HP HP Certifications HPE6-A72 Questions & Answers

• Question 41:

  What is an available command on an Aruba AOS-CX switch that would back up the secondary image to a secure remote repository?

  A. backup secondary sftp://[email protected]/GL.10.04.0003.swi

  B. copy secondary sftp://[email protected]/GL.10.04.0003.swi

  C. copy sftp://[email protected]/GL.10.04.0003.swi secondary

  D. copy secondary tftp://[email protected]/GL.10.04.0003.swi

  Correct Answer: B

• Question 42:

  Refer to the exhibit.

  

  Traffic is failing between Core-1 and Host-B. IP addressing has correctly been applied, and all interfaces are attached to the vrf GREEN.

  Which configuration will correct the issue?

  A. Core-2(config)# ip route 0.0.0.0/0 10.1.1.1 vrf GREEN Host-B: assign the default-gateway address 10.1.20.181

  B. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN Host-B: assign the default-gateway address 10.1.20.181

  C. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN Host-B: assign the default-gateway address 10.1.20.1

  D. Host-B: assign the default-gateway address 10.1.20.181

  Correct Answer: B

• Question 43:

  Interface 1/1/1 is up Admin state is up Link transitions: 1 Description: TO_PC-1 Hardware: Ethernet, MAC Address: 00:11:22:33:44:55 MTU 1500 Type 1GbT Full-duplex qos trust none Speed 1000 Mb/s Auto-negotiation is on Flow-control: off Error-control: off MDI mode: MDIX VLAN Mode: access Access VLAN: 1111

  Which command will produce the above output?

  A. show interface vlan 1111

  B. show interface 1/1/1

  C. show interface gigabit 1/1/1

  D. show vlan 1111

  Correct Answer: B

• Question 44:

  Which two port characteristics must match between LAG interfaces? (Choose two.)

  A. Port number

  B. Duplex

  C. Member ID

  D. Media type

  E. Chassis number

  Correct Answer: BD

• Question 45:

  The customer has 778 developers testing computer games on the network.

  Which two actions resolve Broadcast storms? (Choose two.)

  A. Manually disable the redundant link to immediately resolve the impacted portion of the network.

  B. Utilize Spanning Tree to dynamically disable all redundant links in a segment.

  C. Setting switch ports to half-duplex will resolve Broadcast storms using Carrier Sense Multiple-Access Collision Detection (CSMA/CD).

  D. Enable single Area Open Shortest Path First (OSPF) on all Layer 2 switches, but do not enable routing.

  E. Utilize Spanning Tree to dynamically block Designated ports in addition to Alternate ports.

  Correct Answer: AB

• Question 46:

  Which two statements are true regarding Checkpoints on Aruba switches? (Choose two.)

  A. Rolling back to a prior checkpoint triggers a reboot of the switch.

  B. Stacking switches using VSF or VSX will disable the Checkpoint feature.

  C. A checkpoint is a snapshot of the running-configuration and relevant metadata at the time the checkpoint was created.

  D. System-generated checkpoints are created after a configuration change and 5 minutes of inactivity.

  E. Checkpoints are available on AOS 5400R switches, as well as on all AOS-CX switches.

  Correct Answer: CE

• Question 47:

  What is the process where a compute device converts logical data bits into the correct physical representation depending on the media?

  A. Demodulation

  B. Modulation

  C. Propagation

  D. Encapsulation

  Correct Answer: D

• Question 48:

  Which command will suppress LLDP messages from egressing on a given port while still allowing LLDP to be enabled on the switch?

  A. switch(config-if)# no lldp interface (port) transmit

  B. switch(config-if)# no lldp transmit

  C. switch(config-if)# no lldp receive

  D. switch(config)# no lldp

  Correct Answer: B

• Question 49:

  Refer to the exhibit.

  

  LLDP

  The command show LLDP neighbor-info gets typed into Access-1. All switches are Aruba OS-CX switches.

  What is the output of this command?

  

  A. Option A

  B. Option B

  C. Option C

  D. Option D

  Correct Answer: D

• Question 50:

  Refer to the exhibit.

  

  Which command produces the above output?

  A. show interface port 1/1/10 trunk

  B. show vlan port 1/1/10

  C. show trunk port 1/1/10 extended

  D. show interface port 1/1/10 switchport

  Correct Answer: C