HP HP Certifications HPE0-J50 Questions & Answers

• Question 11:

  A storage integrator is implementing an HPE 3PAR StoreServ system and connecting several storage volumes to a customer's VMware farm. During the implementation, the customer reveals that their legacy backup solution for protecting virtual machines does not provide a satisfactory RTO (recovery time objective). A recent implementation of new StoreOnce appliances did not fully solve the problem.

  Which HPE solution could the integrator demonstrate to address the customers RTO concerns?

  A. HPE 3PAR StoreServ Management Console

  B. HPE Complete iTernity iCAS

  C. HPE 3PAR Integrated Management Console

  D. HPE Recovery Manager Central for VMware

  Correct Answer: D

  Reference: https://assets.ext.hpe.com/is/content/hpedam/documents/4aa5-5000-5999/4aa5-5864/4aa5-5864enw.pdf

• Question 12:

  

  A system administrator is investigating an issue on an HPE MSA connected to a server with a Windows 2008 R2 operating system. The customer is complaining that after deleting temporary files on the volume the available space does not increase.

  What is the possible cause of this problem?

  A. The Compact feature is not supported in this operating system.

  B. Volume needs to be converted to linear type.

  C. T10 UNMAP is not supported in this operating system.

  D. Housekeeping processes on the MSA are disabled.

  Correct Answer: C

• Question 13:

  Refer to the exhibit.

  

  An Integrator is configuring File Persona on a HPE 3PAR StoreServ 8440.

  What is a valid Netmask for the configuration shown?

  A. 172.27.97.61

  B. 172.20.0.0

  C. 255.255.255.0

  D. 255.255.252.0

  Correct Answer: C

• Question 14:

  A customer has the following components installed and running:

  -HPE 3PAR StoreServ 8400 with two nodes

  -three SFF drive shelves

  -FC-based host connections

  -a mixture of SSDs and SAS HDDs

  The task is to expand the solution with two nodes and another three SFF drive shelves, as well as SSDs and SAS HDDs.

  What must be checked at the customer site before beginning the installation?

  A. if there is space for the additional three SFF drive shelves adjacent to the existing drive shelves

  B. if there is space for the second node pair adjacent to the first node pair

  C. if there is the required number of High Density Active Optical Cables to connect the two node pairs

  D. if the license for enabling the second node pair is installed before starting the expansion

  Correct Answer: A

• Question 15:

  A storage integrator is installing an HPE MSA 2042 into a remote location as a part of warehouse automation solution. The site has no IT staff and warehouse employees will not be granted access to the location where the MSA will be installed. The customer is concerned about the inability to control individual AC power outlets connected to the MSA.

  Which HPE power delivery equipment can be added to the solution to address these requirements? (Choose two.)

  A. HPE G2 Metered and Switched PDU

  B. HPE Standard Series G2 Basic PDU

  C. HPE iPDU

  D. HPE G2 Metered PDU

  Correct Answer: CD

• Question 16:

  Refer to the exhibit.

  

  A storage integrator is deploying an HPE StoreOnce VSA.

  Which command can be used to find available storage capacity before it can be added in the StoreOnce console?

  A. hardware setup storage

  B. hardware run setup

  C. hardware discover storage

  D. hardware discover disks

  Correct Answer: C

  Reference: https://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c03822685-16.pdf

• Question 17:

  What factors does a storage integrator need to consider before implementing an Ethernet-based SAN?

  A. Data Center Bridging requires supported switches and NICs.

  B. Remote Direct Memory Access (RDMA) support is mandatory for all components.

  C. Data Center Bridging requires optical fiber cables.

  D. Remote Direct Memory Access (RDMA) requires optical fiber cables.

  Correct Answer: A

• Question 18:

  The system administrator created a volume on an HPE MSA 2042 storage solution. The storage administrator is complaining that the Storage Management Utility (SMU) displays allocated space, but there is no data on the disk yet and the volume is empty.

  How can the storage integrator fix the issue?

  A. Modify the volume and enable thin provisioning.

  B. Create a virtual disk group and new virtual volume.

  C. Modify the volume and convert it to virtual.

  D. Create a linear disk group and new linear volume.

  Correct Answer: B

• Question 19:

  

  An HPE StoreVirtual 3200 system consists of 19x 1.2 TB Drives in a RAID5 with a capacity level of 75%. The network is built with four HPE FlexFabric 5900 switches. The customer complained about performance challenges with the given configuration, and the administrator identified the drive configuration as a bottleneck. A performance analysis shows latencies above 60ms. Installation of the systems was done by best practices.

  Which actions should be performed to solve these issues? (Choose two.)

  A. Advise additional tiering licenses.

  B. Change RAID set to RAID 1 on both systems.

  C. Offer SSD drives for tiering purposes and a performance boost.

  D. Verify that a minimum of 4 RAID sets are built for optimal performance.

  E. Set the bonding policy to ALB on both systems.

  Correct Answer: CD

• Question 20:

  A storage integrator is handing over an installed HPE 3PAR storage system to a customer. The customer wants the original license key of the system for setlicense command that is used to prevent the system from prompting for confirmation of new license key.

  Which of the following command shows original license key?

  A. showlicense -raw

  B. displaylicense

  C. licshow

  D. licenseshow

  Correct Answer: A

  Reference: https://support.hpe.com/hpsc/doc/public/display?docId=c04204279