Cisco CCNP Data Center 350-601 Questions & Answers

• Question 161:

  A new employee must be granted access to add VLANs into an existing Cisco UCS Manager and configure NTP synchronization with date and time zone settings. Which two privileges must be granted to the employee to complete the task? (Choose two.)

  A. Service Profile Compute (Is-compute)

  B. Ext LAN Config (ext-lan-security)

  C. Service Profile Network Policy (Is-network-policy)

  D. Service Profile Config (Is-config)

  E. Ext LAN Policy (ext-lan-policy)

  Correct Answer: BE

  https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/Reference-Docs/Privileges/4- 1/b-UCSM-Privileges-4_1.pdf

  NTP can be configured only with EXT LAN Security. VLAN can be added using the following privileges:

  -

  Ext Lan Config (ext-lan-config)

  -

  Ext Lan Policy (ext-lan-policy)

  service profiles will add VLANs to vNICs only if they are configured to UCS manager. So service profile is not valid solution.

• Question 162:

  An engineer must build a lab replica of a Cisco UCS production environment. The file must be imported into a new Cisco UCS cluster using a Cisco UCS manager GUI. The file must be in XML format and be exported from Cisco UCS Manager using encrypted method.

  Which two configuration parameters should be selected to meet these requirements?. (Choose two.)

  A. Type: Logical configuration

  B. Protocol SCP

  C. Type Full state

  D. Protocol TFTP

  E. Type All configuration

  Correct Answer: BE

• Question 163:

  An engineer must connect a Cisco UCS appliance port directly to NFS and iSCSI storage devices. Which action should be taken to achieve this goal?

  A. Configure NFS and iSCSI to use the same VLAN tag on the appliance port

  B. Configure the appliance ports in access mode and apply VLAN tagging on the storage

  C. Configure the appliance ports in trunk mode and apply VLAN tagging on the storage

  D. Configure VLAN tagging on the storage and the Cisco UCS simultaneously

  Correct Answer: C

• Question 164:

  An engineer needs to implement a solution that will provide telemetry of MDS 9000 switches in a SAN fabric. The solution should use Cisco Data Center Network Manager (DCNIM) with SAN insights feature. Which three steps are required to deploy the solution? (Choose Three.)

  A. Activate ENTERPRISE_PKG license on target switches.

  B. Select a target Fabric to be monitored.

  C. Select the target ports to be monitored for telemetry data.

  D. Select a target VSAN to be monitored.

  E. Activate SAN_ANALYTICS_PKG license on target switches.

  F. Configure name resolution between the devices.

  Correct Answer: BCE

• Question 165:

  Refer to the exhibit.

  

  An engineer is connecting a Cisco MDS 9700 Series Multilayer Director to a downstream Cisco Nexus 5672UP switch. Which command set must be used to complete the configuration?

  

  A. Option A

  B. Option B

  C. Option C

  D. Option D

  Correct Answer: A

• Question 166:

  An engineer must configure multiple EPGs on a single access port in a large Cisco ACI fabric without using VMM integration. The relevant access policies and tenant policies have been created. A single AAEP is used to configure the access port in the fabric. Which two additional steps must be taken to complete the configuration? (Choose two.)

  A. A contract must be defined between the EPGs

  B. The EPGs must be linked to the correct physical domain

  C. The EPGs must link directly to the corresponding AAEP

  D. The corresponding bridge domains must be configured in legacy mode

  E. The EPGs must be configured as static ports

  Correct Answer: BE

• Question 167:

  Which two actions should be performed before upgrading the infrastructure and firmware of multiple UCS blades? (Choose two)

  A. Verify if the bootflash on the fabric interconnects in the Cisco UCS has at least 15% available space

  B. Enable Smart Call Home feature during the firmware upgrade process

  C. Verify if the bootflash on the fabric interconnects in the Cisco UCS has at least 10% available space

  D. Run the Check Conformance feature to verify that all your components are running the compatible firmware version after the upgrade

  E. Get Full State and All Configuration backup files before beginning the upgrade

  Correct Answer: DE

• Question 168:

  An engineer must suggest a deployment model for a newly developed application. The engineer has a small starting budget and lacks technical knowledge and infrastructure to implement store, operating system and database services to

  support the application deployment. The engineer also needs usage data related to the service and the ability to elastically scale the deployment as customer demands grow.

  Which two models must be used to meet the requirements? (Choose two)

  A. infrastructure as a service

  B. private cloud

  C. public cloud

  D. software as a service

  E. platform as a service

  Correct Answer: CE

  "a newly developed application" They developed the application.

• Question 169:

  An engineer configures a storage environment for a customer with high-security standards. The secure environment is configured in vsan 50. The customer wants to maintain a configuration and active databases and prevent unauthorized switches from joining the fabric. Additionally, the switches must prevent rogue devices from connecting to their ports by automatically learning the WWPNs of the ports connected to them for the first time. Which two configuration sets must be used to meet these requirements? (Chose two.)

  A. fcsp enable fcsp auto-active

  B. port-security enable port-security activate vsan 50

  C. clear fabric-binding activate vsan 50 fabric-binding activate vsan 50

  D. fcsp dhchap hash md5 sha1

  E. fabric-binding activate vsan 50 force

  Correct Answer: BE

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/7_3/configuration/security/security/binding.html

• Question 170:

  An engineer is implementing a Cisco UCS system with directly connected Fibre channel storage array. Which two actions should be taken to accomplish this task? (Choose two.)

  A. Create a new vHBA that is dedicated to the array

  B. Configure the Fibre Channel port as a Fibre channel storage port

  C. Configure a storage connection policy

  D. Configure a new VSAN

  E. Configure a Fibre Channel port channel

  Correct Answer: BD