HP HP Certifications HPE6-A80 Questions & Answers

• Question 41:

  Refer to the exhibit.

  

  A museum wants to add full S02.11ax wireless coverage across the building, which is about 210 feet (64 m) by 330 feet (100 m). The museum has 15-foot (4.6 m) ceilings and stone interior walls. The network needs to support up to 600

  wireless guest devices

  The exhibit also shows a preliminary plan tor AP locations, me museum has eight Ethernet drops in the lobby and girt stop, but has otherwise not been wired.

  What is one recommendation that the architect should make to ensure a successful deployment?

  A. Add about 10 APs to achieve adequate density

  B. Use directional antennas to avoid lost signal.

  C. Use at least CATS cable to connect to the APs.

  D. Add a wiring closet closer to the north side.

  Correct Answer: D

• Question 42:

  For which scenario do Aruba CX 6300M Series switches meet the needs for an upgrade of the wired access layer while the Aruba CX 630QF Series switches do not?

  A. The customer wants to utilize the Aruba AP-515 support for 002 3bz connectivity.

  B. The customer wants to utilize LACP on AP515 in VSF switch configuration.

  C. The Aruba CX6300M supports 10GBase-T connectivity with AP-515.

  D. The Aruba CX 630DM support up to 75W PoE+ per port

  Correct Answer: D

• Question 43:

  A company already has an Aruba wireless network The network currently consists of: * oneMM-HW-1k

  *

  two 7210 MCs in the network core

  *

  two 721GMCsintheDMZ

  *

  200 AP-515S in Building 1 and Building 5

  100 AP-515S each In Building 2r Building 3, and Building 4

  The customer now wants to assess if it needs local Mobility controllers (MC) for any buildings:

  - Building 1 is the main office building for the campus. It supports the highest number of APs. It connects to the network core without an aggregation layer.

  *

  Building 2 is further away from the Building i. and no roaming is provided between it and the other buildings its access layer connects to the network cone with a pair of Aruba CX 6300M aggregation switches.

  *

  Building 3 is further away from the other buildings, it connects to the network core without an aggregation layer.

  The Guest SSID traffic should be tunnelled to the DMZ controllers

  ' Building 4 has its own local datacenter and Internet connection. The company would like it to be able to operate completely autonomously if its aggregation layer loses connectivity with the core.

  *

  Building 5 is further away from the other buildings, it connects to the network core without an aggregation layer.

  This building has been assigned to a partner that would like to manage a dedicated SS1D using the shared AP infrastructure.

  In which two buildings should the network architect plan local mobility controllers (MCs)? (Select two)

  A.

  Building 1

  B.

  Building 4

  C.

  Building 5

  D.

  Building 3

  E.

  Building 2

  Correct Answer: AD

• Question 44:

  Refer to the exhibit.

  

  A customer needs a wireless network upgrade and has these requirements.

  -

  Support any applications used on a wired connection

  -

  Support up to 2500 wireless clients

  - Support seamless roaming from floor to floor and building to building

  -

  Continue to function seamlessly if one controller fails The architect has designed the logical infrastructure for the network as shown in the exhibit Which change should the architect make to belter meet customer requirements and besl practices?

  A.

  Combine me /25 subnets for wireless and wired users into a /16 subnet.

  B.

  Install additional Mobility Controller.

  C.

  Combine the /25 subnets for wireless users into a /20 subnet

  D.

  Place each controller in a different VLAN and subnet.

  Correct Answer: B

• Question 45:

  Refer to the exhibit.

  A customer has an existing network with ArubaOS switches, Aruba 7205 controller, and 802.11ac APs. The customer needs a wired upgrade for their campus network and wireless upgrade with 802,11ax APs and would like to get all the

  functions of AP.

  The customer has one building with 3 floors with the following wired devices,

  *

  8 printers

  *

  security cameras

  The architect plans to propose 75 AP-535s.

  The security cameras are a high definition pan-tilt-zoom with heaters for harsh environments that require more than 45 W to function,

  Which exhibit shows an access switch mat meets the customer needs?

  A.

  Option A

  B.

  Option B

  C.

  Option C

  D.

  Option D

  Correct Answer: D

  

  *

  200 VOIP phones

• Question 46:

  What is one customer requirement that can drive the need for a relatively dense AP deployment. In which ire coverage areas of at least three AP radios overlap?

  A. AP operation as hybrid AMs for IDS/WIPS

  B. the deployment of dual SGHz radio APs

  C. support for beacon management

  D. location tracking of wireless loT devices

  Correct Answer: C

• Question 47:

  Referto the exhibit.

  

  A hospital needs an upgrade to 802.1tax for its wireless network. The wireless network supports:

  *

  wireless medical devices

  *

  medical staff voice communicators

  *

  laptops in nurse stations

  *

  medical staff tablets

  *

  visitor and patient personal devices.

  All of these devices support both the 2 4GHz and 5GH2 band. Assuming about a max throughput on50 Mbps per AP; the hospital would like. The architect has used VisualRF to plan the AP placement on one of the floors, which the hospital

  expects will need to suppod about 800 win

  to deploy APS in stairwells between floors.

  How well does the plan meet the requirements?

  A. The current AP placement meets coverage requirements, but does not meet capacity requirements.

  B. The current AP placement meets the customer requirements in terms of coverage and capacity.

  C. The current AP placement fails to account for the lead-lined wails that are common in patient and exam rooms.

  D. The current AP placement fails to provide adequate signal for the voice communicators in several areas

  Correct Answer: C

• Question 48:

  An archinect needs lo plan a Mobility Master (MM) solution for a customer Requirements include:

  *

  redundancy for the MM

  *

  redundancy for the MCS (seamless failover if up to one fails)

  The wireless network consists of

  *

  total APs - 300

  *

  total wireless devices = 20,000

  *

  total MCs = 10

  The customer wants the most cost-effective plan that meets me requirements.

  Which plan for MMs should the architect select?

  A.

  1 MM-HW-5K and 1 MM-VA-1K

  B.

  2 MM-HW-5K

  C.

  1 MM-HW-5K and 1 MM-HW-1K

  D.

  2 MM-HW-1QK

  Correct Answer: D

• Question 49:

  Refer to the exhibit.

  

  A customer needs to create a proposal for a full wireless solution for a customer The customer has indicated that the MCs will connect to Aruanda CX Switches at the core and the APs will connect to PoE-i- switches at the edge. The customer requires that the wireless solution support at least 50 Mbps concurrently per AP. The architect has created a BOM tor a Mobility Master (MM), two MC 721os, and 400 AP-535S. me exhibit snows this BOM.

  Which components has the architect forgotten?

  A. SFP+ transceivers tor the MC connections

  B. Smart Rate PoE+ injectors for the APs

  C. Mounting Kits tor the MOs and MM

  D. Sufficient Enterprise licenses for the APs on both MCs

  Correct Answer: C

• Question 50:

  Refer to the exhibit.

  

  A stadium wants to deploy location-based services, including blue-dot wayfinding over a 200.000 square root (isr580 sq. m) area. The custom past particular areas. The customer has selected a 1 year subscription.

  The exhibit shows the BOM that the architect created in iris.

  Which correction should the architect make?

  A. Change the campaign subscription to a Maps subscription.

  B. Add two Maps subscriptions.

  C. Add another campaign subscription.

  D. Remove one Blue Dot Nav subscription.

  Correct Answer: A