Legacy devices are also connected to one of the I/O tunnels.\par }

• Question 94:

  Which statements are true about active and passive cooling systems? (Select two)

  A. A passive cooling system uses only heat sinks.

  B. An active cooling system uses only heat sinks.

  C. An active cooling system adds devices such as fans.

  D. A passive cooling system adds devices such as fans.

  Correct Answer: AC

  {\rtf1\ansi\ansicpg936\deff0\deflang1033\deflangfe2052{\fonttbl{\f0\fnil\fcharset0 MS Shell Dlg 2;}} \viewkind4\uc1\pard\lang2052\f0\fs17 Industry Standard Architecture - Student Guide 1 - Page 26\par A passive cooling system utilizes heat sinks and natural convection. Heat sinks are blocks of metal that absorb heat and have fins or ridges to dissipate the heat.\par An active cooling system adds mechanical means. Fans are added to blow cooling air across or through the heat sink and other interior parts.\par }

• Question 95:

  Which events could require a firmware update? (Select two)

  A. downgrading memory

  B. re-installing the operating system

  C. adding support for larger, faster drives

  D. adding virtual machines to a server

  E. removing an existing processor

  F. adding plug and play support

  Correct Answer: CF

  {\rtf1\ansi\ansicpg936\deff0\deflang1033\deflangfe2052{\fonttbl{\f0\fnil\fcharset0 MS Shell Dlg 2;}} \viewkind4\uc1\pard\lang2052\f0\fs17 Industry Standard Architecture - Student Guide 2 - Page 177\par It may be necessary to upgrade the system BIOS or firmware for one or more of the following reasons:\par To support new hardware or features on the server\par To correct bugs discovered in the BIOS\par To fix a security hole in the BIOS\par To add support for newer or faster processors\par To add Plug and Play support\par To add support for larger or faster hard drives\par To add support for special removable drives, such as LS-120 or ZIP drives\par }

• Question 96:

  What must you check prior to adding another processor to an existing system. (Select three)

  A. amount of memory in the system

  B. compatibility of the new process with existing processors

  C. firmware requirements for the new processor

  D. number of users currently logged into the system

  E. number of processors the operating system supports

  F. weight of the new processor

  Correct Answer: BCE

• Question 97:

  How many address lines does an Intel Xeon processor use, and what is the maximum amount of accessible, addressable memory?

  A. 32 address lines; 64GB addressable memory

  B. 36 address lines; 4GB addressable memory

  C. 36 address lines; 64GB addressable memory

  D. 64 address lines; 64GB addressable memory

  Correct Answer: C

  {\rtf1\ansi\ansicpg936\deff0\deflang1033\deflangfe2052{\fonttbl{\f0\fnil\fcharset0 MS Shell Dlg 2;}} \viewkind4\uc1\pard\lang2052\f0\fs17 Advantages of EM64T\par 64-bit allows an installation of up to 16 EB (exabyte) of RAM; however, current Celeron D, Pentium 4, and Xeon CPUs have 36 address lines, which can support 64 GB of RAM , while Xeon DP CPUs can hold up to 1 TB (terabyte)\par }

• Question 98:

  Which statement is true about PCI Express architecture?

  A. Data is sent serially.

  B. PCI Express utilizes more pins than PCI-X.

  C. PCI Express transfers data in half-duplex.

  D. Data is sent in paralell.

  Correct Answer: A

• Question 99:

  Your server is running Windows 2003 and you are experiencing network performance issues. What can you do to determine if the bottleneck is the network card?

  A. Replace the NVRAM on the network card.

  B. If the server contains multiple network cards, remove all but one card.

  C. Run the system monitor applet to monitor the network throughput.

  D. Add NVRAM to the network card.

  Correct Answer: C

• Question 100:

  Which statement is true about the installation of DIMM memory modules?

  A. A bank of DIMMs cannot contain DIMMs of mixed size and speed.

  B. DIMMs with gold pins can be used on system boards with gold planet and tin plated contacts.

  C. DIMMs with 144 pins provide error checking and correcting capabilities.

  D. Performance defaults to the highest DIMM speed.

  Correct Answer: A

  {\rtf1\ansi\ansicpg936\deff0\deflang1033\deflangfe2052{\fonttbl{\f0\fnil\fcharset0 MS Shell Dlg 2;}} \viewkind4\uc1\pard\lang2052\f0\fs17 Industry Standard Architecture - Student Guide 2 - Page 118:\par Depending on the server model and memory technology, installations might require that memory be added in banks of four DIMMs. Mixing of 50ns and 60ns memory is permitted; however, each bank of four DIMMs must contain the same size and speed DIMMs.\par }