HP HP Certification III HP2-T16 Questions & Answers

• Question 11:

  What is the most efficient way to use external DVD-ROM for ten servers in one rack?

  A. Use seperate USB DVD-ROMs for each server.

  B. Connect servers to the KVM switch with attached DVD-ROM.

  C. Use one DVD-ROM and connect to a single server when needed.

  D. Connect servers to a SAN switch with attached DVD-ROM.

  Correct Answer: C

• Question 12:

  When should a performance baseline be captured?

  A. after updating the server ROM

  B. during the peak server usage

  C. after any hardware or software additions to the system

  D. after replacing a failed component

  Correct Answer: C

  {\rtf1\ansi\ansicpg936\deff0\deflang1033\deflangfe2052{\fonttbl{\f0\fnil\fcharset0 MS Shell Dlg 2;}} \viewkind4\uc1\pard\lang2052\f0\fs17 Industry Standard Architecture - Student Guide 2 - Page 217:\par Establishing a baseline This baseline should be captured after initial installation of the equipment, during normal daily operation. The baseline should be updated after any hardware or software additions to the system.\par }

• Question 13:

  Which protocols are used by in-band management? (Select two)

  A. TCP/IP

  B. IPX

  C. SNMP

  D. SCSI

  E. MPIO

  Correct Answer: AC

  {\rtf1\ansi\ansicpg936\deff0\deflang1033\deflangfe2052{\fonttbl{\f0\fnil\fcharset0 MS Shell Dlg 2;}} \viewkind4\uc1\pard\lang2052\f0\fs17 Industry Standard Architecture - Student Guide 2 - Page 155:\par Managing hardware remotely\par In-band management is the best choice for most servers that are accessed through standard connections and when the operating system is functioning. It provides a wider range of functions and greater security because it can depend heavily on the specific management tool in use. In-band management is appropriate for wired and wireless devices. It is functions independently from switch/router platforms and versions.\par TCP/IP and SNMP are used to manage the devices. The control and management data share the same network.\par }

• Question 14:

  What devices off the highest and most sophisticated level of security when restricting access to a server rom? (Select two)

  A. retinal scanner

  B. proximity card reader

  C. mechanical lock

  D. fingerprint scanner

  E. reinforced steel door

  F. bulletproof window

  Correct Answer: AD

  {\rtf1\ansi\ansicpg936\deff0\deflang1033\deflangfe2052{\fonttbl{\f0\fnil\fcharset0 MS Shell Dlg 2;}} \viewkind4\uc1\pard\lang2052\f0\fs17 Industry Standard Architecture - Student Guide 2 - Page 202:\par Recognizing and reporting physical security issues\par Biometric locks ?This is the latest and most sophisticated technology that relies on a measurable physical characteristic such as a retinal scan, speech pattern, or fingerprint. As with card readers, this technology also allows tracking who has accessed a room.\par }

• Question 15:

  What is problematic for adata center? (Select two)

  A. low humidity

  B. high humidity

  C. carbon dioxide fire supression system

  D. seperate console room for KVM stations

  E. inline UPS

  Correct Answer: AB

  {\rtf1\ansi\ansicpg936\deff0\deflang1033\deflangfe2052{\fonttbl{\f0\fnil\fcharset0 MS Shell Dlg 2;}} \viewkind4\uc1\pard\lang2052\f0\fs17 Industry Standard Architecture - Student Guide 2 - Page 204:\par Recognizing and reporting environmental issues\par Humidity ---The humidity in the server room is another environmental quality that is critical to the proper functioning of the server. The air conditioning system for the room often controls the humidity as well as the temperature.\par 1.Too much humidity in the air can damage the server? electronic components. In humid conditions, moisture can condense on the circuit boards and other components and cause short circuits or corrosion. \par 2.Too little humidity in the air can subject the server to electrostatic discharge which also can damage the server? components.\par }

• Question 16:

  Which type of information is obtained during the site survey? (Select two)

  A. biggest IT problem today

  B. capacity of electrical circuits

  C. projected role of the server

  D. facility size

  Correct Answer: BD

  {\rtf1\ansi\ansicpg936\deff0\deflang1033\deflangfe2052{\fonttbl{\f0\fnil\fcharset0 MS Shell Dlg 2;}} \viewkind4\uc1\pard\lang2052\f0\fs17 Industry Standard Architecture - Student Guide 2 - Page 99:\par Conducting a site survey\par To evaluate these factors, you can use survey questions to gather data, as demonstrated by the following examples:\par How large is the facility?\par Does the facility currently have any radio frequency interference (RFI) problems?\par Is there any extra space?\par Will an existing space need to be modified?\par Are adequate utility outlets available in the proposed space?\par Are the electrical circuits of sufficient capacity?\par }

• Question 17:

  You are implementing a tape backup solution on a customer's site. The customer's servers are located in two different fire compartments 10m apart. Which SCSI standard can be used at the lowest cost for this environment to integrate a tape library in a different fire compartment?

  A. Ultra

  B. Fast

  C. LVD

  D. Fibre Channel

  Correct Answer: C

  {\rtf1\ansi\ansicpg936\deff0\deflang1033\deflangfe2052{\fonttbl{\f0\fnil\fcharset0 MS Shell Dlg 2;}} \viewkind4\uc1\pard\lang2052\f0\fs17 Industry Standard Architecture - Student Guide 1 - Page 213:\par Cables\par The type of SCSI cable used depends on the protocol and configuration. Cable selection can be confusing because SCSI has a variety of protocols and configurations and differential and single-ended SCSI devices look identical.\par

  }

• Question 18:

  Which RAID technology provides the most capacity with the same number of disks?

  A. RAID 0

  B. RAID 1

  C. RAID 4

  D. RAID 5

  Correct Answer: A

• Question 19:

  Your customer's workstation has four 15K rpm SAS drives. The customer wants the best possible performance, and is not concerned about data loss. Which RAID level best meets this customer's needs?

  A. RAID 0

  B. RAID 1

  C. RAID 5

  D. RAID 6

  Correct Answer: A

  {\rtf1\ansi\ansicpg936\deff0\deflang1033\deflangfe2052{\fonttbl{\f0\fnil\fcharset0 MS Shell Dlg 2;}} \viewkind4\uc1\pard\lang2052\f0\fs17 Industry Standard Architecture - Student Guide 1 - Page 225:\par RAID 0 ---Disk striping\par RAID 0 is not fault tolerant and is often used in situations that are not mission-critical, where performance and capacity are more important than uptime. RAID 0 is the only non-fault-tolerant RAID level supported by HP.\par Because RAID 0 has no overhead associated with duplication of information, it provides the highest performance. Both read and write requests can use all member disks simultaneously.\par }

• Question 20:

  Which kind of RAID best suits database log files and offers redundancy and usually better performance?

  A. RAID 0

  B. RAID 1

  C. RAID 5

  D. RAID 6

  Correct Answer: B