HP HP Certifications HPE0-V14 Questions & Answers

• Question 181:

  A client needs a data center network for a highly-virtualized server environment. They have the following requirements:

  1.

  25 Gb connectivity from the servers to the top-of-rack switches

  2.

  support for iSCSl storage

  3.

  lowest possible latency between their VM farms, which are contained In separate cabinets and connected to different top-of-rack switches within the data center

  4.

  support for Python script interpretation and open APIs Which networking product line and architecture should you recommend?

  A. ArubaOS-Swrtch configured in a spine/leaf architecture with 5406R switches at the spine and 2930M leaf switches

  B. ArubaOS-CX configured in a spine/leaf architecture with 8325 switches at the spine and 8320 leaf switches utilizing VSX between cabinets

  C. ArubaOS-CX configured in spine/leaf architecture with 8325 switches at the spine and leaf

  D. HPE FlexFabicc configured in a traditional two-tier architecture with 5950 switches at the core and 5940 access switches configured using IRF stacks per cabinet

  Correct Answer: A

• Question 182:

  A customer needs to share files cost-effectively among their Microsoft Windows server over a local network. Which storage solution meets this requirement?

  A. Storage Area Network (SAN)

  B. Network File System (NFS)

  C. Direct Attached Storage (DAS)

  D. Network Attached Storage (NAS)

  Correct Answer: D

• Question 183:

  A local state college is implementing a new VDI cluster to support computer and testing labs. They have the following requirements:

  1.

  Three VMware ESXi Hosts, each with one AMD processor, 1 TB of RAM, 16 Gbps FC Dual Port HBA.

  2.

  HPE Nimble AF20 with 17 TB usable capacity.

  3.

  Integration into an existing HPE FlexFabric 5710 and HPE SN3000B Fibre Channel SAN switches.

  4.

  The solution must fit in 7U of rack space. If the customer needs more capacity in the future, they will use scale-out growth. Which server model should you recommend to this client?

  A. HPE DL385

  B. HPE DL380

  C. HPE DL360

  D. HPE DL325

  Correct Answer: B

• Question 184:

  Refer to the exhibit.

  

  When performing a code upgrade on an HPE Nimble array, you noticed a connection failure on ESX1. Refer to the exhibit showing the complete zoning configuration of one of the HPE SN3000B switches. What should you do to ensure storage access is not interrupted when doing the next update?

  A. Create and ISL between the two HPE SN3000B switches.

  B. Create a new zone for ESX1 and the second storage controller.

  C. Change the timeout values on the SN3000B switch.

  D. Configure the same zone on a second HPE SN3000B.

  Correct Answer: B

• Question 185:

  What connection type is identified by the following address type? B4-D5-BD-9F-0A-C3

  A. IPV6

  B. ISCSI

  C. MAC Address

  D. WWN

  Correct Answer: D

• Question 186:

  You are installing a DL385 GEN10 LFF server at a customer site. The customer has a P8i6i-a RAID controller in the host After installing the provided 8 LFF disks in the front drive Days, you realize that the order also included two more SFF drives for the OS to boot from, but there are no SFF drive slots in the server, because it shipped from the factory.

  Which action must be performed to finish the installation?

  A. Order the optional Premium 6 SAS/SATA+2 NVMe cage to house the two SFF drives.

  B. install the two SFF drives in the two included SFF slots in the universal Media Bay.

  C. Give the two SFF drives to the customer to keep on-site in case of future drive failure.

  D. Order the optional 2-SFF rear drive box to house the two SFF drives

  Correct Answer: D

• Question 187:

  Which HPE Proliant server should you recommend for a home office environment where the server will be located in the same office as the user?

  A. HPE ML110

  B. HPE DL20

  C. HPE MicroServer

  D. HPEXL170r

  Correct Answer: A

• Question 188:

  What is a primary benefit of DAS?

  A. It takes advantage of Common Internet File System (CIFS).

  B. It is presented as an iSCSI LUN to the attached server.

  C. It can be accessed by both server and non-server devices simultaneously.

  D. It is connected directly to a server.

  Correct Answer: D

• Question 189:

  Which hardware and software components make up a Nimble dHCI infrastructure?

  A. HPE M-Series switch, HPE ProLiant DL servers, HPE Nimble, and VMware

  B. Aruba Switches, HPE Synergy, HPE Nimble, and VMware

  C. HPE M-Series switch, HPE ProLiant DL servers, HPE Nimble, and Hyper-V

  D. Aruba Switches, HPE Synergy, HPE Nimble, and Hyper-V

  Correct Answer: A

  Reference: https://community.hpe.com/t5/HPE-Storage-Tech-Insiders/HPE-Nimble-Storage-dHCI-Technical-Overview/ba-p/7054163#.XnxfMW5RWQ4

• Question 190:

  A customer has a single ProLiant DL580 Gen10 running ESXI 7.0. They want to remotely power on the server.

  Which locally available management tool should they use to complete this task?

  A. HPE Composer

  B. ILO Advanced

  C. ILO Amplifier Pack

  D. HPE Oneview standard

  Correct Answer: B