HP HP Certifications HPE0-V14 Questions & Answers

• Question 191:

  Where would a customer go to run the SSD wear Gauge report on an HPE ProLiant server?

  A. OneView Standard

  B. UEFI System Bios

  C. insight Diagnostics

  D. Smart Storage Administrator

  Correct Answer: D

• Question 192:

  You are validating a configuration prior to quoting it for the customer. You plan to propose the following configuration:

  Two HPE DL380 Gen10 servers with dual processors, 256GB of memory, dual 10Gb NICs, SN1100Q 16Gb dual port FC HBA, dual 800W power supplies, and high temperature fan kit HPE Nimble HF20H with 11TB storage, 960GB of cache, dual port 10GbE NIC, and 16Gb dual port FC adapter kit Two SN3000B FC Switches

  Which tool should you use to verify firmware compatibility between the storage and server components in this proposed solution?

  A. HPE NinjaSTARS

  B. HPE One Configuration Advanced

  C. HPE OneView Advanced

  D. HPE SPOCK

  Correct Answer: D

• Question 193:

  A customer's backup administrator is responsible for maintaining and coordinating all nightly backups of the company's 30 servers. Which HPE product can be used as the primary interface to orchestrate all backup targets and Catalyst copy functions?

  A. HPE StoreServ

  B. Smart Storage Administrator

  C. Intelligent Provisioning

  D. StoreOnce Management Console

  Correct Answer: D

• Question 194:

  A client complains about systems reliability issues caused by their staff's inability to identify the root cause of failures. The client's lead administrator wants to automatically send data from HPE OneView to additional listeners in the network. What should you configure in HPE OneView to enable the external monitoring of the managed devices?

  A. Configure a scope to include the listener.

  B. Configure SNMP Trap Forwarding.

  C. Configure scheduled reports to export the data to the listener.

  D. Configure the listener as a managed device.

  Correct Answer: B

  Reference: https://h20195.www2.hpe.com/v2/getpdf.aspx/4AA5-3811ENW.pdf?

• Question 195:

  Refer to the exhibit.

  

  You observed some high temperature alerts on a switch shown in the middle rack of the exhibit. The cooling in the data center is following best practices for the layout in the exhibit. The switch is an HPE 5945 series switch, and all the fans are operating normally. The switch is racked so that its ports face the rear of the rack. The administrator noticed the fan modules have red handles.

  What should the administrator do to resolve the issue?

  A. Replace the fan modules with port-to-power fan modules.

  B. Add additional fan modules to the switch.

  C. Replace the fan modules with power-to-port fan modules.

  D. Change the fan direction with the fan preferred direction command.

  Correct Answer: D

• Question 196:

  What is an access port on an Ethernet switch?

  A. A port that carries FCP frames inside the network

  B. A port that carries multiple VLANs

  C. A port that is connected to an FCF

  D. A port that carries untagged frames inside the network

  Correct Answer: D

  Reference: https://support.hpe.com/hpesc/public/docDisplay?docId=mmr_kc-0102233

• Question 197:

  A customer needs a single, dual-processor server for an Enterprise Resource Planning solution for a single office. The customer application uses a mix of HDDs and SSDs and up to 3TB of RAM. Which HPE Solution should you propose?

  A. HPE Synergy Solution

  B. HPE Apollo 2000 Server

  C. HPE ML350 Gen10

  D. HPE ML110 Gen10

  Correct Answer: D

  Reference: https://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA0-8758ENW.pdf

• Question 198:

  When is it appropriate for a customer to implement HPE OneView Standard?

  A. To manage multiple servers

  B. To monitor their services

  C. To enable the Advanced iLO license

  D. To update firmware

  Correct Answer: B

  Reference: https://h20195.www2.hpe.com/v2/GetPDF.aspx/c04111367.pdf

• Question 199:

  A customer plans to use HPE ProLiant servers for line-of-business applications. They want to configure the servers to increase reliability.

  Which workload profile should the customer use?

  A. Virtualization Max Performance

  B. Transactional Application Processing

  C. I/O Throughput

  D. Mission Critical trade performance and reliability

  Correct Answer: D

• Question 200:

  A customer is planning to deploy a branch office server rack. The environment will have the following requirements:

  1.

  Single rack with 20 HPE ProLiant DL360 Gen10 Servers.

  2.

  Each Server will have 6 x 10G SFP+ Ports.

  3.

  Each Server will have a dedicated iLO port.

  4.

  The customer requires that only two switches be used.

  5.

  The customer requires separate control planes. Which switch configuration can meet these requirements?

  A. 2 HPE 5945 Series switch with IRF

  B. 2 Aruba 8325 Series switches with VSX

  C. 2 HPE 5945 Series switches standalone

  D. 2 Aruba 8325 Series switches with backplane stacking.

  Correct Answer: C