Cisco CCNP Data Center 350-601 Questions & Answers

• Question 101:

  A network engineer must configure a Fibre Channel interface on the Cisco MDS 9000 Series Switch The configuration must meet these requirements

  1.

  The interface must be disabled when the bit errors threshold Is exceeded

  2.

  Buffer-to-buffer credits must be set to the maximum value

  3.

  The interface must have full bandwidth allocated for its port group

  Which command set configures a Fibre Channel interface that meets these requirements?

  A. interface fc1/1 switchport bit-errors switchport fcrxbbcredit 220 mode Fx switchport rate-mode dedicated

  B. interface fc1/1 switchport ignore bit-errors switchport fcrxbbcredit 255 mode Fx no switchport rate-mode

  C. interface fc1/1 no switchport ignore bit-errors switchport fcrxbbcredit 255 mode Fx switchport rate-mode dedicated

  D. interface fc1/1 no switchport bit-errors switchport fcrxbbcredit 220 mode Fx no switchport rate-mode

  Correct Answer: C

  "For 16-port switching modules and full rate ports, the default value is 16 for Fx mode and 255 for E or TE modes. The maximum value is 255 in all modes. This value can be changed as required."

• Question 102:

  Refer to the exhibit.

  

  An engineer must configure a Fibre Channel device alias named TEST for a device attached to port fc1/9 of a Cisco Nexus Series Switch. Which command set completes the configuration?

  

  A. Option A

  B. Option B

  C. Option C

  D. Option D

  Correct Answer: B

• Question 103:

  A company plans to migrate some of its services to the cloud. The company does not want to manage or control the underlying cloud infrastructure. It also wants to maintain control over the deployment of its applications and configuration settings of the application-hosting environment. Which cloud service model meets these requirements?

  A. Infrastructure as a Service

  B. Function as a Service

  C. Platform as a Service

  D. Software as a Service

  Correct Answer: C

• Question 104:

  Refer to the exhibit.

  

  A network engineer configures the VXLAN between the routers in a data center. The VLAN 10 must be extended between routers A and B. The initial VXLAN configuration is completed on Router A. Which configuration finishes the VXLAN configuration on Router A?

  

  A. Option A

  B. Option B

  C. Option C

  D. Option D

  Correct Answer: C

• Question 105:

  Refer to the exhibit.

  

  An engineer is configuring a Cisco MDS 9000 Series Switch for the first time. After the initial setup process, the name server at IP 192.168.10.11 is missing from the configuration. Which set of actions completes the configuration?

  A. Enter no at step 21 and reinitialize the installer. Press the Esc key to access ROMMON mode.

  B. Enter no at step 21 and reload the switch. Configure the advanced IP options.

  C. Enter yes at step 21 to edit the configuration. Add the line dns-server 192.168.10.11.

  D. Enter yes at step 21 and log in. Modify the startup configuration DNS

  Correct Answer: B

• Question 106:

  Refer to the exhibit.

  

  A network engineer is using tcpdump to capture a snapshot of OSPF-related traffic on a specific Cisco NX-OS switch port. For security reasons, the capture must be taken using an embedded container that is already deployed on the Cisco Nexus device. Which command completes the script?

  A. guestshell

  B. guestshell-bash

  C. run guestshell

  D. run bash

  Correct Answer: A

• Question 107:

  A network architect must design an automation solution to initially support networking and also support the server infrastructure in the future. To keep configuration consistency, the network team requires a solution that enforces the desired state of the network and reverts any manual configuration. Which solution meets these goals?

  A. NX-API

  B. Ansible

  C. Terraform

  D. Puppet

  Correct Answer: D

• Question 108:

  An engineer must integrate Cisco ACI with a VMware vSphere environment. The requirement is to use a VMware Distributed Virtual Switch and to assign the encapsulation VLAN of the EPG from the VLAN pool. Which configuration set accomplishes this goa?

  A. Create a VMM domain association under the EPGs Create a VLAN pool with static alocated VLANs.

  B. Create a physical domain association under the EPGs Create a VLAN pool with static alocated VLANs.

  C. Create a physical domain association under the EPGs. Create a VLAN pool with oVnarmc alocated VLANs

  D. Create a VMM domain association under the EPGs Create a VLAN pool with dynamic alocated VLANs.

  Correct Answer: D

• Question 109:

  A network engineer must migrate a Cisco WSA virtual appliance from one physical host to another physical host by using VMware vMotion. What is a requirement for both physical hosts?

  A. The hosts must run Cisco AsyncOS 10.0 or greater.

  B. The hosts must have access to the same defined network.

  C. The hosts must run different versions of Cisco AsyncOS.

  D. The hosts must use a different datastore than the virtual appliance

  Correct Answer: B

• Question 110:

  An engineer deploys a new Cisco Nexus 5000 Series Switch in an existing environment with strict security policies. The new device should meet these requirements:

  1.

  Secure end-user ports with minimum configuration effort.

  2.

  Log security breaches and require manual recovery.

  3.

  Retain the switch configuration if the device restarts.

  Which configuration must be used?

  A. switchport port-security switchport port-security max 1 switchport port-security mac-address sticky

  B. switchport port-security switchport port-security violation restrict switchport port-security mac-address sticky

  C. switchport port-security switchport port-security violation shutdown switchport port-security mac-address dynamic

  D. switchport port-security switchport port-security max 1 switchport port-security violation shutdown

  Correct Answer: A