NetApp NetApp Certifications NS0-182 Questions & Answers

• Question 141:

  Your customer wants to buy four new DS212C shelves with an 8 TB SATA drive. The customer also wants to know the usable aggregate size of this configuration.

  In this scenario, which resource would you use to accomplish this task?

  A. Fusion

  B. Hardware Universe (HWU)

  C. Interoperability Matrix Tool (IMT)

  D. Config Advisor

  Correct Answer: B

• Question 142:

  

  You just installed two nodes into an existing ONTAP cluster. When running date on the CLI you notice that

  the cluster1-03 node is running behind time. You confirmed that you can reach the node management LIF

  of each node.

  Referring to the exhibit, which statement is true?

  A. The node-management LIF has to be on e0M for NTP to work.

  B. The DNS is not configured for this node.

  C. The NTP is adjusting in small increments.

  D. No NTP server is configured for this node.

  Correct Answer: B

• Question 143:

  You install a new 2-node FAS8200 switchless cluster. You want to reach all necessary management LIFs and SPs for this cluster.

  How many management IP addresses do you need in this scenario?

  A. 1

  B. 2

  C. 5

  D. 4

  Correct Answer: C

• Question 144:

  You are going to add a node to an existing cluster but first you must gather the appropriate information for the new node's management LIF.

  What two pieces of information is required to accomplish this task? (Choose two.)

  A. IP address

  B. NTP server address

  C. Service Processor Information

  D. default gateway

  Correct Answer: AD

• Question 145:

  Starting with ONTAP 9.5, what is the maximum number of HA pairs that are supported when using a SAN cluster?

  A. 4

  B. 2

  C. 6

  D. 8

  Correct Answer: A

• Question 146:

  A customer is settings up a new cluster. The customer notices that there are many management ports on the cluster. The customer is know the purpose of the node management network LIF.

  What do you tell customer in this scenario?

  A. The node management LIF provides multiple IP address for managing a particular node in the cluster at the hardware level and is used for system maintenance.

  B. The node management LIF is associated with a storage virtual machine (SVM) and is used for communicating with client.

  C. The node management LIF provides a dedicated IP address for the entire cluster and can fail over to any node management or data port in the cluster.

  D. The node management LIF provides a dedicated a IP address to managing a particular node in the cluster and is used for system maintenance.

  Correct Answer: D

• Question 147:

  You install a new AFF A300 2-node switchless cluster with ONTAP 9.5 at a customer site. Each node has a root aggregate as part of the system configuration.

  In this scenario, what is the default disk partitioning called?

  A. root-data-data partitioning

  B. data-data partitioning

  C. root-data partitioning

  D. root-data-root partitioning

  Correct Answer: C

• Question 148:

  You are installing a new 2-node AFF A220 cluster running ONTAP 9.5. The customer would like to use the UTA2 adapters from the first controller to connect to the 10GbE front-end switches. On the second controller, they would like to use the first UTA2 port as a target FC port, and the second as an FC initiator.

  In this scenario, according to NetApp Best practices, what should your customer do?

  A. Change all the UTA2 ports from CNA mode to FC mode.

  B. Change all the UTA2 ports to CNA to support both FC and Ethernet.

  C. Change the first two ports of each controller to FC and the last two to CNA.

  D. Change the UTA2 ports from CNA mode to FC mode on the first controller.

  Correct Answer: C

• Question 149:

  You finished a new installation and executed Config Advisor successfully. You review the physical racking and cabling on one of the controllers, and notice an amber light that was not previously on.

  Which two actions should you perform before you turn over the cluster for production? (Choose two.)

  A. Remove cables connected to the controller until you find the one responsible for the controller issue.

  B. Review AutoSupport messages which could explain the controller state.

  C. Execute Config Advisor again to check for new errors.

  D. Let the customer know the cluster is operating normally while the amber LED is on.

  Correct Answer: AC

• Question 150:

  A customer has a standard request for information regarding the installation, configuration, usage, and maintenance of his NetApp equipment.

  What is the appropriate priority level to use when he opens a case?

  A. P2

  B. P1

  C. P4

  D. P3

  Correct Answer: C