HP HP Certifications HPE6-A44 Questions & Answers

• Question 121:

  A branch office location has two buildings: an office and a small warehouse that are within 20 meters of each other. A RAP at the branch office provides connectivity to the corporate office network. This RAP is also configured as a Remote Mesh Portal (RMP).

  Which solution should the administrator implement to provide connectivity between the office and small warehouse buildings at the branch office location?

  A. Deploy a Remote Mesh Portal in the warehouse building to connect to the Remote Mesh Portal in the office building.

  B. Deploy a Remote Mesh Point AP in the warehouse building to connect to the Remote Mesh Portal in the office building.

  C. Deploy an ArubaOS-Switch in the warehouse building with tunneled node to connect to the Remote Mesh Portal in the office building.

  D. Deploy a Mesh Point AP in the warehouse building to connect to the Remote Mesh Portal in the office building.

  Correct Answer: A

• Question 122:

  An administrator creates service-based policies for AirGroup on the Mobility Master (MM). The administrator can define location-based policy limits based on which information?

  A. AP names, AP groups, controller names, and controller groups

  B. AP Fully Qualified Location Names (FQLNs) and controller Fully Qualified Domain Names (FQDNs)

  C. AP names, AP groups, and AP Fully Qualified Location Names (FQLNs)

  D. Controller names, controller groups, and controller Fully Qualified Domain Names (FQDNs)

  Correct Answer: C

  Reference: http://www.arubanetworks.com/techdocs/ArubaOS_81_Web_Help/Content/ArubaFrameStyles/ AirGroup/AirGroup_Features.htm

• Question 123:

  Refer to the exhibit.

  

  An administrator implements the MultiZone feature. The administrator sets up five zones as shown in the

  exhibit.

  -Zone A has six controllers that form a cluster.

  -Zone B has three controllers that from a cluster.

  -Zones C, D, and E have a single standalone controller each.

  A total of 13 VAPs are created across the five zones. A zone needs to accept RAP connections form

  branch offices. All zones have the same AP Group name. One of the zones will not accept connections

  from the MultiZone APs.

  Which could be a cause of this problem?

  A. RAPs are used in the configuration.

  B. The number of zones exceeds the maximum limit of four zones.

  C. AP Group names are different for each zone.

  D. The number of VAPs exceeds the maximum limit of 12 VAPs.

  Correct Answer: D

• Question 124:

  Refer to the exhibit.

  

  The administrator expects the AP to connect to a cluster, but the AP fails to connect. The administrator examines the configuration of an AP from apboot mode shown in the exhibit. What can the administrator determine about the configuration of the AP?

  A. The AP is configured to terminate on a non-cluster Mobility Controller.

  B. The AP is configured as a RAP to terminate on a stand-alone controller.

  C. The AP is configured as a RAP to terminate on a Mobility Master.

  D. The AP is configured to terminate on a Mobility Controller in a cluster.

  Correct Answer: C

• Question 125:

  Refer to the exhibit.

  

  A user uses Microsoft Windows for a wireless session. Based on the output shown in the exhibit for the selected Aruba AP, what is the possible problem with this user's wireless session?

  A. The AP has reached the limit for number of users that are allowed to connect to the radio.

  B. The controller cannot reach the AAA server to perform the authentication.

  C. The user is configured for PEAP, but the WLAN profile on the controller implemented EAP-TLS.

  D. The user misconfigured the Managed Network Settings profile in Windows.

  Correct Answer: A

• Question 126:

  Refer to the exhibit.

  

  Controllers are configured in a cluster as shown in the exhibit. These are the network details.

  -A Mobility Master (MM) managers the cluster.

  -The cluster contains two controllers: C1 and C2.

  -AP1 and AP2 use C1 as their Active AP Anchor Controller (A-AAC), with C2 as their Standby AAC (SAAC).

  -AP3 and AP4 use C2 as their A-AAC with, C1 as their S-AAC.

  User1 establishes a wireless connection via AP1, where the Active User Controller (U-UAC) assigned is

  C1, with C2 as the standby. What happens when User1 roams the wireless network and eventually their

  session is handled by AP3?

  A. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C1.

  B. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C2.

  C. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C2.

  D. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C1.

  Correct Answer: B

• Question 127:

  What is true about Aruba controllers under normal operations in a Mobility Master (MM)-Mobility Controller (MC) architecture?

  A. The Mobility Master can push a full configuration to a Mobility Controller.

  B. ARM must be used to optimize wireless performance.

  C. The APs can terminate on both Mobility Masters and Mobility Controllers.

  D. Any controller can perform local configurations.

  Correct Answer: C

• Question 128:

  Refer to the exhibit.

  

  An administrator configures a cluster with only the members shown in the exhibit. AP load balancing is enabled. There are no other cluster parameters configured. What occurs when a cluster member experiences a failure?

  A. High value sessions are synchronized.

  B. APs and clients are fully replicated.

  C. Connected users are de-authenticated

  D. APs reboot and rejoin the cluster.

  Correct Answer: D

• Question 129:

  An administrator purchases a RAP and has it shipped directly to a branch office. The branch office plugs in the RAP and the RAP contacts Aruba Activate. The RAP learns the Mobility Controller (MC) IP address and connects to it. However, the connection fails. Upon verifying the MC IP address in Aruba Activate, what should the administrator do to allow the RAP connection to succeed?

  A. Whitelist the RAP's IP address on the MC.

  B. Define the RAP's IPSec pre-shared key in Activate.

  C. Whitelist the RAP's certificate on the MC.

  D. Configure a VPN address pool in Activate.

  Correct Answer: A

• Question 130:

  An administrator has a standalone controller that runs ArubaOS 8.x software and wants to upgrade it to a

  newer release. The upgrade will be performed from the front panel of the physical controller. The

  administrator places the new software in the root directory of a USB drive. On the controller's LCD panel,

  no image is found.

  What is the cause of this problem?

  A. The image must be placed in the /Upgrade subdirectory.

  B. The image must be placed in the /Images subdirectory.

  C. The image must be placed in the /ArubaImage subdirectory.

  D. The upgrade must be performed from the controller's WebUI.

  Correct Answer: C

  Reference: https://www.arubanetworks.com/techdocs/ArubaOS_63_Web_Help/Content/ArubaFrameStyles/ Base_WLAN_Switch/Using_the_LCD.htm