HP HP Certifications HPE6-A44 Questions & Answers

• Question 11:

  What must the administrator configure on AirWare to monitor and run operational commands on the Aruba Mobility Masters (MMs) and Mobility Controllers (MCs)?

  A. PAPI and SSH/telnet

  B. PAPI and SNMP

  C. SNMP and HTTPS

  D. SNMP and SSH/telnet

  Correct Answer: D

  Reference: https://www.scribd.com/document/251777794/Airwave-and-Aruba-Best-Practices-Guide

• Question 12:

  An administrator enables AP load balancing for a cluster of Mobility Controllers (MCs). APs connected to the cluster have an LMS IP address configured in their AP Group configuration. No other parameters are changed in the cluster.

  If the two load AP thresholds are reached, what occurs?

  A. The APs are rebalanced across the cluster.

  B. The APs always stay connected to the LMS IP address configured in the AP Group profile.

  C. The users are rebalanced across the cluster.

  D. The users and APs are rebalanced across the cluster.

  Correct Answer: A

  Reference: https://www.arubanetworks.com/techdocs/ArubaOS_81_Web_Help/Content/ ArubaFrameStyles/Cluster/Load%20Balancing.htm

• Question 13:

  Which forwarding mode is used for a WLAN if a RAP needs to decrypt all user traffic and forward it locally?

  A. Split-tunnel

  B. Bridge

  C. Tunnel

  D. Decrypt-tunnel

  Correct Answer: D

• Question 14:

  Refer to the exhibit.

  

  What is true about the operation of the Aruba Mobility Controller (MC) shown in the exhibit?

  A. The Mobility master is in disaster recovery mode and will push changes to a Managed Controller.

  B. The disaster recovery mode is enabled, and no changes will be forwarded to the Mobility Master.

  C. The disaster recovery mode is disabled, and changes will be sent to the Mobility Master.

  D. The disaster recovery mode is enabled, and changes will be sent to the Mobility Master.

  Correct Answer: D

• Question 15:

  An administrator implements a cluster of four Aruba Mobility Controllers (MCs) managed by a Mobility Master (MM). An AP Group is configured with two VAPs and deployed to an AP that will connect to the cluster. Each AP contains two radios.

  How many GRE tunnels will be built from the AP to the Active AP Anchor Controller (A-AAC)?

  A. 2

  B. 4

  C. 5

  D. 8

  Correct Answer: A

• Question 16:

  An administrator supports an Aruba wireless network. The administrator configures as AAA profile referenced in a WLAN profile, where:

  The initial role assigned in the AAA profile is logon

  The MAC authentication default role is guest

  The 802.1X authentication role is authenticated

  ClearPass is used to verify the 802.1X user credentials. A user authenticates and is assigned the authenticated default role instead of the role assigned in the ClearPass server configuration.

  What must the administrator do so that the ClearPass role is assigned to the user?

  A. Select the Server-derived roles User Role in the AAA profile.

  B. Verify the role exists on the controller.

  C. Create the Download Role from CPPM User Rule.

  D. Select the Server-derived roles in the Server Group section.

  Correct Answer: D

• Question 17:

  An administrator wants to use AirWave to manage the configuration policy settings of a set of ArubaOS-Switches. Where should the administrator perform this action?

  A. in Groups

  B. in Device Setup

  C. in APs/Devices

  D. in AMP Setup

  Correct Answer: D

• Question 18:

  An administrator wants to dynamically upgrade AppRF on Aruba Mobility Controllers (MC) in a cluster. The administrator does not want to reboot the system at the time of the upgrade.

  What should the administrator use for this upgrade?

  A. Aruba image

  B. Upgrade Profiles

  C. Loadable Service Module (LSM)

  D. Cluster Upgrade Manager

  Correct Answer: A

• Question 19:

  An administrator implements blacklisting of users that fail authentication functions three or more times. By default, how long will these users have to wait before they can successfully log into the network again?

  A. 15 minutes

  B. 1 hour

  C. 4 hour

  D. 24 hours

  Correct Answer: D

• Question 20:

  An administrator creates a user role that department A in a company uses. Various other roles exist for other departments. All employees connect to the same ESSID, which authenticates to an external AAA server. How should the administrator configure to assign the appropriate roles to the employees?

  A. implement default roles

  B. implement server-derived roles

  C. implement user roles

  D. implement AAA profile roles

  Correct Answer: C