HP HP Certifications HPE6-A80 Questions & Answers

• Question 31:

  A customer has an existing Aruba wireless solution at their campus. This solution is shown in the exhibit.

  The customer now wants to enhance seamless roaming and failover across the solution. The customer wants the least expensive solution that still meets the needs.

  Which figure shows the correct changes to the solution to meet the new needs?

  

  A. Option A

  B. Option B

  C. Option C

  D. Option D

  Correct Answer: A

• Question 32:

  Refer to the exhibit.

  

  A customer requires a core switching solution for a very large multi-building campus with about 30;ooo wireless clients and devices. The network will have a flat topology as shown in the exhibit, and MCs will forward all wireless traffic to the

  core for routing.

  The customer had considered Aruba 5400R Series switches, but the architect recommends Aruba S320 switches Instead.

  How should the architect justify this recommendation?

  A. The 8320 switches are required to eliminate the aggregation layer as the customer desires.

  B. The 3320 switches offer more extensive mobility integration features with Aruba MCs and APs than the 54C0R Series switches do.

  C. The 3320 switches support a higher density of 10GbE fiber ports than the 5400R Series.

  D. The 8320 switches have greater performance and larger ARP tables than the 54Q0R Series, as is necessary for a network this size.

  Correct Answer: B

• Question 33:

  A retail customer is doing a wired and a wireless refresh with Arut>a CX switches and S02.11ax APs. Currently, trey nave wireless Point of Sales (PoS) systems and would like to assure that the proposed deployment solution will comply with the Payment Card Industry (PCI) Data Security Standard (DSS) requirements. The architect have proposed the following deployment solutions regarding PCI DSS requirements' -IDS/IPS -Aruba APs in hybrid mode as well as in dedicated AMs mode -Strong authentication and encryption for wireless -Built-in firewall and role-based access controls to segment WLAN Which other requirements must you include in the existing deployment solution? (Select two.)

  A. Select the FIPS/TAA-compliant version for the Access Points.

  B. Suggest MACSet between the Aruba CX switches that encrypt all traffic over the link.

  C. Switch high-availability solution VSF and VSX also can encrypt all traffic on their switch links.

  D. Aruba Central or Aruba AirWave to generate a scheduled compliance reporting.

  E. Role-based access controls for wired users using ClearPass. Optionally ; tunneled-node to MCs.

  Correct Answer: DE

• Question 34:

  Refer to the exhibit.

  

  A customer needs a wired upgrade for a building on its main campus. The exhibit shows the switches that the architect has selected for each closet and me existing cabling. The customer is not open to changing the cabling.

  The customer requires link redundancy for the uplinks from each closet and for the links from the building to the core. In non link failure situations, the uplinks from each closet must support at least 20Gbps, and the building as a whole must have at least 20 Gbps to the core in non link failure situations Which two options Tor connecting the closets to the network core are valid? (select two.)

  A. Connect me Floor 2 switch stack to Floor 1 with two fiber connections, DO me same for Floor 3. connect the Floor 1 switch stack to the network cone with two fiber connections.

  B. Connect the switch stack on each floor directly to the network cone on two "fiber connections per floor. Achieve this by patching the inter-floor fiber through to the inter- building fiber.

  C. Combine the nine switches on the three floors into a single switch stack with the MM QM3 fiber cables in a ring topology. Connect two Floor 1 members to the network core with one fiber connection each.

  D. Combine the nine switches on all three floors into a single switch slack with stacking cables in a ring topology. Connect two Floor f members to the network core with one fiber connection each

  E. Add two aggregation switches in the Floor 1closet. Connect the switch stack for each closet to the aggregation switches on two fiber links each and the aggregation switches to the core on two fiber links.

  Correct Answer: BE

• Question 35:

  Refer to the exhibit.

  

  The exhibit shows the current AP deployment In a warehouse that stores frozen food goods:

  *

  APs are mounted on the ceiling, which is 15 feet (4.6 m) high.

  *

  Shelves are 12 feet (3.7 m) high and are typically fully stocked.

  This customer indicates that their current wireless performance is inadequate.

  What should the network architect include in the new solution to resolve this issue?

  A.

  APS deployed on the ceiling in the same current locations, out with dual 5GHz radios

  B.

  APs deployed on the ceiling in each aisle, due to the high absorption between aisles

  C.

  APs deployed with directional antennas on the ceiling, due to the high 15-foot callings

  D.

  APs deployed with directional antennas and a hybrid wall-mount, ceiling-mount design

  Correct Answer: B

• Question 36:

  Refer to the exhibit.

  

  The exhibit shows the topology for a new Aruba solution. The MCs are in a ctuster and support all of the wireless traffic in

  the network The core switches route all traffic and support all VLANS. The access fayer switches do NOT use tunneiednode. or dynamic segmentation.

  The customer has indicated that it has these VLANS for user devices.

  *

  VLAN 11 for Floori employee wired devices

  *

  VLAN 12 for Floor 2 employee wired devices

  *

  VLAN 13 tor Floor 3 employee wired devices

  *

  VLAN 14 for Floor 4 employee wired devices

  *

  VLAN 15 for Floor 5 employee wired devices

  *

  VLAN 101 for all employee wireless devices

  *

  VLAN 102 for all guest wireless devices

  In which locations should the architect plan the VLANs?

  A.

  VLANs 11-15 on one MC. VLANs 101 and 102 on the other MC. (Other VLANs will be used on the access layer switches.)

  B.

  VLANs 11-15. 101. and 102 on both MCs. (Other VLANs will be used on the access layer switches.)

  C.

  VLANs 11-15 on the access layer switches on the corresponding floor; VLAN 101 on one MC and VLAN 102 on me other MC

  D.

  VLANS 11-15 on the access layer switches on the corresponding floor; VLANS 101 and 102 on both MCS.

  Correct Answer: C

• Question 37:

  A customer has a large network, which includes a main site and many branch sites. The network has a total of about 10.000 wireless devices at the main site and 15,000 wireless devices total at branches. To fulfill the requirements for a wireless network upgrade, the architect plans to propose;

  *

  2 7205 MCs at the main site

  *

  2 7210 MCs at the main site

  *

  10 7030 MCs at branch sites

  *

  200 RAPs at branch sites

  *

  500 CAPS at the main site

  *

  300 CAPS at branch sites

  What is the most cost-effective Mobility Master solution that meets the requirements'?

  A.

  MM-HW-5K appliance

  B.

  MM-HW-5K appliance + MM-HW-5k appliance

  C.

  MM-HW-1K appliance

  D.

  MM-HW-1OK appliance

  Correct Answer: B

• Question 38:

  A customer has multiple, very small branch sites that require just one or two APs each. The office has a local Internet connection, but all of the traffic is destined To the corporate data center, which has an Aruba wireless solution. Which branch office solution best meets the customer needs?

  A. RAPs and no branch office controllers

  B. IAPs and 7005 branch office controllers with an 3D-WAN license

  C. CAPS and 7005 branch office controllers

  D. RAPs and 7005 branch office controllers with an. SD-WAN license

  Correct Answer: C

• Question 39:

  A customer has critical wired endpoints. However, each endpointhas a single Ethernet connection to the network. Thecustomer wants redundancy in the switch access layer to minimize the chances that an endpoint will lose this connection.

  The architect plans to deploy two Aruba CX 6405 switches in the closet.

  Which plan provides the greatest redundancy for this scenario?

  A. The 6405 Switches are in a VSF fabric, so the individual switches do not need redundant components.

  B. The 6405 switches are in a VSX fabric, and each has a redundant management module but not a redundant power supply.

  C. The 6405 switches are not in a vsF fabric, and have redundant power supplies but not redundant management modules.

  D. The 6405 switches are not in a VSX fabric, and have redundant power supplies and redundant management modules.

  Correct Answer: B

• Question 40:

  Which scenario Indicates the need for a wireless mesh?

  A. A nsstorical building has some wired areas and a few areas with no wired or wireless connectivity, walls and ceilings have asbestos. The company needs wireless access across the site.

  B. A hospital needs to provide high availability for wireless services in certain areas which support very critical wireless medical devices. Devices must always be in range of at least two APs.

  C. A company has a small branch office with just one RAP. The company has noticed that performance is poor in some areas of the network and wants to add another AP.

  D. A company needs to provide seamless roaming and wireless access between two buildings. The buildings are about 60 feet (18 m)apart.

  Correct Answer: D