Ann, a home user, brings a Windows XP PC in for repair and reports that several disk read errors are occurring. She has run check disk and errors have been reported several times. Which of the following should a technician recommend? (Select TWO).
A. Increase the amount of RAM to improve disk checks
B. Backup all data on the drive
C. Upgrade to a home server
D. Purchase a new hard drive
E. Change the drive configuration to RAID 0
F. Upgrade to Windows 7 Professional
Ann recently upgraded a computer from Windows XP to Windows 7, but one of her applications does not work now. Which of the following should be done FIRST?
A. Set the application to run in XP compatibility mode
B. Reinstall Windows XP
C. Configure a dual boot with XP and 7
D. Install the application in XP mode
A user, Ann, receives a call from Joe who states that he is brand new in the help desk. Joe states that he needs to update Ann's email client to prevent corruption. At Joe's request, Ann discloses her user name and password. She later discovers that Joe is not a member of the help desk. Which of the following has occurred?
A. Social engineering
B. Phishing
C. Spear phishing
D. Hijacking
A PC uses RAID 1. Ann, a technician, has read in the event log that the drive "SATA 1" is no longer in sync with drive "SATA 0". Which of the following steps should she try FIRST to repair this PC to optimal running conditions?
A. Remove SATA 1 from the RAID group then try to re-add it
B. Replace both drives then restore from a backup
C. Remove both drives then switch the SATA channels
D. Replace SATA 1, rebuild the RAID and replace SATA 0
A user, Joe, has just finished upgrading his computer with a wireless keyboard/mouse combination, additional memory, installed new speakers, and replaced his 15 inch flat screen with a 24 inch flat screen.
When he boots the computer it immediately starts making a loud beeping noise and will go no further in the boot process.
Which of Joe's system upgrades is the cause of the problem?
A. The DVI cable is not properly seated
B. Speakers are not properly connected
C. Battery low on wireless mouse
D. Memory is mismatched
A user, Ann, reports that her laptop will no longer connect to wireless. Joe, a technician, checks the device manager and does not see a wireless networking card or any unknown devices. Which of the following should Joe do FIRST?
A. Check to make sure the wireless card was not turned off via the hardware switch or keyboard shortcut.
B. Install a USB wireless card to ensure that Windows networking is working properly.
C. Open the laptop and reseat the network card and both antennas.
D. Download and install the latest wireless driver from the manufacturer's website.
Ann reports that printouts from the department laser printer have become faded. She has already replaced the toner cartridge. Which of the following is the MOST likely component causing the faded printing?
A. Transfer roller
B. Fusing assembly
C. Registration assembly
D. Duplexing assembly
A user, Ann, reports that her computer is able to connect to devices on her local network but not on the remote office network. Ann's computer shows the following ipconfig information: IP address: 192.168.10.45 Subnetmask: 255.255.255.0 Gateway: 192.168.11.1 DNS server 1: 192.168.10.2 DNS server 2: 8.8.8.8
Which of the following is the cause of the problem?
A. DNS server 2 is set incorrectly.
B. DNS server 1 is set incorrectly.
C. IP address is set incorrectly.
D. Gateway is set incorrectly.
A technician is tasked with repairing a Windows 7 system including the removal of recently installed files and software. Which of the following system restoration methods would be the LEAST destructive way to achieve this?
A. System Restore
B. System Image Recovery
C. CHKDSK
D. Windows Memory Diagnostic
Ann, a technician, is trying to recover some files for a user from a damaged laptop. Since the Windows installation has been corrupted and does not boot, Ann plugs the drive into a bench system to attempt a recovery. After trying to access the drive on the bench computer, the following message is displayed. "Access Denied. Please Enter Encryption Password." Which of the following is the reason that this error is displayed?
A. The hard drive is experiencing S.M.A.R.T. failure errors
B. The TPM security chip inside the bench system is not enabled
C. The BIOS of the bench system is out of date
D. BitLocker is being used
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only CompTIA exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 220-802 exam preparations and CompTIA certification application, do not hesitate to visit our Vcedump.com to find your solutions here.