HP HP ATP HP2-T26 Questions & Answers

• Question 91:

  How is a backup of the Onboard Administrator (OA) performed?

  A. by using the CLI of interconnect in bay 1

  B. by using the GUI

  C. by copying the activeoa.cfg file to the USB drive

  D. by recording the configuration on a CD using CD-RW attached to the OA USB port

  Correct Answer: B

• Question 92:

  You have to update firmware of the Onboard Administrator (OA) but you have no access to the GUI. What is required to flash OA firmware from the CLI?

  A. FTP/TFTP server with OA firmware image available

  B. OA certificate applied on the machine from which the update is performed

  C. service account credentials

  D. access to the Insight Display service menu

  Correct Answer: A

• Question 93:

  You want to be able to capture and store for replay the console video during a server's last major fault or boot sequence for troubleshooting purposes. What does this require?

  A. recording agent running on Insight Display

  B. iLO firmware higher than 2.60

  C. Onboard Administrator module with KVM

  D. iLO Advanced License

  Correct Answer: D

• Question 94:

  A customer is experiencing drive encryption issues with a BL490c Server Blade running Microsoft Windows Server. The Trusted Platform Module (TPM) is suspected as the cause. What must be done to replace the TPM? (Select two.)

  A. The TPM must be cleared.

  B. BitLocker must be disabled.

  C. The TPM Visibility option must be set to hide so it is not visible to the OS.

  D. The TPM must be replaced, as it is a customer installable option.

  E. The TPM and system board must be replaced at the same time.

  Correct Answer: BE

• Question 95:

  After the replacement of an HP StorageWorks Ultrium Tape Blade, the new unit should be tested. What is the recommended diagnostic and support tool for c-Class tape blades?

  A. Backup Exec Tape Diagnostic Support Tool for HP c-class BladeSystems

  B. HP c-class BladeSystem Tape Blade Sizer and Diagnostic Tool

  C. HP BladeSystem c-Class Tape Blade Diagnostic Tool from the SmartStart CD

  D. HP StorageWorks Library and Tape Tools

  Correct Answer: D

• Question 96:

  Which action should you take first when the Insight Display goes dark?

  A. Reboot Onboard Administrator.

  B. Connect Insight Display to the diagnostic station and perform all tests.

  C. Press any button on Insight Display to reactivate the screen.

  D. Replace Insight Display as it is broken.

  Correct Answer: C

• Question 97:

  Refer to the exhibit below.

  

  From the main menu shown in the exhibit, which menu should you select from Insight Display to check the Onboard Administrator Service IP address?

  A. Health Summary

  B. Enclosure Settings

  C. Enclosure Info

  D. Blade or Port Info

  Correct Answer: C

• Question 98:

  Refer to the exhibit below.

  

  A customer reports that Insight Display shows five NICs installed in a half-height server blade, but a connection to only two of them can be established. What could cause this to happen?

  A. The NICs and interconnect modules are running different firmware revisions.

  B. The NICs and iLO share the same interface.

  C. Some interconnect modules are powered off.

  D. The NICs are multifunction cards and also operate in iSCSI mode.

  Correct Answer: D

• Question 99:

  Which information can the user access from an HP Array Diagnostics Utility (ADU) report? (Select two.)

  A. array accelerator status

  B. outstanding I/Os

  C. Reserved Information Sector (RIS) data

  D. test connection rate

  Correct Answer: AC

• Question 100:

  What provides information on the software inventory of a server and available updates?

  A. HP Subscribers Choice

  B. HP System Management Homepage (SMH)

  C. Version Control Agent (VCA)

  D. Version Control Repository Manager (VCRM)

  Correct Answer: C