Huawei Huawei Certifications H35-211 Questions & Answers

• Question 211:

  Single) Regarding MA5680T multicast, which one is incorrect?

  A. The report sent by the user is captured on the board logic and sent to the CPU of the board.

  B. The multicast program creation mode is divided into static configuration and dynamic join.

  C. When igmp match mode is disabled, you need to configure the multicast program group.

  D. Add igmp user under BTV. By default, a multicast user can watch 8 programs.

  Correct Answer: C

• Question 212:

  (single) Regarding the Ethernet switch, which of the following statements is correct?

  A. The LAN Switch mainly searches for the corresponding IP address based on the MAC address of the data packet to implement data packet forwarding.

  B. The LAN Switch may not recognize the MAC address, but must identify the IP address.

  C. Compared with the shared Hub, one port of the LAN Switch can be said to be a separate collision domain.

  D. When the LAN Switch receives a packet containing an unrecognized MAC address, it sends the packet directly back from the received port.

  Correct Answer: C

• Question 213:

  (multiple) Which of the following voice protocols are based on IP bearers?

  A. V5

  B. H248

  C. MGCP

  D. SIP

  Correct Answer: BCD

• Question 214:

  (multiple) VoIP users can hear normal dial tone after picking up the phone, but after dialing, the dial tone does not stop. What are the possible reasons?

  A. MGC did not issue signaling to stop dialing the dial tone.

  B. The A/ law setting of the DSP subboard is inconsistent with the user board.

  C. Adjacent user side slot small network is not removed

  D. MG did not correctly report the off-hook signal

  Correct Answer: ABD

• Question 215:

  (single) Which of the following queue scheduling techniques does the MA5600T/MA5680T support?

  A. CBQ

  B. PQ

  C. WFQ

  D. CQ

  Correct Answer: B

• Question 216:

  (single) What does the list that the ToolBox tool can track does not include?

  A. V5 Layer 2 message tracking

  B. H248 signaling tracking

  C. MGCP signaling tracking

  D. RTCP information

  Correct Answer: D

• Question 217:

  (multiple) What are the descriptions of the user number tracking function?

  A. Only supports H248 protocol

  B. Only supports MGCP protocol

  C. You can use the phone number to initiate tracing, or you can use the slot port number to initiate tracing.

  D. Any user has permission to perform user number tracking in diagnostic mode

  Correct Answer: ABD

• Question 218:

  (multiple) What are the port migration schemes in the access network?

  A. Jumper multiplex

  B. Internal line multiplexing

  C. External three-way multiplex

  D. Device subscriber line switching

  Correct Answer: ABCD

• Question 219:

  (single) After installing the sybase patch, which of the following commands can display the version information of the sybase patch that has been installed?

  A. 1>select @@version2>go

  B. 1>select @@patch2>go

  C. 1>version_help2>go

  D. 1>ver_help2>go

  Correct Answer: A

• Question 220:

  (multiple) When the MA5680T performs traffic policing (Car), it usually uses three-color dual rate. What are the three colors of the three colors here?

  A. Red

  B. Huang

  C. Blue

  D. Green

  Correct Answer: ABD