HP HP Certifications HPE0-J50 Questions & Answers

• Question 41:

  A customer currently utilizing HPE 3PAR StoreServ 7200 is experiencing performance bottlenecks within their SAN storage.

  Which cost-effective upsell or cross-sell HPE storage solution will offer significantly more performance and higher capacity to meet their needs and fit within their current infrastructure?

  A. HPE 3PAR StoreServ File Controller v3 System

  B. HPE 3PAR StoreServ 8440

  C. 8-node HPE 3PAR StoreServ 20000 Storage

  D. HPE StoreVirtual 3200 Storage

  Correct Answer: C

• Question 42:

  An integrator is validating a design for an HPE 3PAR StoreServ solution. The assessment document shows that there is structured cabling between the rack the array will be installed in and the racks with the SAN switches. The fiber segments between the racks are documented as being 50 micron OM2 and are terminated with SC connectors.

  What needs to be considered when validating this design?

  A. 3PAR arrays must be directly connected to SAN switches.

  B. The SC connectors must be replaced by LC connectors.

  C. OM2 Fiber cables are not supported for 8 Gbps.

  D. Fiber segments cannot mix OM2 and OM4 cables.

  Correct Answer: B

• Question 43:

  A storage integrator has installed HPE OneView for vCenter to integrate HPE MSA 1040 management from a vSphere Web Client. Which typical configuration task is required after the installation of HPE OneView for vCenter?

  A. license HPE OneView for VMware Storage Component

  B. register HPE OneView for vCenter to Storage Management Utility

  C. add HPE MSA Storage System to vCenter server

  D. add vCenter server to HPE OneView for vCenter

  Correct Answer: A

  Reference: https://support.hpe.com/hpsc/doc/public/display?docId=a00037524en_us

• Question 44:

  As a best practice, what should the Integrator do after finishing a storage solution installation?

  A. Remove and insert each hot swappable component one-by-one.

  B. Verify the used space in a rack.

  C. Test storage solution functionality under the operational temperature range.

  D. Verify the event logs are accumulating data.

  Correct Answer: C

• Question 45:

  Which management interface or tool primarily offers remote support capabilities for an HPE 3PAR StoreServ storage system?

  A. HPE 3PAR Service Processor

  B. HPE 3PAR Direct Connect

  C. HPE Insight Remote Support

  D. HPE Insight Online 3PAR

  Correct Answer: C

  Reference: https://www.hpe.com/emea_europe/en/services/get-connected.html

• Question 46:

  A storage integrator has connected a new Windows Server 2008 R2 host to an HPE 3PAR StoreServ array. After creating a new 3PAR Virtual Volume and exporting it to the new host, the Disk Management tool on the host is displaying two new drives.

  Which additional software should the technician install to consolidate the displayed drive?

  A. Storage Spaces

  B. Enhanced Storage

  C. File and Storage Services

  D. Multipath I/O feature

  Correct Answer: D

• Question 47:

  Which command can be used to display license information on an HPE StoreOnce system?

  A. license show

  B. info license

  C. license display

  D. show licenses

  Correct Answer: A

  Reference: https://developer.hpe.com/blog/using-the-ssmccli-hpe-3par-ansible-module-with-virtual-domains

• Question 48:

  A storage integrator is creating a domain in the 3PAR StoreServ Management Console (SSMC).

  Which settings of a 3PAR virtual domain have to be configured? (Choose two.)

  A. Name

  B. OpenLDAP server

  C. Active Directory Domain Controller

  D. Storage Controller

  E. Storage System

  Correct Answer: AE

• Question 49:

  A customer has two HPE StoreVirtual VSA instances installed on VMware vSphere hosts, 3TB of data allocated for both with 4TB VSA license. The customer has purchased an HPE StoreVirtual VSA 2014 Software Upgrade 4TB to 10TB upgrade license. The data store size is increased from 3TB to 10.5TB for both VMware servers.

  What is required to make the newly-added capacity available? (Choose two.)

  A. The VSA appliance needs to be restarted to rescan added storage and expand VSA RAID with the new capacity.

  B. The upgrade license requires that the VSA appliance is redeployed.

  C. The integrator must remove the current RAID configuration and create a new one after adding more storage to the VSA appliance.

  D. The VSA virtual appliance requires more memory and cpu resources.

  E. The VMware vmdk file needs to be extended from 3TB to 10TB for each VSA appliance. Then, VSA will detect the additional storage.

  Correct Answer: BE

  Reference: https://h20195.www2.hpe.com/v2/GetPDF.aspx%2Fc04111621.pdf

• Question 50:

  Refer to the exhibit.

  

  A customer complains of poor performance on an HPE MSA 2040 storage array. The storage administrator thinks that the host ports could be limiting factor because only two ports are connected to the SAN fabric. To verify this the administrator wants to use the performance monitor of the MSA system, but has never used this monitor before. The administrator logs on to a HPE MSA 2040 in the lab to get familiar with performance monitoring.

  Which value would indicate a host port performance issue?

  A. Read Response

  B. IOPS

  C. B/s

  D. Queue Depth

  Correct Answer: A