HP ASE HP2-Z33 Questions & Answers

• Question 41:

  HP has released a new version of an access controller software package file. How does the network administrator activate the new software version?

  A. by interrupting the boot sequence and selecting the Update Bootware option

  B. by interrupting the boot sequence and selecting the Boot Extend Bootware option

  C. by interrupting the boot sequence and selecting the Boot Backup Bootware option

  D. by interrupting the boot sequence and selecting the Update Full Bootware option

  Correct Answer: B

• Question 42:

  An organizations BOYD security policy states that if an employee wants to connect to the company's wireless network with their personal devices, they must meet the following requirements:

  1.

  A digital certificate must be installed on the employee's personal device and used to authenticate the device.

  2.

  The device must be authenticated using the local EAP authentication server.

  Which EAP authentication method is available on the access controller to support this configuration?

  A. EAP-MSCHAPv2

  B. EAP-PEAP

  C. EAP-TLS

  D. EAP-TTLS

  Correct Answer: C

• Question 43:

  The Wireless Intrusion Prevention System (WIPS) determines that a client has exceeded the maximum number of authentication requests that a client should make in the allowed period. What does the WIPS system do?

  A. adds the client's MAC address to the static blacklist on the access controller

  B. adds the client's MAC address to the static blacklist on the access point

  C. adds the client's MAC address to the dynamic blacklist for the access point

  D. removes the client's MAC address from the whitelist on the access controller

  Correct Answer: C

• Question 44:

  An organization's security policy mandates the use of 802.1X port based authentication. The organization's security policy also mandates that before an employee's personal device can connect to the wireless network, it must download anti-virus, security patch, and other essential software. What should be configured on the access point to support these requirements?

  A. EAP-TLS

  B. dynamic WEP

  C. portal authentication

  D. 802.1X guest VLAN

  Correct Answer: D

• Question 45:

  Where can a network administrator check for successful authentication in User Access Manager?

  A. User Access Log > Auth Failure Log

  B. User Access > LDAP Users

  C. User Access Log > Access Details

  D. User Access > Access Device Log

  Correct Answer: C

• Question 46:

  Which action does the Wireless Intrusion Prevention System (WlPS) take when it detects that a device is sending frames with a fixed initialization vector?

  A. captures the frames for future analysis

  B. logs the event

  C. deauthenticates the user

  D. adds the device to the dynamic blacklist

  Correct Answer: B

• Question 47:

  A company decides to use the local portal server function on the HP Unified Wired-WLAN controller. Which rule applies when customizing the default authentication pages?

  A. Do not modify the logon failure page.

  B. The authentication page files must not exceed 50 MB.

  C. Do not change the names of the main authentication page files.

  D. Do not compress the authentication page files.

  Correct Answer: C

• Question 48:

  A research company wants to deploy a high throughput 802.11n only wireless network. The network administrator selects the "client dot11n-only" option. Which other configuration option must the network administrator configure?

  A. maximum MCS index

  B. basic rate 6Mb/s

  C. mandatory rates MCS0-MCS15

  D. MCS15 data rate

  Correct Answer: A

  Configuring 802.11n Rates

  Introduction to MCS

  Configuration of mandatory and supported 802.11n rates is achieved by specifying the maximum Modulation and Coding Scheme (MCS) index. The MCS data rate table shows relations between data rates, MCS indexes, and parameters that

  affect data rates. A sample MCS data rate table in the 20 MHz mode is shown in Table 1-4. For the whole table, refer to IEEE P802.11n D2.00.

  Table 1-4 MCS data rate table (20 MHz)

• Question 49:

  When does DHCP fingerprinting of endpoints occur within an HP BYOD solution?

  A. when User Access Manager validates the user account

  B. when endpoints access the BYOD registration page

  C. when endpoints obtain an IP address

  D. when endpoints are authenticated

  Correct Answer: C

• Question 50:

  What is an attribute of an autonomous AP?

  A. managed through a Web browser or a command line interface

  B. supported on the HP 425 AP

  C. must be powered by a PoE switch

  D. supports layer 2 and layer 3 roaming

  Correct Answer: A